From: Siva Reddy <siva.kallam@xxxxxxxxxxx> This patch adds support for Samsung 10Gb ethernet driver(sxgbe). - sxgbe core initialization - Tx and Rx support - MDIO support - ISRs for Tx and Rx - ifconfig support to driver Signed-off-by: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> Signed-off-by: Vipul Pandya <vipul.pandya@xxxxxxxxxxx> Signed-off-by: Girish K S <ks.giri@xxxxxxxxxxx> Neatening-by: Joe Perches <joe@xxxxxxxxxxx> Signed-off-by: Byungho An <bh74.an@xxxxxxxxxxx> --- drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/samsung/Kconfig | 20 + drivers/net/ethernet/samsung/Makefile | 5 + drivers/net/ethernet/samsung/sxgbe/Kconfig | 9 + drivers/net/ethernet/samsung/sxgbe/Makefile | 4 + drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h | 459 +++++ drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c | 157 ++ drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c | 515 +++++ drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h | 291 +++ drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c | 377 ++++ drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h | 49 + drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c | 44 + drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 2059 ++++++++++++++++++++ drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c | 271 +++ drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c | 252 +++ drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h | 104 + .../net/ethernet/samsung/sxgbe/sxgbe_platform.c | 258 +++ drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h | 477 +++++ drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c | 92 + drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h | 38 + include/linux/sxgbe_platform.h | 54 + 22 files changed, 5537 insertions(+) create mode 100644 drivers/net/ethernet/samsung/Kconfig create mode 100644 drivers/net/ethernet/samsung/Makefile create mode 100644 drivers/net/ethernet/samsung/sxgbe/Kconfig create mode 100644 drivers/net/ethernet/samsung/sxgbe/Makefile create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h create mode 100644 include/linux/sxgbe_platform.h diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 506b024..d4545fa 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -149,6 +149,7 @@ config S6GMAC To compile this driver as a module, choose M here. The module will be called s6gmac. +source "drivers/net/ethernet/samsung/Kconfig" source "drivers/net/ethernet/seeq/Kconfig" source "drivers/net/ethernet/silan/Kconfig" source "drivers/net/ethernet/sis/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index c0b8789..2a53f84 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ obj-$(CONFIG_SH_ETH) += renesas/ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ obj-$(CONFIG_S6GMAC) += s6gmac.o +obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/ obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/ obj-$(CONFIG_NET_VENDOR_SILAN) += silan/ obj-$(CONFIG_NET_VENDOR_SIS) += sis/ diff --git a/drivers/net/ethernet/samsung/Kconfig b/drivers/net/ethernet/samsung/Kconfig new file mode 100644 index 0000000..b78d669 --- /dev/null +++ b/drivers/net/ethernet/samsung/Kconfig @@ -0,0 +1,20 @@ +# +# Samsung Ethernet device configuration +# + +config NET_VENDOR_SAMSUNG + bool "Samsung Ethernet device" + default y + depends on HAS_IOMEM && HAS_DMA + select PHYLIB + select CRC32 + select PTP_1588_CLOCK + ---help--- + This is the driver for the SXGBE 10G Ethernet IP block found on Samsung + platforms. + +if NET_VENDOR_SAMSUNG + +source "drivers/net/ethernet/samsung/sxgbe/Kconfig" + +endif # NET_VENDOR_SAMSUNG diff --git a/drivers/net/ethernet/samsung/Makefile b/drivers/net/ethernet/samsung/Makefile new file mode 100644 index 0000000..1773c29 --- /dev/null +++ b/drivers/net/ethernet/samsung/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Samsung Ethernet device drivers. +# + +obj-$(CONFIG_SXGBE_ETH) += sxgbe/ diff --git a/drivers/net/ethernet/samsung/sxgbe/Kconfig b/drivers/net/ethernet/samsung/sxgbe/Kconfig new file mode 100644 index 0000000..d79288c --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/Kconfig @@ -0,0 +1,9 @@ +config SXGBE_ETH + tristate "Samsung 10G/2.5G/1G SXGBE Ethernet driver" + depends on HAS_IOMEM && HAS_DMA + select PHYLIB + select CRC32 + select PTP_1588_CLOCK + ---help--- + This is the driver for the SXGBE 10G Ethernet IP block found on Samsung + platforms. diff --git a/drivers/net/ethernet/samsung/sxgbe/Makefile b/drivers/net/ethernet/samsung/sxgbe/Makefile new file mode 100644 index 0000000..dcc80b9 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_SXGBE_ETH) += samsung-sxgbe.o +samsung-sxgbe-objs:= sxgbe_platform.o sxgbe_main.o sxgbe_desc.o \ + sxgbe_dma.o sxgbe_core.o sxgbe_mtl.o sxgbe_mdio.o \ + sxgbe_ethtool.o sxgbe_xpcs.o $(samsung-sxgbe-y) diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h new file mode 100644 index 0000000..587b691 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h @@ -0,0 +1,459 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SXGBE_COMMON_H__ +#define __SXGBE_COMMON_H__ + +/* forward references */ +struct sxgbe_desc_ops; +struct sxgbe_dma_ops; +struct sxgbe_mtl_ops; + +#define SXGBE_RESOURCE_NAME "sam_sxgbeeth" +#define DRV_MODULE_VERSION "November_2013" + +/* MAX HW feature words */ +#define SXGBE_HW_WORDS 3 + +#define SXGBE_RX_COE_NONE 0 + +/* CSR Frequency Access Defines*/ +#define SXGBE_CSR_F_150M 150000000 +#define SXGBE_CSR_F_250M 250000000 +#define SXGBE_CSR_F_300M 300000000 +#define SXGBE_CSR_F_350M 350000000 +#define SXGBE_CSR_F_400M 400000000 +#define SXGBE_CSR_F_500M 500000000 + +/* pause time */ +#define SXGBE_PAUSE_TIME 0x200 + +/* tx queues */ +#define SXGBE_TX_QUEUES 8 +#define SXGBE_RX_QUEUES 16 + +/* Max/Min RI Watchdog Timer count value */ +#define SXGBE_MAX_DMA_RIWT 0xff +#define SXGBE_MIN_DMA_RIWT 0x20 + +/* Tx coalesce parameters */ +#define SXGBE_COAL_TX_TIMER 40000 +#define SXGBE_MAX_COAL_TX_TICK 100000 +#define SXGBE_TX_MAX_FRAMES 512 +#define SXGBE_TX_FRAMES 128 + +/* SXGBE TX FIFO is 8K, Rx FIFO is 16K */ +#define BUF_SIZE_16KiB 16384 +#define BUF_SIZE_8KiB 8192 +#define BUF_SIZE_4KiB 4096 +#define BUF_SIZE_2KiB 2048 + +#define SXGBE_DEFAULT_LIT_LS 0x3E8 +#define SXGBE_DEFAULT_TWT_LS 0x0 + +/* Flow Control defines */ +#define SXGBE_FLOW_OFF 0 +#define SXGBE_FLOW_RX 1 +#define SXGBE_FLOW_TX 2 +#define SXGBE_FLOW_AUTO (SXGBE_FLOW_TX | SXGBE_FLOW_RX) + +#define SF_DMA_MODE 1 /* DMA STORE-AND-FORWARD Operation Mode */ + +/* errors */ +#define RX_GMII_ERR 0x01 +#define RX_WATCHDOG_ERR 0x02 +#define RX_CRC_ERR 0x03 +#define RX_GAINT_ERR 0x04 +#define RX_IP_HDR_ERR 0x05 +#define RX_PAYLOAD_ERR 0x06 +#define RX_OVERFLOW_ERR 0x07 + +/* pkt type */ +#define RX_LEN_PKT 0x00 +#define RX_MACCTL_PKT 0x01 +#define RX_DCBCTL_PKT 0x02 +#define RX_ARP_PKT 0x03 +#define RX_OAM_PKT 0x04 +#define RX_UNTAG_PKT 0x05 +#define RX_OTHER_PKT 0x07 +#define RX_SVLAN_PKT 0x08 +#define RX_CVLAN_PKT 0x09 +#define RX_DVLAN_OCVLAN_ICVLAN_PKT 0x0A +#define RX_DVLAN_OSVLAN_ISVLAN_PKT 0x0B +#define RX_DVLAN_OSVLAN_ICVLAN_PKT 0x0C +#define RX_DVLAN_OCVLAN_ISVLAN_PKT 0x0D + +#define RX_NOT_IP_PKT 0x00 +#define RX_IPV4_TCP_PKT 0x01 +#define RX_IPV4_UDP_PKT 0x02 +#define RX_IPV4_ICMP_PKT 0x03 +#define RX_IPV4_UNKNOWN_PKT 0x07 +#define RX_IPV6_TCP_PKT 0x09 +#define RX_IPV6_UDP_PKT 0x0A +#define RX_IPV6_ICMP_PKT 0x0B +#define RX_IPV6_UNKNOWN_PKT 0x0F + +#define RX_NO_PTP 0x00 +#define RX_PTP_SYNC 0x01 +#define RX_PTP_FOLLOW_UP 0x02 +#define RX_PTP_DELAY_REQ 0x03 +#define RX_PTP_DELAY_RESP 0x04 +#define RX_PTP_PDELAY_REQ 0x05 +#define RX_PTP_PDELAY_RESP 0x06 +#define RX_PTP_PDELAY_FOLLOW_UP 0x07 +#define RX_PTP_ANNOUNCE 0x08 +#define RX_PTP_MGMT 0x09 +#define RX_PTP_SIGNAL 0x0A +#define RX_PTP_RESV_MSG 0x0F + +enum dma_irq_status { + tx_hard_error = BIT(0), + tx_bump_tc = BIT(1), + handle_tx = BIT(2), + rx_hard_error = BIT(3), + rx_bump_tc = BIT(4), + handle_rx = BIT(5), +}; + +#define NETIF_F_HW_VLAN_ALL (NETIF_F_HW_VLAN_CTAG_RX | \ + NETIF_F_HW_VLAN_STAG_RX | \ + NETIF_F_HW_VLAN_CTAG_TX | \ + NETIF_F_HW_VLAN_STAG_TX | \ + NETIF_F_HW_VLAN_CTAG_FILTER | \ + NETIF_F_HW_VLAN_STAG_FILTER) + +/* MMC control defines */ +#define SXGBE_MMC_CTRL_CNT_FRZ 0x00000008 + +/* SXGBE HW ADDR regs */ +#define SXGBE_ADDR_HIGH(reg) (((reg > 15) ? 0x00000800 : 0x00000040) + \ + (reg * 8)) +#define SXGBE_ADDR_LOW(reg) (((reg > 15) ? 