Hello @all, in the meantime all interfaces are supported. Following a short overview. > * RAM: 2GB (!) DDR3L > * PMU: NXP VR5100 > * Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, > * mSATA 3.0 > * Connectivity: 2x Ethernet > * miniPCIe > * SD Card > * USB: 2x USB3.0 > * I2C x 2: 2x 96Boards Expansion Connector > * UART x 2: 1 x Terminal and 1x 96Boards Expansion Connector > * SPI: 1x 96Boards Expansion Connector > * GPIOs The first 96Board Community Header Board will be available in March, this is currently in production. I will put the schematics online soon. If you have any information missing please let me know. Best regards, Michael -- Tel.: +49 (0)8142/30505-0 Fax: +49 (0)8142/30505-50 Mail: m.bittner@xxxxxxxxxxxxxxx Internet: www.ebs-systart.com EBS-SYSTART GmbH Industriestraße 33a D-82194 Gröbenzell Amtsgericht München, HRB 70338, UST-IdNr. DE128221970 Geschäftsführer: Michael Bittner -----Ursprüngliche Nachricht----- Von: Manivannan Sadhasivam [mailto:manivannan.sadhasivam@xxxxxxxxxx] Gesendet: Freitag, 1. Februar 2019 04:28 An: shawnguo@xxxxxxxxxx Cc: leoyang.li@xxxxxxx; robh+dt@xxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; a.tropschug@xxxxxxxxxxxxxxx; m.bittner@xxxxxxxxxxxxxxx; amit.kucheria@xxxxxxxxxx Betreff: Re: [PATCH v3 0/5] Add Oxalis board support On Tue, Jan 22, 2019 at 09:51:42AM +0530, Manivannan Sadhasivam wrote: > Hello, > > This patchset adds Oxalis board support. This board is one of the > 96Boards Enterprise Edition platform from EBS-SYSTART GmbH. Below are some > of the key features of this board: > > * SoC: NXP Layerscape LS1012A > * RAM: 1GB DDR3L > * PMU: NXP VR5100 > * Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA > * Connectivity: 2x Ethernet > * USB: 2x USB3.0 > > More information about this board can be found in 96Boards product > page: https://www.96boards.org/product/oxalis/ > > Ethernet and SPI flash are not supported yet! > > Thanks, > Mani > Hi Shawn, Any update on this patchset? Thanks, Mani > Changes in v3: > > * Fixed LS1012A and LS1021A bindings > * Added missing devicetree compatibles for LS1021A based boards > * Added Rob's Reviewed-by tag for Vendor prefix patch > > Changes in v2: > > As per Rob's review: > > * Adopted the Oxalis board binding to JSON format. > * Sorted the EBS-SYSTART vendor prefix alphabetically. > * Used the generic node name for audio codec. > > Manivannan Sadhasivam (5): > dt-bindings: arm: fsl: Fix bindings for LS1012A and LS1021A based > boards > ARM: dts: Add devicetree compatibles for LS1021A based boards > dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix > dt-bindings: arm: fsl: Add devicetree binding for Oxalis > arm64: dts: freescale: Add devicetree for Oxalis > > .../devicetree/bindings/arm/fsl.yaml | 11 ++- > .../devicetree/bindings/vendor-prefixes.txt | 1 + > arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 1 + > arch/arm/boot/dts/ls1021a-qds.dts | 1 + > arch/arm/boot/dts/ls1021a-twr.dts | 1 + > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++ > 7 files changed, 111 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts > > -- > 2.17.1 >
