eDP panels usually have EDID EEPROM, so there's no need to define panel width/height or any modes/timings in dts. But this panel still may have regulator and/or backlight. Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx> --- .../devicetree/bindings/display/panel/panel-edp.txt | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/panel-edp.txt diff --git a/Documentation/devicetree/bindings/display/panel/panel-edp.txt b/Documentation/devicetree/bindings/display/panel/panel-edp.txt new file mode 100644 index 000000000000..fc7a0868048e --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-edp.txt @@ -0,0 +1,7 @@ +Generic eDP Display Panel + +Required properties: + - compatible: "panel-edp" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. -- 2.20.1