0x00000804 : 0x00000044) + \ + (reg * 8)) +#define SXGBE_MAX_PERFECT_ADDRESSES 32 /* Maximum unicast perfect filtering */ +#define SXGBE_FRAME_FILTER 0x00000004 /* Frame Filter */ + +/* SXGBE Frame Filter defines */ +#define SXGBE_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */ +#define SXGBE_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */ +#define SXGBE_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */ +#define SXGBE_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */ +#define SXGBE_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */ +#define SXGBE_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */ +#define SXGBE_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */ +#define SXGBE_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */ +#define SXGBE_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */ +#define SXGBE_FRAME_FILTER_RA 0x80000000 /* Receive all mode */ + +#define SXGBE_HASH_TABLE_SIZE 64 +#define SXGBE_HASH_HIGH 0x00000008 /* Multicast Hash Table High */ +#define SXGBE_HASH_LOW 0x0000000c /* Multicast Hash Table Low */ + +#define SXGBE_HI_REG_AE 0x80000000 + +/* Minimum and maximum MTU */ +#define MIN_MTU 68 +#define MAX_MTU 9000 + +#define SXGBE_FOR_EACH_QUEUE(max_queues, queue_num) \ + for (queue_num = 0; queue_num < max_queues; queue_num++) + +/* sxgbe statistics counters */ +struct sxgbe_extra_stats { + /* TX/RX IRQ events */ + unsigned long tx_underflow_irq; + unsigned long tx_process_stopped_irq; + unsigned long tx_ctxt_desc_err; + unsigned long tx_threshold; + unsigned long rx_threshold; + unsigned long tx_pkt_n; + unsigned long rx_pkt_n; + unsigned long normal_irq_n; + unsigned long tx_normal_irq_n; + unsigned long rx_normal_irq_n; + unsigned long napi_poll; + unsigned long tx_clean; + unsigned long tx_reset_ic_bit; + unsigned long rx_process_stopped_irq; + unsigned long rx_underflow_irq; + + /* Bus access errors */ + unsigned long fatal_bus_error_irq; + unsigned long tx_read_transfer_err; + unsigned long tx_write_transfer_err; + unsigned long tx_desc_access_err; + unsigned long tx_buffer_access_err; + unsigned long tx_data_transfer_err; + unsigned long rx_read_transfer_err; + unsigned long rx_write_transfer_err; + unsigned long rx_desc_access_err; + unsigned long rx_buffer_access_err; + unsigned long rx_data_transfer_err; + + /* RX specific */ + /* L2 error */ + unsigned long rx_code_gmii_err; + unsigned long rx_watchdog_err; + unsigned long rx_crc_err; + unsigned long rx_gaint_pkt_err; + unsigned long ip_hdr_err; + unsigned long ip_payload_err; + unsigned long overflow_error; + + /* L2 Pkt type */ + unsigned long len_pkt; + unsigned long mac_ctl_pkt; + unsigned long dcb_ctl_pkt; + unsigned long arp_pkt; + unsigned long oam_pkt; + unsigned long untag_okt; + unsigned long other_pkt; + unsigned long svlan_tag_pkt; + unsigned long cvlan_tag_pkt; + unsigned long dvlan_ocvlan_icvlan_pkt; + unsigned long dvlan_osvlan_isvlan_pkt; + unsigned long dvlan_osvlan_icvlan_pkt; + unsigned long dvan_ocvlan_icvlan_pkt; + + /* L3/L4 Pkt type */ + unsigned long not_ip_pkt; + unsigned long ip4_tcp_pkt; + unsigned long ip4_udp_pkt; + unsigned long ip4_icmp_pkt; + unsigned long ip4_unknown_pkt; + unsigned long ip6_tcp_pkt; + unsigned long ip6_udp_pkt; + unsigned long ip6_icmp_pkt; + unsigned long ip6_unknown_pkt; + + /* Filter specific */ + unsigned long vlan_filter_match; + unsigned long sa_filter_fail; + unsigned long da_filter_fail; + unsigned long hash_filter_pass; + unsigned long l3_filter_match; + unsigned long l4_filter_match; + + /* RX context specific */ + unsigned long timestamp_dropped; + unsigned long rx_msg_type_no_ptp; + unsigned long rx_ptp_type_sync; + unsigned long rx_ptp_type_follow_up; + unsigned long rx_ptp_type_delay_req; + unsigned long rx_ptp_type_delay_resp; + unsigned long rx_ptp_type_pdelay_req; + unsigned long rx_ptp_type_pdelay_resp; + unsigned long rx_ptp_type_pdelay_follow_up; + unsigned long rx_ptp_announce; + unsigned long rx_ptp_mgmt; + unsigned long rx_ptp_signal; + unsigned long rx_ptp_resv_msg_type; +}; + +struct mac_link { + int port; + int duplex; + int speed; +}; + +struct mii_regs { + unsigned int addr; /* MII Address */ + unsigned int data; /* MII Data */ +}; + +struct sxgbe_core_ops { + /* MAC core initialization */ + void (*core_init)(void __iomem *ioaddr); + /* Dump MAC registers */ + void (*dump_regs)(void __iomem *ioaddr); + /* Handle extra events on specific interrupts hw dependent */ + int (*host_irq_status)(void __iomem *ioaddr, + struct sxgbe_extra_stats *x); + /* Set power management mode (e.g. magic frame) */ + void (*pmt)(void __iomem *ioaddr, unsigned long mode); + /* Set/Get Unicast MAC addresses */ + void (*set_umac_addr)(void __iomem *ioaddr, unsigned char *addr, + unsigned int reg_n); + void (*get_umac_addr)(void __iomem *ioaddr, unsigned char *addr, + unsigned int reg_n); + void (*enable_rx)(void __iomem *ioaddr, bool enable); + void (*enable_tx)(void __iomem *ioaddr, bool enable); + + /* controller version specific operations */ + int (*get_controller_version)(void __iomem *ioaddr); + + /* If supported then get the optional core features */ + unsigned int (*get_hw_feature)(void __iomem *ioaddr, + unsigned char feature_index); + /* adjust SXGBE speed */ + void (*set_speed)(void __iomem *ioaddr, unsigned char speed); +}; + +const struct sxgbe_core_ops *sxgbe_get_core_ops(void); + +struct sxgbe_ops { + const struct sxgbe_core_ops *mac; + const struct sxgbe_desc_ops *desc; + const struct sxgbe_dma_ops *dma; + const struct sxgbe_mtl_ops *mtl; + struct mii_regs mii; /* MII register Addresses */ + struct mac_link link; + unsigned int ctrl_uid; + unsigned int ctrl_id; +}; + +/* SXGBE private data structures */ +struct sxgbe_tx_queue { + unsigned int irq_no; + struct sxgbe_priv_data *priv_ptr; + struct sxgbe_tx_norm_desc *dma_tx; + dma_addr_t dma_tx_phy; + dma_addr_t *tx_skbuff_dma; + struct sk_buff **tx_skbuff; + struct timer_list txtimer; + spinlock_t tx_lock; /* lock for tx queues */ + unsigned int cur_tx; + unsigned int dirty_tx; + u32 tx_count_frames; + u32 tx_coal_frames; + u32 tx_coal_timer; + int hwts_tx_en; + u8 queue_no; +}; + +struct sxgbe_rx_queue { + struct sxgbe_priv_data *priv_ptr; + struct sxgbe_rx_norm_desc *dma_rx; + struct sk_buff **rx_skbuff; + unsigned int cur_rx; + unsigned int dirty_rx; + unsigned int irq_no; + u32 rx_riwt; + dma_addr_t *rx_skbuff_dma; + dma_addr_t dma_rx_phy; + u8 queue_no; +}; + +/* SXGBE HW capabilities */ +struct sxgbe_hw_features { + /****** CAP [0] *******/ + unsigned int pmt_remote_wake_up; + unsigned int pmt_magic_frame; + /* IEEE 1588-2008 */ + unsigned int atime_stamp; + + unsigned int tx_csum_offload; + unsigned int rx_csum_offload; + unsigned int multi_macaddr; + unsigned int tstamp_srcselect; + unsigned int sa_vlan_insert; + + /****** CAP [1] *******/ + unsigned int rxfifo_size; + unsigned int txfifo_size; + unsigned int atstmap_hword; + unsigned int dcb_enable; + unsigned int splithead_enable; + unsigned int tcpseg_offload; + unsigned int debug_mem; + unsigned int rss_enable; + unsigned int hash_tsize; + unsigned int l3l4_filer_size; + + /* This value is in bytes and + * as mentioned in HW features + * of SXGBE data book + */ + unsigned int rx_mtl_qsize; + unsigned int tx_mtl_qsize; + + /****** CAP [2] *******/ + /* TX and RX number of channels */ + unsigned int rx_mtl_queues; + unsigned int tx_mtl_queues; + unsigned int rx_dma_channels; + unsigned int tx_dma_channels; + unsigned int pps_output_count; + unsigned int aux_input_count; +}; + +struct sxgbe_priv_data { + /* DMA descriptos */ + struct sxgbe_tx_queue *txq[SXGBE_TX_QUEUES]; + struct sxgbe_rx_queue *rxq[SXGBE_RX_QUEUES]; + u8 cur_rx_qnum; + + unsigned int dma_tx_size; + unsigned int dma_rx_size; + unsigned int dma_buf_sz; + u32 rx_riwt; + + struct napi_struct napi; + + void __iomem *ioaddr; + struct net_device *dev; + struct device *device; + struct sxgbe_ops *hw; /* sxgbe specific ops */ + int no_csum_insertion; + int irq; + spinlock_t stats_lock; /* lock for tx/rx statatics */ + + struct phy_device *phydev; + int oldlink; + int speed; + int oldduplex; + struct mii_bus *mii; + int mii_irq[PHY_MAX_ADDR]; + u8 rx_pause; + u8 tx_pause; + + struct sxgbe_extra_stats xstats; + struct sxgbe_plat_data *plat; + struct sxgbe_hw_features hw_cap; + + u32 msg_enable; + + struct clk *sxgbe_clk; + int clk_csr; + unsigned int mode; + unsigned int default_addend; + + /* advanced time stamp support */ + u32 adv_ts; + int use_riwt; + + /* tc control */ + int tx_tc; + int rx_tc; +}; + +/* Function prototypes */ +struct sxgbe_priv_data *sxgbe_dvr_probe(struct device *device, + struct sxgbe_plat_data *plat_dat, + void __iomem *addr); +int sxgbe_dvr_remove(struct net_device *ndev); +void sxgbe_set_ethtool_ops(struct net_device *netdev); +int sxgbe_mdio_unregister(struct net_device *ndev); +int sxgbe_mdio_register(struct net_device *ndev); +int sxgbe_register_platform(void); +void sxgbe_unregister_platform(void); + +#ifdef CONFIG_PM +int sxgbe_suspend(struct net_device *ndev); +int sxgbe_resume(struct net_device *ndev); +int sxgbe_freeze(struct net_device *ndev); +int sxgbe_restore(struct net_device *ndev); +#endif /* CONFIG_PM */ + +const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void); + +#endif /* __SXGBE_COMMON_H__ */ diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c new file mode 100644 index 0000000..17eea58 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c @@ -0,0 +1,157 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/export.h> +#include <linux/io.h> +#include <linux/netdevice.h> +#include <linux/phy.h> + +#include "sxgbe_common.h" +#include "sxgbe_reg.h" + +/* MAC core initialization */ +static void sxgbe_core_init(void __iomem *ioaddr) +{ + u32 regval; + /* TX configuration */ + regval = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG); + /* Other configurable parameters IFP, IPG, ISR, ISM + * needs to be set if needed + */ + regval |= SXGBE_TX_JABBER_DISABLE; + writel(regval, ioaddr + SXGBE_CORE_TX_CONFIG_REG); + + /* RX configuration */ + regval = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG); + /* Other configurable parameters CST, SPEN, USP, GPSLCE + * WD, LM, S2KP, HDSMS, GPSL, ELEN, ARPEN needs to be + * set if needed + */ + regval |= SXGBE_RX_JUMBPKT_ENABLE | SXGBE_RX_ACS_ENABLE; + writel(regval, ioaddr + SXGBE_CORE_RX_CONFIG_REG); +} + +/* Dump MAC registers */ +static void sxgbe_core_dump_regs(void __iomem *ioaddr) +{ +} + +/* Handle extra events on specific interrupts hw dependent */ +static int sxgbe_core_host_irq_status(void __iomem *ioaddr, + struct sxgbe_extra_stats *x) +{ + return 0; +} + +/* Set power management mode (e.g. magic frame) */ +static void sxgbe_core_pmt(void __iomem *ioaddr, unsigned long mode) +{ +} + +/* Set/Get Unicast MAC addresses */ +static void sxgbe_core_set_umac_addr(void __iomem *ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + u32 high_word, low_word; + + high_word = (addr[5] << 8) || (addr[4]); + low_word = ((addr[3] << 24) || (addr[2] << 16) || + (addr[1] << 8) || (addr[0])); + writel(high_word, ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n)); + writel(low_word, ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n)); +} + +static void sxgbe_core_get_umac_addr(void __iomem *ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + u32 high_word, low_word; + + high_word = readl(ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n)); + low_word = readl(ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n)); + + /* extract and assign address */ + addr[5] = (high_word & 0x0000FF00) >> 8; + addr[4] = (high_word & 0x000000FF); + addr[3] = (low_word & 0xFF000000) >> 24; + addr[2] = (low_word & 0x00FF0000) >> 16; + addr[1] = (low_word & 0x0000FF00) >> 8; + addr[0] = (low_word & 0x000000FF); +} + +static void sxgbe_enable_tx(void __iomem *ioaddr, bool enable) +{ + u32 tx_config; + + tx_config = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG); + tx_config &= ~SXGBE_TX_ENABLE; + + if (enable) + tx_config |= SXGBE_TX_ENABLE; + writel(tx_config, ioaddr + SXGBE_CORE_TX_CONFIG_REG); +} + +static void sxgbe_enable_rx(void __iomem *ioaddr, bool enable) +{ + u32 rx_config; + + rx_config = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG); + rx_config &= ~SXGBE_RX_ENABLE; + + if (enable) + rx_config |= SXGBE_RX_ENABLE; + writel(rx_config, ioaddr + SXGBE_CORE_RX_CONFIG_REG); +} + +static int sxgbe_get_controller_version(void __iomem *ioaddr) +{ + return readl(ioaddr + SXGBE_CORE_VERSION_REG); +} + +/* If supported then get the optional core features */ +static unsigned int sxgbe_get_hw_feature(void __iomem *ioaddr, + unsigned char feature_index) +{ + return readl(ioaddr + (SXGBE_CORE_HW_FEA_REG(feature_index))); +} + +static void sxgbe_core_set_speed(void __iomem *ioaddr, unsigned char speed) +{ + u32 tx_cfg = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG); + + /* clear the speed bits */ + tx_cfg &= ~0x60000000; + tx_cfg |= (speed << SXGBE_SPEED_LSHIFT); + + /* set the speed */ + writel(tx_cfg, ioaddr + SXGBE_CORE_TX_CONFIG_REG); +} + +const struct sxgbe_core_ops core_ops = { + .core_init = sxgbe_core_init, + .dump_regs = sxgbe_core_dump_regs, + .host_irq_status = sxgbe_core_host_irq_status, + .pmt = sxgbe_core_pmt, + .set_umac_addr = sxgbe_core_set_umac_addr, + .get_umac_addr = sxgbe_core_get_umac_addr, + .enable_rx = sxgbe_enable_rx, + .enable_tx = sxgbe_enable_tx, + .get_controller_version = sxgbe_get_controller_version, + .get_hw_feature = sxgbe_get_hw_feature, + .set_speed = sxgbe_core_set_speed, +}; + +const struct sxgbe_core_ops *sxgbe_get_core_ops(void) +{ + return &core_ops; +} diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c new file mode 100644 index 0000000..62d542c --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c @@ -0,0 +1,515 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bitops.h> +#include <linux/export.h> +#include <linux/io.h> +#include <linux/netdevice.h> +#include <linux/phy.h> + +#include "sxgbe_common.h" +#include "sxgbe_dma.h" +#include "sxgbe_desc.h" + +/* DMA TX descriptor ring initialization */ +static void sxgbe_init_tx_desc(struct sxgbe_tx_norm_desc *p) +{ + p->tdes23.tx_rd_des23.own_bit = 0; +} + +static void sxgbe_tx_desc_enable_tse(struct sxgbe_tx_norm_desc *p, u8 is_tse, + u32 total_hdr_len, u32 tcp_hdr_len, + u32 tcp_payload_len) +{ + p->tdes23.tx_rd_des23.tse_bit = is_tse; + p->tdes23.tx_rd_des23.buf1_size = total_hdr_len; + p->tdes23.tx_rd_des23.tcp_hdr_len = tcp_hdr_len / 4; + p->tdes23.tx_rd_des23.tx_pkt_len.tcp_payload_len = tcp_payload_len; +} + +/* Assign buffer lengths for descriptor */ +static void sxgbe_prepare_tx_desc(struct sxgbe_tx_norm_desc *p, u8 is_fd, + int buf1_len, int pkt_len, int cksum) +{ + p->tdes23.tx_rd_des23.first_desc = is_fd; + p->tdes23.tx_rd_des23.buf1_size = buf1_len; + + p->tdes23.tx_rd_des23.tx_pkt_len.cksum_pktlen.total_pkt_len = pkt_len; + + if (cksum) + p->tdes23.tx_rd_des23.tx_pkt_len.cksum_pktlen.cksum_ctl = + cic_full; +} + +/* Set VLAN control information */ +static void sxgbe_tx_vlanctl_desc(struct sxgbe_tx_norm_desc *p, int vlan_ctl) +{ + p->tdes23.tx_rd_des23.vlan_tag_ctl = vlan_ctl; +} + +/* Set the owner of Normal descriptor */ +static void sxgbe_set_tx_owner(struct sxgbe_tx_norm_desc *p) +{ + p->tdes23.tx_rd_des23.own_bit = 1; +} +/* Get the owner of Normal descriptor */ +static int sxgbe_get_tx_owner(struct sxgbe_tx_norm_desc *p) +{ + return p->tdes23.tx_rd_des23.own_bit; +} + +/* Invoked by the xmit function to close the tx descriptor */ +static void sxgbe_close_tx_desc(struct sxgbe_tx_norm_desc *p) +{ + p->tdes23.tx_rd_des23.last_desc = 1; + p->tdes23.tx_rd_des23.int_on_com = 1; +} + +/* Clean the tx descriptor as soon as the tx irq is received */ +static void sxgbe_release_tx_desc(struct sxgbe_tx_norm_desc *p) +{ + memset(p, 0, sizeof(*p)); +} + +/* Clear interrupt on tx frame completion. When this bit is + * set an interrupt happens as soon as the frame is transmitted + */ +static void sxgbe_clear_tx_ic(struct sxgbe_tx_norm_desc *p) +{ + p->tdes23.tx_rd_des23.int_on_com = 0; +} + +/* Last tx segment reports the transmit status */ +static int sxgbe_get_tx_ls(struct sxgbe_tx_norm_desc *p) +{ + return p->tdes23.tx_rd_des23.last_desc; +} + +/* Get the buffer size from the descriptor */ +static int sxgbe_get_tx_len(struct sxgbe_tx_norm_desc *p) +{ + return p->tdes23.tx_rd_des23.buf1_size; +} + +/* Set tx timestamp enable bit */ +static void sxgbe_tx_enable_tstamp(struct sxgbe_tx_norm_desc *p) +{ + p->tdes23.tx_rd_des23.timestmp_enable = 1; +} + +/* get tx timestamp status */ +static int sxgbe_get_tx_timestamp_status(struct sxgbe_tx_norm_desc *p) +{ + return p->tdes23.tx_rd_des23.timestmp_enable; +} + +/* TX Context Descripto Specific */ +static void sxgbe_tx_ctxt_desc_set_ctxt(struct sxgbe_tx_ctxt_desc *p) +{ + p->ctxt_bit = 1; +} + +/* Set the owner of TX context descriptor */ +static void sxgbe_tx_ctxt_desc_set_owner(struct sxgbe_tx_ctxt_desc *p) +{ + p->own_bit = 1; +} + +/* Get the owner of TX context descriptor */ +static int sxgbe_tx_ctxt_desc_get_owner(struct sxgbe_tx_ctxt_desc *p) +{ + return p->own_bit; +} + +/* Set TX mss in TX context Descriptor */ +static void sxgbe_tx_ctxt_desc_set_mss(struct sxgbe_tx_ctxt_desc *p, u16 mss) +{ + p->maxseg_size = mss; +} + +/* Get TX mss from TX context Descriptor */ +static int sxgbe_tx_ctxt_desc_get_mss(struct sxgbe_tx_ctxt_desc *p) +{ + return p->maxseg_size; +} + +/* Set TX tcmssv in TX context Descriptor */ +static void sxgbe_tx_ctxt_desc_set_tcmssv(struct sxgbe_tx_ctxt_desc *p) +{ + p->tcmssv = 1; +} + +/* Reset TX ostc in TX context Descriptor */ +static void sxgbe_tx_ctxt_desc_reset_ostc(struct sxgbe_tx_ctxt_desc *p) +{ + p->ostc = 0; +} + +/* Set IVLAN information */ +static void sxgbe_tx_ctxt_desc_set_ivlantag(struct sxgbe_tx_ctxt_desc *p, + int is_ivlanvalid, int ivlan_tag, + int ivlan_ctl) +{ + if (is_ivlanvalid) { + p->ivlan_tag_valid = is_ivlanvalid; + p->ivlan_tag = ivlan_tag; + p->ivlan_tag_ctl = ivlan_ctl; + } +} + +/* Return IVLAN Tag */ +static int sxgbe_tx_ctxt_desc_get_ivlantag(struct sxgbe_tx_ctxt_desc *p) +{ + return p->ivlan_tag; +} + +/* Set VLAN Tag */ +static void sxgbe_tx_ctxt_desc_set_vlantag(struct sxgbe_tx_ctxt_desc *p, + int is_vlanvalid, int vlan_tag) +{ + if (is_vlanvalid) { + p->vltag_valid = is_vlanvalid; + p->vlan_tag = vlan_tag; + } +} + +/* Return VLAN Tag */ +static int sxgbe_tx_ctxt_desc_get_vlantag(struct sxgbe_tx_ctxt_desc *p) +{ + return p->vlan_tag; +} + +/* Set Time stamp */ +static void sxgbe_tx_ctxt_desc_set_tstamp(struct sxgbe_tx_ctxt_desc *p, + u8 ostc_enable, u64 tstamp) +{ + if (ostc_enable) { + p->ostc = ostc_enable; + p->tstamp_lo = (u32) tstamp; + p->tstamp_hi = (u32) (tstamp>>32); + } +} +/* Close TX context descriptor */ +static void sxgbe_tx_ctxt_desc_close(struct sxgbe_tx_ctxt_desc *p) +{ + p->own_bit = 1; +} + +/* WB status of context descriptor */ +static int sxgbe_tx_ctxt_desc_get_cde(struct sxgbe_tx_ctxt_desc *p) +{ + return p->ctxt_desc_err; +} + +/* DMA RX descriptor ring initialization */ +static void sxgbe_init_rx_desc(struct sxgbe_rx_norm_desc *p, int disable_rx_ic, + int mode, int end) +{ + p->rdes23.rx_rd_des23.own_bit = 1; + if (disable_rx_ic) + p->rdes23.rx_rd_des23.int_on_com = disable_rx_ic; +} + +/* Get RX own bit */ +static int sxgbe_get_rx_owner(struct sxgbe_rx_norm_desc *p) +{ + return p->rdes23.rx_rd_des23.own_bit; +} + +/* Set RX own bit */ +static void sxgbe_set_rx_owner(struct sxgbe_rx_norm_desc *p) +{ + p->rdes23.rx_rd_des23.own_bit = 1; +} + +/* Get the receive frame size */ +static int sxgbe_get_rx_frame_len(struct sxgbe_rx_norm_desc *p) +{ + return p->rdes23.rx_wb_des23.pkt_len; +} + +/* Return first Descriptor status */ +static int sxgbe_get_rx_fd_status(struct sxgbe_rx_norm_desc *p) +{ + return p->rdes23.rx_wb_des23.first_desc; +} + +/* Return Last Descriptor status */ +static int sxgbe_get_rx_ld_status(struct sxgbe_rx_norm_desc *p) +{ + return p->rdes23.rx_wb_des23.last_desc; +} + + +/* Return the RX status looking at the WB fields */ +static int sxgbe_rx_wbstatus(struct sxgbe_rx_norm_desc *p, + struct sxgbe_extra_stats *x, int *checksum) +{ + int status = 0; + + *checksum = CHECKSUM_UNNECESSARY; + if (p->rdes23.rx_wb_des23.err_summary) { + switch (p->rdes23.rx_wb_des23.err_l2_type) { + case RX_GMII_ERR: + status = -EINVAL; + x->rx_code_gmii_err++; + break; + case RX_WATCHDOG_ERR: + status = -EINVAL; + x->rx_watchdog_err++; + break; + case RX_CRC_ERR: + status = -EINVAL; + x->rx_crc_err++; + break; + case RX_GAINT_ERR: + status = -EINVAL; + x->rx_gaint_pkt_err++; + break; + case RX_IP_HDR_ERR: + *checksum = CHECKSUM_NONE; + x->ip_hdr_err++; + break; + case RX_PAYLOAD_ERR: + *checksum = CHECKSUM_NONE; + x->ip_payload_err++; + break; + case RX_OVERFLOW_ERR: + status = -EINVAL; + x->overflow_error++; + break; + default: + pr_err("Invalid Error type\n"); + break; + } + } else { + switch (p->rdes23.rx_wb_des23.err_l2_type) { + case RX_LEN_PKT: + x->len_pkt++; + break; + case RX_MACCTL_PKT: + x->mac_ctl_pkt++; + break; + case RX_DCBCTL_PKT: + x->dcb_ctl_pkt++; + break; + case RX_ARP_PKT: + x->arp_pkt++; + break; + case RX_OAM_PKT: + x->oam_pkt++; + break; + case RX_UNTAG_PKT: + x->untag_okt++; + break; + case RX_OTHER_PKT: + x->other_pkt++; + break; + case RX_SVLAN_PKT: + x->svlan_tag_pkt++; + break; + case RX_CVLAN_PKT: + x->cvlan_tag_pkt++; + break; + case RX_DVLAN_OCVLAN_ICVLAN_PKT: + x->dvlan_ocvlan_icvlan_pkt++; + break; + case RX_DVLAN_OSVLAN_ISVLAN_PKT: + x->dvlan_osvlan_isvlan_pkt++; + break; + case RX_DVLAN_OSVLAN_ICVLAN_PKT: + x->dvlan_osvlan_icvlan_pkt++; + break; + case RX_DVLAN_OCVLAN_ISVLAN_PKT: + x->dvlan_ocvlan_icvlan_pkt++; + break; + default: + pr_err("Invalid L2 Packet type\n"); + break; + } + } + + /* L3/L4 Pkt type */ + switch (p->rdes23.rx_wb_des23.layer34_pkt_type) { + case RX_NOT_IP_PKT: + x->not_ip_pkt++; + break; + case RX_IPV4_TCP_PKT: + x->ip4_tcp_pkt++; + break; + case RX_IPV4_UDP_PKT: + x->ip4_udp_pkt++; + break; + case RX_IPV4_ICMP_PKT: + x->ip4_icmp_pkt++; + break; + case RX_IPV4_UNKNOWN_PKT: + x->ip4_unknown_pkt++; + break; + case RX_IPV6_TCP_PKT: + x->ip6_tcp_pkt++; + break; + case RX_IPV6_UDP_PKT: + x->ip6_udp_pkt++; + break; + case RX_IPV6_ICMP_PKT: + x->ip6_icmp_pkt++; + break; + case RX_IPV6_UNKNOWN_PKT: + x->ip6_unknown_pkt++; + break; + default: + pr_err("Invalid L3/L4 Packet type\n"); + break; + } + + /* Filter */ + if (p->rdes23.rx_wb_des23.vlan_filter_match) + x->vlan_filter_match++; + + if (p->rdes23.rx_wb_des23.sa_filter_fail) { + status = -EINVAL; + x->sa_filter_fail++; + } + if (p->rdes23.rx_wb_des23.da_filter_fail) { + status = -EINVAL; + x->da_filter_fail++; + } + if (p->rdes23.rx_wb_des23.hash_filter_pass) + x->hash_filter_pass++; + + if (p->rdes23.rx_wb_des23.l3_filter_match) + x->l3_filter_match++; + + if (p->rdes23.rx_wb_des23.l4_filter_match) + x->l4_filter_match++; + + return status; +} + +/* Get own bit of context descriptor */ +static int sxgbe_get_rx_ctxt_owner(struct sxgbe_rx_ctxt_desc *p) +{ + return p->own_bit; +} + +/* Set own bit for context descriptor */ +static void sxgbe_set_ctxt_rx_owner(struct sxgbe_rx_ctxt_desc *p) +{ + p->own_bit = 1; +} + + +/* Return the reception status looking at Context control information */ +static void sxgbe_rx_ctxt_wbstatus(struct sxgbe_rx_ctxt_desc *p, + struct sxgbe_extra_stats *x) +{ + if (p->tstamp_dropped) + x->timestamp_dropped++; + + /* ptp */ + if (p->ptp_msgtype == RX_NO_PTP) + x->rx_msg_type_no_ptp++; + else if (p->ptp_msgtype == RX_PTP_SYNC) + x->rx_ptp_type_sync++; + else if (p->ptp_msgtype == RX_PTP_FOLLOW_UP) + x->rx_ptp_type_follow_up++; + else if (p->ptp_msgtype == RX_PTP_DELAY_REQ) + x->rx_ptp_type_delay_req++; + else if (p->ptp_msgtype == RX_PTP_DELAY_RESP) + x->rx_ptp_type_delay_resp++; + else if (p->ptp_msgtype == RX_PTP_PDELAY_REQ) + x->rx_ptp_type_pdelay_req++; + else if (p->ptp_msgtype == RX_PTP_PDELAY_RESP) + x->rx_ptp_type_pdelay_resp++; + else if (p->ptp_msgtype == RX_PTP_PDELAY_FOLLOW_UP) + x->rx_ptp_type_pdelay_follow_up++; + else if (p->ptp_msgtype == RX_PTP_ANNOUNCE) + x->rx_ptp_announce++; + else if (p->ptp_msgtype == RX_PTP_MGMT) + x->rx_ptp_mgmt++; + else if (p->ptp_msgtype == RX_PTP_SIGNAL) + x->rx_ptp_signal++; + else if (p->ptp_msgtype == RX_PTP_RESV_MSG) + x->rx_ptp_resv_msg_type++; +} + +/* Get rx timestamp status */ +static int sxgbe_get_rx_ctxt_tstamp_status(struct sxgbe_rx_ctxt_desc *p) +{ + if ((p->tstamp_hi == 0xffffffff) && (p->tstamp_lo == 0xffffffff)) { + pr_err("Time stamp corrupted\n"); + return 0; + } + + return p->tstamp_available; +} + + +static u64 sxgbe_get_rx_timestamp(struct sxgbe_rx_ctxt_desc *p) +{ + u64 ns; + + ns = p->tstamp_lo; + ns |= ((u64)p->tstamp_hi) << 32; + + return ns; +} + +static const struct sxgbe_desc_ops desc_ops = { + .init_tx_desc = sxgbe_init_tx_desc, + .tx_desc_enable_tse = sxgbe_tx_desc_enable_tse, + .prepare_tx_desc = sxgbe_prepare_tx_desc, + .tx_vlanctl_desc = sxgbe_tx_vlanctl_desc, + .set_tx_owner = sxgbe_set_tx_owner, + .get_tx_owner = sxgbe_get_tx_owner, + .close_tx_desc = sxgbe_close_tx_desc, + .release_tx_desc = sxgbe_release_tx_desc, + .clear_tx_ic = sxgbe_clear_tx_ic, + .get_tx_ls = sxgbe_get_tx_ls, + .get_tx_len = sxgbe_get_tx_len, + .tx_enable_tstamp = sxgbe_tx_enable_tstamp, + .get_tx_timestamp_status = sxgbe_get_tx_timestamp_status, + .tx_ctxt_desc_set_ctxt = sxgbe_tx_ctxt_desc_set_ctxt, + .tx_ctxt_desc_set_owner = sxgbe_tx_ctxt_desc_set_owner, + .get_tx_ctxt_owner = sxgbe_tx_ctxt_desc_get_owner, + .tx_ctxt_desc_set_mss = sxgbe_tx_ctxt_desc_set_mss, + .tx_ctxt_desc_get_mss = sxgbe_tx_ctxt_desc_get_mss, + .tx_ctxt_desc_set_tcmssv = sxgbe_tx_ctxt_desc_set_tcmssv, + .tx_ctxt_desc_reset_ostc = sxgbe_tx_ctxt_desc_reset_ostc, + .tx_ctxt_desc_set_ivlantag = sxgbe_tx_ctxt_desc_set_ivlantag, + .tx_ctxt_desc_get_ivlantag = sxgbe_tx_ctxt_desc_get_ivlantag, + .tx_ctxt_desc_set_vlantag = sxgbe_tx_ctxt_desc_set_vlantag, + .tx_ctxt_desc_get_vlantag = sxgbe_tx_ctxt_desc_get_vlantag, + .tx_ctxt_set_tstamp = sxgbe_tx_ctxt_desc_set_tstamp, + .close_tx_ctxt_desc = sxgbe_tx_ctxt_desc_close, + .get_tx_ctxt_cde = sxgbe_tx_ctxt_desc_get_cde, + .init_rx_desc = sxgbe_init_rx_desc, + .get_rx_owner = sxgbe_get_rx_owner, + .set_rx_owner = sxgbe_set_rx_owner, + .get_rx_frame_len = sxgbe_get_rx_frame_len, + .get_rx_fd_status = sxgbe_get_rx_fd_status, + .get_rx_ld_status = sxgbe_get_rx_ld_status, + .rx_wbstatus = sxgbe_rx_wbstatus, + .get_rx_ctxt_owner = sxgbe_get_rx_ctxt_owner, + .set_rx_ctxt_owner = sxgbe_set_ctxt_rx_owner, + .rx_ctxt_wbstatus = sxgbe_rx_ctxt_wbstatus, + .get_rx_ctxt_tstamp_status = sxgbe_get_rx_ctxt_tstamp_status, + .get_timestamp = sxgbe_get_rx_timestamp, +}; + +const struct sxgbe_desc_ops *sxgbe_get_desc_ops(void) +{ + return &desc_ops; +} diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h new file mode 100644 index 0000000..41844d4 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h @@ -0,0 +1,291 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __SXGBE_DESC_H__ +#define __SXGBE_DESC_H__ + +#define SXGBE_DESC_SIZE_BYTES 16 + +/* forward declaration */ +struct sxgbe_extra_stats; + +/* Transmit checksum insertion control */ +enum tdes_csum_insertion { + cic_disabled = 0, /* Checksum Insertion Control */ + cic_only_ip = 1, /* Only IP header */ + /* IP header but pseudoheader is not calculated */ + cic_no_pseudoheader = 2, + cic_full = 3, /* IP header and pseudoheader */ +}; + +struct sxgbe_tx_norm_desc { + u64 tdes01; /* buf1 address */ + union { + /* TX Read-Format Desc 2,3 */ + struct { + /* TDES2 */ + u32 buf1_size:14; + u32 vlan_tag_ctl:2; + u32 buf2_size:14; + u32 timestmp_enable:1; + u32 int_on_com:1; + /* TDES3 */ + union { + u32 tcp_payload_len:18; + struct { + u32 total_pkt_len:15; + u32 reserved1:1; + u32 cksum_ctl:2; + } cksum_pktlen; + } tx_pkt_len; + + u32 tse_bit:1; + u32 tcp_hdr_len:4; + u32 sa_insert_ctl:3; + u32 crc_pad_ctl:2; + u32 last_desc:1; + u32 first_desc:1; + u32 ctxt_bit:1; + u32 own_bit:1; + } tx_rd_des23; + + /* tx write back Desc 2,3 */ + struct { + /* WB TES2 */ + u32 reserved1; + /* WB TES3 */ + u32 reserved2:31; + u32 own_bit:1; + } tx_wb_des23; + } tdes23; +}; + +struct sxgbe_rx_norm_desc { + union { + u32 rdes0; /* buf1 address */ + struct { + u32 out_vlan_tag:16; + u32 