The Ben Nanonote from Qi Hardware expects a specific OOB layout on its
NAND. If the "ingenic,oob-layout" device property is set to "qi,lb60",
this specific OOB layout is used.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
Changes:
v2: New patch
drivers/mtd/nand/raw/ingenic/jz4780_nand.c | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_nand.c b/drivers/mtd/nand/raw/ingenic/jz4780_nand.c
index baebb9a5c7c8..4b304eceae8d 100644
--- a/drivers/mtd/nand/raw/ingenic/jz4780_nand.c
+++ b/drivers/mtd/nand/raw/ingenic/jz4780_nand.c
@@ -346,6 +346,41 @@ static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
return 0;
}
+static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section || !ecc->total)
+ return -ERANGE;
+
+ oobregion->length = ecc->total;
+ oobregion->offset = 12;
+
+ return 0;
+}
+
+static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - ecc->total - 12;
+ oobregion->offset = 12 + ecc->total;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
+ .ecc = qi_lb60_ooblayout_ecc,
+ .free = qi_lb60_ooblayout_free,
+};
+
static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
@@ -409,6 +444,8 @@ static int jz4780_nand_probe(struct platform_device *pdev)
if (!ret) {
if (!strcmp(layout, "ingenic,jz4725b")) {
nfc->oob_layout = &jz4725b_ooblayout_ops;
+ } else if (!strcmp(layout, "qi,lb60")) {
+ nfc->oob_layout = &qi_lb60_ooblayout_ops;
} else {
dev_err(dev, "Unrecognized OOB layout %s\n", layout);
return -EINVAL;
--
2.20.1
