The GTA04 has a w2sg0004 or w2sg0084 gps chip. Not detectable
which one is mounted so use the compatibility entry for w2sg0004
for all which will work for both.
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
Changes in v3:
- converted to a patchset
- added vcc-supply
Changes in v2:
- some s/gps/gnss/
- not added vcc-supply because the regulator is not modelled
in dts at all
w2sg0004 bindings are in next-20190129
arch/arm/boot/dts/omap3-gta04.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 02d8274a2f47..4ea0f7dc37c6 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -320,6 +320,12 @@
>;
};
+ gps_pins: pinmux_gps_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
+ >;
+ };
+
hdq_pins: hdq_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
@@ -652,6 +658,14 @@
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
+ gnss: gnss {
+ compatible = "wi2wi,w2sg0004";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gps_pins>;
+ sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ lna-supply = <&vsim>;
+ vcc-supply = <&ldo_3v3>;
+ };
};
&uart3 {
--
2.11.0