in_vlan_tag:16; + } wb_rx_des0; + } rd_wb_des0; + + union { + u32 rdes1; /* buf2 address or buf1[63:32] */ + u32 rss_hash; /* Write-back RX */ + } rd_wb_des1; + + union { + /* RX Read format Desc 2,3 */ + struct{ + /* RDES2 */ + u32 buf2_addr; + /* RDES3 */ + u32 buf2_hi_addr:30; + u32 int_on_com:1; + u32 own_bit:1; + } rx_rd_des23; + + /* RX write back */ + struct{ + /* WB RDES2 */ + u32 hdr_len:10; + u32 rdes2_reserved:2; + u32 elrd_val:1; + u32 iovt_sel:1; + u32 res_pkt:1; + u32 vlan_filter_match:1; + u32 sa_filter_fail:1; + u32 da_filter_fail:1; + u32 hash_filter_pass:1; + u32 macaddr_filter_match:8; + u32 l3_filter_match:1; + u32 l4_filter_match:1; + u32 l34_filter_num:3; + + /* WB RDES3 */ + u32 pkt_len:14; + u32 rdes3_reserved:1; + u32 err_summary:15; + u32 err_l2_type:4; + u32 layer34_pkt_type:4; + u32 no_coagulation_pkt:1; + u32 in_seq_pkt:1; + u32 rss_valid:1; + u32 context_des_avail:1; + u32 last_desc:1; + u32 first_desc:1; + u32 recv_context_desc:1; + u32 own_bit:1; + } rx_wb_des23; + } rdes23; +}; + +/* Context descriptor structure */ +struct sxgbe_tx_ctxt_desc { + u32 tstamp_lo; + u32 tstamp_hi; + u32 maxseg_size:15; + u32 reserved1:1; + u32 ivlan_tag:16; + u32 vlan_tag:16; + u32 vltag_valid:1; + u32 ivlan_tag_valid:1; + u32 ivlan_tag_ctl:2; + u32 reserved2:3; + u32 ctxt_desc_err:1; + u32 reserved3:2; + u32 ostc:1; + u32 tcmssv:1; + u32 reserved4:2; + u32 ctxt_bit:1; + u32 own_bit:1; +}; + +struct sxgbe_rx_ctxt_desc { + u32 tstamp_lo; + u32 tstamp_hi; + u32 reserved1; + u32 ptp_msgtype:4; + u32 tstamp_available:1; + u32 ptp_rsp_err:1; + u32 tstamp_dropped:1; + u32 reserved2:23; + u32 rx_ctxt_desc:1; + u32 own_bit:1; +}; + +struct sxgbe_desc_ops { + /* DMA TX descriptor ring initialization */ + void (*init_tx_desc)(struct sxgbe_tx_norm_desc *p); + + /* Invoked by the xmit function to prepare the tx descriptor */ + void (*tx_enable_tse)(struct sxgbe_tx_norm_desc *p, u8 is_tse, + u32 hdr_len, u32 payload_len); + + /* Assign buffer lengths for descriptor */ + void (*prepare_tx_desc)(struct sxgbe_tx_norm_desc *p, u8 is_fd, + int buf1_len, int pkt_len, int cksum); + + /* Set VLAN control information */ + void (*tx_vlanctl_desc)(struct sxgbe_tx_norm_desc *p, int vlan_ctl); + + /* Set the owner of the descriptor */ + void (*set_tx_owner)(struct sxgbe_tx_norm_desc *p); + + /* Get the owner of the descriptor */ + int (*get_tx_owner)(struct sxgbe_tx_norm_desc *p); + + /* Invoked by the xmit function to close the tx descriptor */ + void (*close_tx_desc)(struct sxgbe_tx_norm_desc *p); + + /* Clean the tx descriptor as soon as the tx irq is received */ + void (*release_tx_desc)(struct sxgbe_tx_norm_desc *p); + + /* Clear interrupt on tx frame completion. When this bit is + * set an interrupt happens as soon as the frame is transmitted + */ + void (*clear_tx_ic)(struct sxgbe_tx_norm_desc *p); + + /* Last tx segment reports the transmit status */ + int (*get_tx_ls)(struct sxgbe_tx_norm_desc *p); + + /* Get the buffer size from the descriptor */ + int (*get_tx_len)(struct sxgbe_tx_norm_desc *p); + + /* Set tx timestamp enable bit */ + void (*tx_enable_tstamp)(struct sxgbe_tx_norm_desc *p); + + /* get tx timestamp status */ + int (*get_tx_timestamp_status)(struct sxgbe_tx_norm_desc *p); + + /* TX Context Descripto Specific */ + void (*init_tx_ctxt_desc)(struct sxgbe_tx_ctxt_desc *p); + + /* Set the owner of the TX context descriptor */ + void (*set_tx_ctxt_owner)(struct sxgbe_tx_ctxt_desc *p); + + /* Get the owner of the TX context descriptor */ + int (*get_tx_ctxt_owner)(struct sxgbe_tx_ctxt_desc *p); + + /* Set TX mss */ + void (*tx_ctxt_desc_setmss)(struct sxgbe_tx_ctxt_desc *p, int mss); + + /* Set TX mss */ + int (*tx_ctxt_desc_get_mss)(struct sxgbe_tx_ctxt_desc *p); + + /* Set IVLAN information */ + void (*tx_ctxt_desc_set_ivlantag)(struct sxgbe_tx_ctxt_desc *p, + int is_ivlanvalid, int ivlan_tag, + int ivlan_ctl); + + /* Return IVLAN Tag */ + int (*tx_ctxt_desc_get_ivlantag)(struct sxgbe_tx_ctxt_desc *p); + + /* Set VLAN Tag */ + void (*tx_ctxt_desc_set_vlantag)(struct sxgbe_tx_ctxt_desc *p, + int is_vlanvalid, int vlan_tag); + + /* Return VLAN Tag */ + int (*tx_ctxt_desc_get_vlantag)(struct sxgbe_tx_ctxt_desc *p); + + /* Set Time stamp */ + void (*tx_ctxt_set_tstamp)(struct sxgbe_tx_ctxt_desc *p, + u8 ostc_enable, u64 tstamp); + + /* Close TX context descriptor */ + void (*close_tx_ctxt_desc)(struct sxgbe_tx_ctxt_desc *p); + + /* WB status of context descriptor */ + int (*get_tx_ctxt_cde)(struct sxgbe_tx_ctxt_desc *p); + + /* DMA RX descriptor ring initialization */ + void (*init_rx_desc)(struct sxgbe_rx_norm_desc *p, int disable_rx_ic, + int mode, int end); + + /* Get own bit */ + int (*get_rx_owner)(struct sxgbe_rx_norm_desc *p); + + /* Set own bit */ + void (*set_rx_owner)(struct sxgbe_rx_norm_desc *p); + + /* Get the receive frame size */ + int (*get_rx_frame_len)(struct sxgbe_rx_norm_desc *p); + + /* Return first Descriptor status */ + int (*get_rx_fd_status)(struct sxgbe_rx_norm_desc *p); + + /* Return first Descriptor status */ + int (*get_rx_ld_status)(struct sxgbe_rx_norm_desc *p); + + /* Return the reception status looking at the RDES1 */ + void (*rx_wbstatus)(struct sxgbe_rx_norm_desc *p, + struct sxgbe_extra_stats *x); + + /* Get own bit */ + int (*get_rx_ctxt_owner)(struct sxgbe_rx_ctxt_desc *p); + + /* Set own bit */ + void (*set_rx_ctxt_owner)(struct sxgbe_rx_ctxt_desc *p); + + /* Return the reception status looking at Context control information */ + void (*rx_ctxt_wbstatus)(struct sxgbe_rx_ctxt_desc *p, + struct sxgbe_extra_stats *x); + + /* Get rx timestamp status */ + int (*get_rx_ctxt_tstamp_status)(struct sxgbe_rx_ctxt_desc *p); + + /* Get timestamp value for rx, need to check this */ + u64 (*get_timestamp)(struct sxgbe_rx_ctxt_desc *p); +}; + +const struct sxgbe_desc_ops *sxgbe_get_desc_ops(void); + +#endif /* __SXGBE_DESC_H__ */ diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c new file mode 100644 index 0000000..1e68ef3 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c @@ -0,0 +1,377 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/io.h> +#include <linux/netdevice.h> +#include <linux/phy.h> + +#include "sxgbe_common.h" +#include "sxgbe_dma.h" +#include "sxgbe_reg.h" +#include "sxgbe_desc.h" + +/* DMA core initialization */ +static int sxgbe_dma_init(void __iomem *ioaddr, int fix_burst, + int burst_map, int adv_addr_mode) +{ + int retry_count = 10; + u32 reg_val; + + /* reset the DMA */ + writel(SXGBE_DMA_SOFT_RESET, ioaddr + SXGBE_DMA_MODE_REG); + while (retry_count--) { + if (!(readl(ioaddr + SXGBE_DMA_MODE_REG) & + SXGBE_DMA_SOFT_RESET)) + break; + mdelay(10); + } + + if (retry_count < 0) + return -EBUSY; + + reg_val = readl(ioaddr + SXGBE_DMA_SYSBUS_MODE_REG); + + /* if fix_burst = 0, Set UNDEF = 1 of DMA_Sys_Mode Register. + * if fix_burst = 1, Set UNDEF = 0 of DMA_Sys_Mode Register. + * burst_map is bitmap for BLEN[4, 8, 16, 32, 64, 128 and 256]. + * Set burst_map irrespective of fix_burst value. + */ + if (!fix_burst) + reg_val |= SXGBE_DMA_AXI_UNDEF_BURST; + + /* enable adavnced address mode */ + if (adv_addr_mode) + reg_val |= SXGBE_DMA_ENHACE_ADDR_MODE; + + /* write burst len map */ + reg_val |= (burst_map << SXGBE_DMA_BLENMAP_LSHIFT); + + writel(reg_val, ioaddr + SXGBE_DMA_SYSBUS_MODE_REG); + + return 0; +} + +static void sxgbe_dma_channel_init(void __iomem *ioaddr, int cha_num, + int fix_burst, int pbl, dma_addr_t dma_tx, + dma_addr_t dma_rx, int t_rsize, int r_rsize) +{ + u32 reg_val; + dma_addr_t dma_addr; + + reg_val = readl(ioaddr + SXGBE_DMA_CHA_CTL_REG(cha_num)); + /* set the pbl */ + if (fix_burst) { + reg_val |= SXGBE_DMA_PBL_X8MODE; + writel(reg_val, ioaddr + SXGBE_DMA_CHA_CTL_REG(cha_num)); + /* program the TX pbl */ + reg_val = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num)); + reg_val |= (pbl << SXGBE_DMA_TXPBL_LSHIFT); + writel(reg_val, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num)); + /* program the RX pbl */ + reg_val = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num)); + reg_val |= (pbl << SXGBE_DMA_RXPBL_LSHIFT); + writel(reg_val, ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num)); + } + + /* program desc registers */ + writel(dma_tx >> 32, + ioaddr + SXGBE_DMA_CHA_TXDESC_HADD_REG(cha_num)); + writel(dma_tx & 0xFFFFFFFF, + ioaddr + SXGBE_DMA_CHA_TXDESC_LADD_REG(cha_num)); + + writel(dma_rx >> 32, + ioaddr + SXGBE_DMA_CHA_RXDESC_HADD_REG(cha_num)); + writel(dma_rx & 0xFFFFFFFF, + ioaddr + SXGBE_DMA_CHA_RXDESC_LADD_REG(cha_num)); + + /* program tail pointers */ + /* assumption: upper 32 bits are constant and + * same as TX/RX desc list + */ + dma_addr = dma_tx + ((t_rsize - 1) * SXGBE_DESC_SIZE_BYTES); + writel(dma_addr & 0xFFFFFFFF, + ioaddr + SXGBE_DMA_CHA_TXDESC_TAILPTR_REG(cha_num)); + + dma_addr = dma_rx + ((r_rsize - 1) * SXGBE_DESC_SIZE_BYTES); + writel(dma_addr & 0xFFFFFFFF, + ioaddr + SXGBE_DMA_CHA_RXDESC_LADD_REG(cha_num)); + /* program the ring sizes */ + writel(t_rsize - 1, ioaddr + SXGBE_DMA_CHA_TXDESC_RINGLEN_REG(cha_num)); + writel(r_rsize - 1, ioaddr + SXGBE_DMA_CHA_RXDESC_RINGLEN_REG(cha_num)); + + /* Enable TX/RX interrupts */ + writel(SXGBE_DMA_ENA_INT, + ioaddr + SXGBE_DMA_CHA_INT_ENABLE_REG(cha_num)); +} + +static void sxgbe_enable_dma_transmission(void __iomem *ioaddr, int cha_num) +{ + u32 tx_config; + + tx_config = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num)); + tx_config |= SXGBE_TX_START_DMA; + writel(tx_config, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num)); +} + +static void sxgbe_enable_dma_irq(void __iomem *ioaddr, int dma_cnum) +{ + /* Enable TX/RX interrupts */ + writel(SXGBE_DMA_ENA_INT, + ioaddr + SXGBE_DMA_CHA_INT_ENABLE_REG(dma_cnum)); +} + +static void sxgbe_disable_dma_irq(void __iomem *ioaddr, int dma_cnum) +{ + /* Disable TX/RX interrupts */ + writel(0, ioaddr + SXGBE_DMA_CHA_INT_ENABLE_REG(dma_cnum)); +} + +static void sxgbe_dma_start_tx(void __iomem *ioaddr, int tchannels) +{ + int cnum; + u32 tx_ctl_reg; + + for (cnum = 0; cnum < tchannels; cnum++) { + tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum)); + tx_ctl_reg |= SXGBE_TX_ENABLE; + writel(tx_ctl_reg, + ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum)); + } +} + +static void sxgbe_dma_start_tx_queue(void __iomem *ioaddr, int dma_cnum) +{ + u32 tx_ctl_reg; + + tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum)); + tx_ctl_reg |= SXGBE_TX_ENABLE; + writel(tx_ctl_reg, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum)); +} + +static void sxgbe_dma_stop_tx_queue(void __iomem *ioaddr, int dma_cnum) +{ + u32 tx_ctl_reg; + + tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum)); + tx_ctl_reg &= ~(SXGBE_TX_ENABLE); + writel(tx_ctl_reg, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum)); +} + +static void sxgbe_dma_stop_tx(void __iomem *ioaddr, int tchannels) +{ + int cnum; + u32 tx_ctl_reg; + + for (cnum = 0; cnum < tchannels; cnum++) { + tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum)); + tx_ctl_reg &= ~(SXGBE_TX_ENABLE); + writel(tx_ctl_reg, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum)); + } +} + +static void sxgbe_dma_start_rx(void __iomem *ioaddr, int rchannels) +{ + int cnum; + u32 rx_ctl_reg; + + for (cnum = 0; cnum < rchannels; cnum++) { + rx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum)); + rx_ctl_reg |= SXGBE_RX_ENABLE; + writel(rx_ctl_reg, + ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum)); + } +} + +static void sxgbe_dma_stop_rx(void __iomem *ioaddr, int rchannels) +{ + int cnum; + u32 rx_ctl_reg; + + for (cnum = 0; cnum < rchannels; cnum++) { + rx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum)); + rx_ctl_reg &= ~(SXGBE_RX_ENABLE); + writel(rx_ctl_reg, ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum)); + } +} + +static int sxgbe_tx_dma_int_status(void __iomem *ioaddr, int channel_no, + struct sxgbe_extra_stats *x) +{ + u32 int_status = readl(ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no)); + u32 clear_val = 0; + u32 ret_val = 0; + + /* TX Normal Interrupt Summary */ + if (likely(int_status & SXGBE_DMA_INT_STATUS_NIS)) { + x->normal_irq_n++; + if (int_status & SXGBE_DMA_INT_STATUS_TI) { + ret_val |= handle_tx; + x->tx_normal_irq_n++; + clear_val |= SXGBE_DMA_INT_STATUS_TI; + } + + if (int_status & SXGBE_DMA_INT_STATUS_TBU) { + x->tx_underflow_irq++; + ret_val |= tx_bump_tc; + clear_val |= SXGBE_DMA_INT_STATUS_TBU; + } + } else if (unlikely(int_status & SXGBE_DMA_INT_STATUS_AIS)) { + /* TX Abnormal Interrupt Summary */ + if (int_status & SXGBE_DMA_INT_STATUS_TPS) { + ret_val |= tx_hard_error; + clear_val |= SXGBE_DMA_INT_STATUS_TPS; + x->tx_process_stopped_irq++; + } + + if (int_status & SXGBE_DMA_INT_STATUS_FBE) { + ret_val |= tx_hard_error; + x->fatal_bus_error_irq++; + + /* Assumption: FBE bit is the combination of + * all the bus access erros and cleared when + * the respective error bits cleared + */ + + /* check for actual cause */ + if (int_status & SXGBE_DMA_INT_STATUS_TEB0) { + x->tx_read_transfer_err++; + clear_val |= SXGBE_DMA_INT_STATUS_TEB0; + } else { + x->tx_write_transfer_err++; + } + + if (int_status & SXGBE_DMA_INT_STATUS_TEB1) { + x->tx_desc_access_err++; + clear_val |= SXGBE_DMA_INT_STATUS_TEB1; + } else { + x->tx_buffer_access_err++; + } + + if (int_status & SXGBE_DMA_INT_STATUS_TEB2) { + x->tx_data_transfer_err++; + clear_val |= SXGBE_DMA_INT_STATUS_TEB2; + } + } + + /* context descriptor error */ + if (int_status & SXGBE_DMA_INT_STATUS_CTXTERR) { + x->tx_ctxt_desc_err++; + clear_val |= SXGBE_DMA_INT_STATUS_CTXTERR; + } + } + + /* clear the served bits */ + writel(clear_val, ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no)); + + return ret_val; +} + +static int sxgbe_rx_dma_int_status(void __iomem *ioaddr, int channel_no, + struct sxgbe_extra_stats *x) +{ + u32 int_status = readl(ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no)); + u32 clear_val = 0; + u32 ret_val = 0; + + /* RX Normal Interrupt Summary */ + if (likely(int_status & SXGBE_DMA_INT_STATUS_NIS)) { + x->normal_irq_n++; + if (int_status & SXGBE_DMA_INT_STATUS_RI) { + ret_val |= handle_rx; + x->rx_normal_irq_n++; + clear_val |= SXGBE_DMA_INT_STATUS_RI; + } + } else if (unlikely(int_status & SXGBE_DMA_INT_STATUS_AIS)) { + /* RX Abnormal Interrupt Summary */ + if (int_status & SXGBE_DMA_INT_STATUS_RBU) { + ret_val |= rx_bump_tc; + clear_val |= SXGBE_DMA_INT_STATUS_RBU; + x->rx_underflow_irq++; + } + + if (int_status & SXGBE_DMA_INT_STATUS_RPS) { + ret_val |= rx_hard_error; + clear_val |= SXGBE_DMA_INT_STATUS_RPS; + x->rx_process_stopped_irq++; + } + + if (int_status & SXGBE_DMA_INT_STATUS_FBE) { + ret_val |= rx_hard_error; + x->fatal_bus_error_irq++; + + /* Assumption: FBE bit is the combination of + * all the bus access erros and cleared when + * the respective error bits cleared + */ + + /* check for actual cause */ + if (int_status & SXGBE_DMA_INT_STATUS_REB0) { + x->rx_read_transfer_err++; + clear_val |= SXGBE_DMA_INT_STATUS_REB0; + } else { + x->rx_write_transfer_err++; + } + + if (int_status & SXGBE_DMA_INT_STATUS_REB1) { + x->rx_desc_access_err++; + clear_val |= SXGBE_DMA_INT_STATUS_REB1; + } else { + x->rx_buffer_access_err++; + } + + if (int_status & SXGBE_DMA_INT_STATUS_REB2) { + x->rx_data_transfer_err++; + clear_val |= SXGBE_DMA_INT_STATUS_REB2; + } + } + } + + /* clear the served bits */ + writel(clear_val, ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no)); + + return ret_val; +} + +/* Program the HW RX Watchdog */ +static void sxgbe_dma_rx_watchdog(void __iomem *ioaddr, u32 riwt) +{ + u32 que_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, que_num) { + writel(riwt, + ioaddr + SXGBE_DMA_CHA_INT_RXWATCHTMR_REG(que_num)); + } +} + +static const struct sxgbe_dma_ops sxgbe_dma_ops = { + .init = sxgbe_dma_init, + .cha_init = sxgbe_dma_channel_init, + .enable_dma_transmission = sxgbe_enable_dma_transmission, + .enable_dma_irq = sxgbe_enable_dma_irq, + .disable_dma_irq = sxgbe_disable_dma_irq, + .start_tx = sxgbe_dma_start_tx, + .start_tx_queue = sxgbe_dma_start_tx_queue, + .stop_tx = sxgbe_dma_stop_tx, + .stop_tx_queue = sxgbe_dma_stop_tx_queue, + .start_rx = sxgbe_dma_start_rx, + .stop_rx = sxgbe_dma_stop_rx, + .tx_dma_int_status = sxgbe_tx_dma_int_status, + .rx_dma_int_status = sxgbe_rx_dma_int_status, + .rx_watchdog = sxgbe_dma_rx_watchdog, +}; + +const struct sxgbe_dma_ops *sxgbe_get_dma_ops(void) +{ + return &sxgbe_dma_ops; +} diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h new file mode 100644 index 0000000..50c8054 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h @@ -0,0 +1,49 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __SXGBE_DMA_H__ +#define __SXGBE_DMA_H__ + +/* forward declaration */ +struct sxgbe_extra_stats; + +#define SXGBE_DMA_BLENMAP_LSHIFT 1 +#define SXGBE_DMA_TXPBL_LSHIFT 16 +#define SXGBE_DMA_RXPBL_LSHIFT 16 +#define DEFAULT_DMA_PBL 8 + +struct sxgbe_dma_ops { + /* DMA core initialization */ + int (*init)(void __iomem *ioaddr, int fix_burst, + int burst_map, int enhance_amode); + void (*cha_init)(void __iomem *ioaddr, int cha_num, int fix_burst, + int pbl, dma_addr_t dma_tx, dma_addr_t dma_rx, + int t_rzie, int r_rsize); + void (*enable_dma_transmission)(void __iomem *ioaddr, int dma_cnum); + void (*enable_dma_irq)(void __iomem *ioaddr, int dma_cnum); + void (*disable_dma_irq)(void __iomem *ioaddr, int dma_cnum); + void (*start_tx)(void __iomem *ioaddr, int tchannels); + void (*start_tx_queue)(void __iomem *ioaddr, int dma_cnum); + void (*stop_tx)(void __iomem *ioaddr, int tchannels); + void (*stop_tx_queue)(void __iomem *ioaddr, int dma_cnum); + void (*start_rx)(void __iomem *ioaddr, int rchannels); + void (*stop_rx)(void __iomem *ioaddr, int rchannels); + int (*tx_dma_int_status)(void __iomem *ioaddr, int channel_no, + struct sxgbe_extra_stats *x); + int (*rx_dma_int_status)(void __iomem *ioaddr, int channel_no, + struct sxgbe_extra_stats *x); + /* Program the HW RX Watchdog */ + void (*rx_watchdog)(void __iomem *ioaddr, u32 riwt); +}; + +const struct sxgbe_dma_ops *sxgbe_get_dma_ops(void); + +#endif /* __SXGBE_CORE_H__ */ diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c new file mode 100644 index 0000000..1dce2b2 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c @@ -0,0 +1,44 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/phy.h> + +#include "sxgbe_common.h" + +struct sxgbe_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define SXGBE_STAT(m) \ +{ \ + #m, \ + FIELD_SIZEOF(struct sxgbe_extra_stats, m), \ + offsetof(struct sxgbe_priv_data, xstats.m) \ +} + +static const struct sxgbe_stats sxgbe_gstrings_stats[] = { +}; +#define SXGBE_STATS_LEN ARRAY_SIZE(sxgbe_gstrings_stats) + +static const struct ethtool_ops sxgbe_ethtool_ops = { +}; + +void sxgbe_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &sxgbe_ethtool_ops); +} diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c new file mode 100644 index 0000000..1714fd7 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -0,0 +1,2059 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/crc32.h> +#include <linux/dma-mapping.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/if.h> +#include <linux/if_ether.h> +#include <linux/if_vlan.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ip.h> +#include <linux/kernel.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/net_tstamp.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/prefetch.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/tcp.h> +#include <linux/sxgbe_platform.h> + +#include "sxgbe_common.h" +#include "sxgbe_desc.h" +#include "sxgbe_dma.h" +#include "sxgbe_mtl.h" +#include "sxgbe_reg.h" + +#define SXGBE_ALIGN(x) L1_CACHE_ALIGN(x) +#define JUMBO_LEN 9000 + +/* Module parameters */ +#define TX_TIMEO 5000 +#define DMA_TX_SIZE 512 +#define DMA_RX_SIZE 1024 +#define TC_DEFAULT 64 +#define DMA_BUFFER_SIZE BUF_SIZE_2KiB +/* The default timer value as per the sxgbe specification 1 sec(1000 ms) */ +#define SXGBE_DEFAULT_LPI_TIMER 1000 + +static int debug = -1; + +module_param(debug, int, S_IRUGO | S_IWUSR); +static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_IFUP | + NETIF_MSG_IFDOWN | NETIF_MSG_TIMER); + +static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id); +static irqreturn_t sxgbe_tx_interrupt(int irq, void *dev_id); +static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id); + +#define SXGBE_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x)) + +/** + * sxgbe_clk_csr_set - dynamically set the MDC clock + * @priv: driver private structure + * Description: this is to dynamically set the MDC clock according to the csr + * clock input. + */ +static void sxgbe_clk_csr_set(struct sxgbe_priv_data *priv) +{ + u32 clk_rate = clk_get_rate(priv->sxgbe_clk); + + /* assign the proper divider, this will be used during + * mdio communication + */ + if (clk_rate < SXGBE_CSR_F_150M) + priv->clk_csr = SXGBE_CSR_100_150M; + else if (clk_rate <= SXGBE_CSR_F_250M) + priv->clk_csr = SXGBE_CSR_150_250M; + else if (clk_rate <= SXGBE_CSR_F_300M) + priv->clk_csr = SXGBE_CSR_250_300M; + else if (clk_rate <= SXGBE_CSR_F_350M) + priv->clk_csr = SXGBE_CSR_300_350M; + else if (clk_rate <= SXGBE_CSR_F_400M) + priv->clk_csr = SXGBE_CSR_350_400M; + else if (clk_rate <= SXGBE_CSR_F_500M) + priv->clk_csr = SXGBE_CSR_400_500M; +} + +/* minimum number of free TX descriptors required to wake up TX process */ +#define SXGBE_TX_THRESH(x) (x->dma_tx_size/4) + +static inline u32 sxgbe_tx_avail(struct sxgbe_tx_queue *queue, int tx_qsize) +{ + return queue->dirty_tx + tx_qsize - queue->cur_tx - 1; +} + +/** + * sxgbe_adjust_link + * @dev: net device structure + * Description: it adjusts the link parameters. + */ +static void sxgbe_adjust_link(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + u8 new_state = 0; + u8 speed = 0xff; + + if (!phydev) + return; + + /* SXGBE is not supporting auto-negotiation and + * half duplex mode. so, not handling duplex change + * in this function. only handling speed and link status + */ + if (phydev->link) { + if (phydev->speed != priv->speed) { + new_state = 1; + switch (phydev->speed) { + case SPEED_10000: + speed = SXGBE_SPEED_10G; + break; + case SPEED_2500: + speed = SXGBE_SPEED_2_5G; + break; + case SPEED_1000: + speed = SXGBE_SPEED_1G; + break; + default: + netif_err(priv, link, dev, + "Speed (%d) not supported\n", + phydev->speed); + } + + priv->speed = phydev->speed; + priv->hw->mac->set_speed(priv->ioaddr, speed); + } + + if (!priv->oldlink) { + new_state = 1; + priv->oldlink = 1; + } + } else if (priv->oldlink) { + new_state = 1; + priv->oldlink = 0; + priv->speed = SPEED_UNKNOWN; + } + + if (new_state & netif_msg_link(priv)) + phy_print_status(phydev); +} + +/** + * sxgbe_init_phy - PHY initialization + * @dev: net device structure + * Description: it initializes the driver's PHY state, and attaches the PHY + * to the mac driver. + * Return value: + * 0 on success + */ +static int sxgbe_init_phy(struct net_device *ndev) +{ + char phy_id_fmt[MII_BUS_ID_SIZE + 3]; + char bus_id[MII_BUS_ID_SIZE]; + struct phy_device *phydev; + struct sxgbe_priv_data *priv = netdev_priv(ndev); + int phy_iface = priv->plat->interface; + + /* assign default link status */ + priv->oldlink = 0; + priv->speed = SPEED_UNKNOWN; + priv->oldduplex = DUPLEX_UNKNOWN; + + if (priv->plat->phy_bus_name) + snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x", + priv->plat->phy_bus_name, priv->plat->bus_id); + else + snprintf(bus_id, MII_BUS_ID_SIZE, "sxgbe-%x", + priv->plat->bus_id); + + snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, + priv->plat->phy_addr); + netdev_dbg(ndev, "%s: trying to attach to %s\n", __func__, phy_id_fmt); + + phydev = phy_connect(ndev, phy_id_fmt, &sxgbe_adjust_link, phy_iface); + + if (IS_ERR(phydev)) { + netdev_err(ndev, "Could not attach to PHY\n"); + return PTR_ERR(phydev); + } + + /* Stop Advertising 1000BASE Capability if interface is not GMII */ + if ((phy_iface == PHY_INTERFACE_MODE_MII) || + (phy_iface == PHY_INTERFACE_MODE_RMII)) + phydev->advertising &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + if (phydev->phy_id == 0) { + phy_disconnect(phydev); + return -ENODEV; + } + + netdev_dbg(ndev, "%s: attached to PHY (UID 0x%x) Link = %d\n", + __func__, phydev->phy_id, phydev->link); + + /* save phy device in private structure */ + priv->phydev = phydev; + + return 0; +} + +/** + * sxgbe_clear_descriptors: clear descriptors + * @priv: driver private structure + * Description: this function is called to clear the tx and rx descriptors + * in case of both basic and extended descriptors are used. + */ +static void sxgbe_clear_descriptors(struct sxgbe_priv_data *priv) +{ + int i, j; + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; + + /* Clear the Rx/Tx descriptors */ + for (j = 0; j < SXGBE_RX_QUEUES; j++) { + for (i = 0; i < rxsize; i++) + priv->hw->desc->init_rx_desc(&priv->rxq[j]->dma_rx[i], + priv->use_riwt, priv->mode, + (i == rxsize - 1)); + } + + for (j = 0; j < SXGBE_TX_QUEUES; j++) { + for (i = 0; i < txsize; i++) + priv->hw->desc->init_tx_desc(&priv->txq[j]->dma_tx[i]); + } +} + +static int sxgbe_init_rx_buffers(struct net_device *dev, + struct sxgbe_rx_norm_desc *p, int i, + unsigned int dma_buf_sz, + struct sxgbe_rx_queue *rx_ring) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + struct sk_buff *skb; + + skb = __netdev_alloc_skb(dev, dma_buf_sz, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + skb_reserve(skb, NET_IP_ALIGN); + + rx_ring->rx_skbuff[i] = skb; + rx_ring->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data, + dma_buf_sz, DMA_FROM_DEVICE); + + if (dma_mapping_error(priv->device, rx_ring->rx_skbuff_dma[i])) { + netdev_err(dev, "%s: DMA mapping error\n", __func__); + dev_kfree_skb_any(skb); + return -EINVAL; + } + + p->rdes23.rx_rd_des23.buf2_addr = rx_ring->rx_skbuff_dma[i]; + + return 0; +} +/** + * init_tx_ring - init the TX descriptor ring + * @dev: net device structure + * @tx_ring: ring to be intialised + * @tx_rsize: ring size + * Description: this function initializes the DMA TX descriptor + */ +static int init_tx_ring(struct device *dev, u8 queue_no, + struct sxgbe_tx_queue *tx_ring, int tx_rsize) +{ + /* TX ring is not allcoated */ + if (!tx_ring) { + dev_err(dev, "No memory for TX queue of SXGBE\n"); + return -ENOMEM; + } + + /* allocate memory for TX descriptors */ + tx_ring->dma_tx = dma_zalloc_coherent(dev, + tx_rsize * sizeof(struct sxgbe_tx_norm_desc), + &tx_ring->dma_tx_phy, GFP_KERNEL); + if (!tx_ring->dma_tx) + return -ENOMEM; + + /* allocate memory for TX skbuff array */ + tx_ring->tx_skbuff_dma = devm_kcalloc(dev, tx_rsize, + sizeof(dma_addr_t), GFP_KERNEL); + if (!tx_ring->tx_skbuff_dma) + goto dmamem_err; + + tx_ring->tx_skbuff = devm_kcalloc(dev, tx_rsize, + sizeof(struct sk_buff *), GFP_KERNEL); + + if (!tx_ring->tx_skbuff) + goto dmamem_err; + + /* assign queue number */ + tx_ring->queue_no = queue_no; + + /* initalise counters */ + tx_ring->dirty_tx = 0; + tx_ring->cur_tx = 0; + + /* initalise TX queue lock */ + spin_lock_init(&tx_ring->tx_lock); + + return 0; + +dmamem_err: + dma_free_coherent(dev, tx_rsize * sizeof(struct sxgbe_tx_norm_desc), + tx_ring->dma_tx, tx_ring->dma_tx_phy); + return -ENOMEM; +} + +/** + * free_rx_ring - free the RX descriptor ring + * @dev: net device structure + * @rx_ring: ring to be intialised + * @rx_rsize: ring size + * Description: this function initializes the DMA RX descriptor + */ +void free_rx_ring(struct device *dev, struct sxgbe_rx_queue *rx_ring, + int rx_rsize) +{ + dma_free_coherent(dev, rx_rsize * sizeof(struct sxgbe_rx_norm_desc), + rx_ring->dma_rx, rx_ring->dma_rx_phy); + kfree(rx_ring->rx_skbuff_dma); + kfree(rx_ring->rx_skbuff); +} + +/** + * init_rx_ring - init the RX descriptor ring + * @dev: net device structure + * @rx_ring: ring to be intialised + * @rx_rsize: ring size + * Description: this function initializes the DMA RX descriptor + */ +static int init_rx_ring(struct net_device *dev, u8 queue_no, + struct sxgbe_rx_queue *rx_ring, int rx_rsize) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + int desc_index; + unsigned int bfsize = 0; + unsigned int ret = 0; + + /* Set the max buffer size according to the MTU. */ + bfsize = ALIGN(dev->mtu + ETH_HLEN + ETH_FCS_LEN + NET_IP_ALIGN, 8); + + netif_dbg(priv, probe, dev, "%s: bfsize %d\n", __func__, bfsize); + + /* RX ring is not allcoated */ + if (rx_ring == NULL) { + netdev_err(dev, "No memory for RX queue\n"); + goto error; + } + + /* assign queue number */ + rx_ring->queue_no = queue_no; + + /* allocate memory for RX descriptors */ + rx_ring->dma_rx = dma_zalloc_coherent(priv->device, + rx_rsize * sizeof(struct sxgbe_rx_norm_desc), + &rx_ring->dma_rx_phy, GFP_KERNEL); + + if (rx_ring->dma_rx == NULL) + goto error; + + /* allocate memory for RX skbuff array */ + rx_ring->rx_skbuff_dma = kmalloc_array(rx_rsize, + sizeof(dma_addr_t), GFP_KERNEL); + if (rx_ring->rx_skbuff_dma == NULL) + goto dmamem_err; + + rx_ring->rx_skbuff = kmalloc_array(rx_rsize, + sizeof(struct sk_buff *), GFP_KERNEL); + if (rx_ring->rx_skbuff == NULL) + goto rxbuff_err; + + /* initialise the buffers */ + for (desc_index = 0; desc_index < rx_rsize; desc_index++) { + struct sxgbe_rx_norm_desc *p; + p = rx_ring->dma_rx + desc_index; + ret = sxgbe_init_rx_buffers(dev, p, desc_index, + bfsize, rx_ring); + if (ret) + goto err_init_rx_buffers; + } + + /* initalise counters */ + rx_ring->cur_rx = 0; + rx_ring->dirty_rx = (unsigned int)(desc_index - rx_rsize); + priv->dma_buf_sz = bfsize; + + return 0; + +err_init_rx_buffers: + while (--desc_index >= 0) + free_rx_ring(priv->device, rx_ring, desc_index); + kfree(rx_ring->rx_skbuff); +rxbuff_err: + kfree(rx_ring->rx_skbuff_dma); +dmamem_err: + dma_free_coherent(priv->device, + rx_rsize * sizeof(struct sxgbe_rx_norm_desc), + rx_ring->dma_rx, rx_ring->dma_rx_phy); +error: + return -ENOMEM; +} +/** + * free_tx_ring - free the TX descriptor ring + * @dev: net device structure + * @tx_ring: ring to be intialised + * @tx_rsize: ring size + * Description: this function initializes the DMA TX descriptor + */ +void free_tx_ring(struct device *dev, struct sxgbe_tx_queue *tx_ring, + int tx_rsize) +{ + dma_free_coherent(dev, tx_rsize * sizeof(struct sxgbe_tx_norm_desc), + tx_ring->dma_tx, tx_ring->dma_tx_phy); +} + +/** + * init_dma_desc_rings - init the RX/TX descriptor rings + * @dev: net device structure + * Description: this function initializes the DMA RX/TX descriptors + * and allocates the socket buffers. It suppors the chained and ring + * modes. + */ +static int init_dma_desc_rings(struct net_device *netd) +{ + int queue_num, ret; + struct sxgbe_priv_data *priv = netdev_priv(netd); + int tx_rsize = priv->dma_tx_size; + int rx_rsize = priv->dma_rx_size; + + /* Allocate memory for queue structures and TX descs */ + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + ret = init_tx_ring(priv->device, queue_num, + priv->txq[queue_num], tx_rsize); + if (ret) { + dev_err(&netd->dev, "TX DMA ring allocation failed!\n"); + goto txalloc_err; + } + + /* save private pointer in each ring this + * pointer is needed during cleaing TX queue + */ + priv->txq[queue_num]->priv_ptr = priv; + } + + /* Allocate memory for queue structures and RX descs */ + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) { + ret = init_rx_ring(netd, queue_num, + priv->rxq[queue_num], rx_rsize); + if (ret) { + netdev_err(netd, "RX DMA ring allocation failed!!\n"); + goto rxalloc_err; + } + + /* save private pointer in each ring this + * pointer is needed during cleaing TX queue + */ + priv->rxq[queue_num]->priv_ptr = priv; + } + + sxgbe_clear_descriptors(priv); + + return 0; + +txalloc_err: + while (queue_num--) + free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize); + return ret; + +rxalloc_err: + while (queue_num--) + free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize); + return ret; +} + +static void tx_free_ring_skbufs(struct sxgbe_tx_queue *txqueue) +{ + int dma_desc; + struct sxgbe_priv_data *priv = txqueue->priv_ptr; + int tx_rsize = priv->dma_tx_size; + + for (dma_desc = 0; dma_desc < tx_rsize; dma_desc++) { + struct sxgbe_tx_norm_desc *tdesc = txqueue->dma_tx + dma_desc; + + if (txqueue->tx_skbuff_dma[dma_desc]) + dma_unmap_single(priv->device, + txqueue->tx_skbuff_dma[dma_desc], + priv->hw->desc->get_tx_len(tdesc), + DMA_TO_DEVICE); + + dev_kfree_skb_any(txqueue->tx_skbuff[dma_desc]); + txqueue->tx_skbuff[dma_desc] = NULL; + txqueue->tx_skbuff_dma[dma_desc] = 0; + } +} + + +static void dma_free_tx_skbufs(struct sxgbe_priv_data *priv) +{ + int queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + struct sxgbe_tx_queue *tqueue = priv->txq[queue_num]; + tx_free_ring_skbufs(tqueue); + } +} + +static void free_dma_desc_resources(struct sxgbe_priv_data *priv) +{ + int queue_num; + int tx_rsize = priv->dma_tx_size; + int rx_rsize = priv->dma_rx_size; + + /* Release the DMA TX buffers */ + dma_free_tx_skbufs(priv); + + /* Release the TX ring memory also */ + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize); + } + + /* Release the RX ring memory also */ + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) { + free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize); + } +} + +static int txring_mem_alloc(struct sxgbe_priv_data *priv) +{ + int queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + priv->txq[queue_num] = devm_kmalloc(priv->device, + sizeof(struct sxgbe_tx_queue), GFP_KERNEL); + if (!priv->txq[queue_num]) + return -ENOMEM; + } + + return 0; +} + +static int rxring_mem_alloc(struct sxgbe_priv_data *priv) +{ + int queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) { + priv->rxq[queue_num] = devm_kmalloc(priv->device, + sizeof(struct sxgbe_rx_queue), GFP_KERNEL); + if (!priv->rxq[queue_num]) + return -ENOMEM; + } + + return 0; +} + +/** + * sxgbe_mtl_operation_mode - HW MTL operation mode + * @priv: driver private structure + * Description: it sets the MTL operation mode: tx/rx MTL thresholds + * or Store-And-Forward capability. + */ +static void sxgbe_mtl_operation_mode(struct sxgbe_priv_data *priv) +{ + int queue_num; + + /* TX/RX threshold control */ + if (likely(priv->plat->force_sf_dma_mode)) { + /* set TC mode for TX QUEUES */ + SXGBE_FOR_EACH_QUEUE(priv->hw_cap.tx_mtl_queues, queue_num) + priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, queue_num, + SXGBE_MTL_SFMODE); + priv->tx_tc = SXGBE_MTL_SFMODE; + + /* set TC mode for RX QUEUES */ + SXGBE_FOR_EACH_QUEUE(priv->hw_cap.rx_mtl_queues, queue_num) + priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, queue_num, + SXGBE_MTL_SFMODE); + priv->rx_tc = SXGBE_MTL_SFMODE; + } else if (unlikely(priv->plat->force_thresh_dma_mode)) { + /* set TC mode for TX QUEUES */ + SXGBE_FOR_EACH_QUEUE(priv->hw_cap.tx_mtl_queues, queue_num) + priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, queue_num, + priv->tx_tc); + /* set TC mode for RX QUEUES */ + SXGBE_FOR_EACH_QUEUE(priv->hw_cap.rx_mtl_queues, queue_num) + priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, queue_num, + priv->rx_tc); + } else { + pr_err("ERROR: %s: Invalid TX threshold mode\n", __func__); + } +} + +/** + * sxgbe_tx_queue_clean: + * @priv: driver private structure + * Description: it reclaims resources after transmission completes. + */ +static void sxgbe_tx_queue_clean(struct sxgbe_tx_queue *tqueue) +{ + struct sxgbe_priv_data *priv = tqueue->priv_ptr; + unsigned int tx_rsize = priv->dma_tx_size; + struct netdev_queue *dev_txq; + u8 queue_no = tqueue->queue_no; + + dev_txq = netdev_get_tx_queue(priv->dev, queue_no); + + spin_lock(&tqueue->tx_lock); + + priv->xstats.tx_clean++; + while (tqueue->dirty_tx != tqueue->cur_tx) { + unsigned int entry = tqueue->dirty_tx % tx_rsize; + struct sk_buff *skb = tqueue->tx_skbuff[entry]; + struct sxgbe_tx_norm_desc *p; + + p = tqueue->dma_tx + entry; + + /* Check if the descriptor is owned by the DMA. */ + if (priv->hw->desc->get_tx_owner(p)) + break; + + if (netif_msg_tx_done(priv)) + pr_debug("%s: curr %d, dirty %d\n", + __func__, tqueue->cur_tx, tqueue->dirty_tx); + + if (likely(tqueue->tx_skbuff_dma[entry])) { + dma_unmap_single(priv->device, + tqueue->tx_skbuff_dma[entry], + priv->hw->desc->get_tx_len(p), + DMA_TO_DEVICE); + tqueue->tx_skbuff_dma[entry] = 0; + } + + if (likely(skb)) { + dev_kfree_skb(skb); + tqueue->tx_skbuff[entry] = NULL; + } + + priv->hw->desc->release_tx_desc(p); + + tqueue->dirty_tx++; + } + + /* wake up queue */ + if (unlikely(netif_tx_queue_stopped(dev_txq) && + sxgbe_tx_avail(tqueue, tx_rsize) > SXGBE_TX_THRESH(priv))) { + netif_tx_lock(priv->dev); + if (netif_tx_queue_stopped(dev_txq) && + sxgbe_tx_avail(tqueue, tx_rsize) > SXGBE_TX_THRESH(priv)) { + if (netif_msg_tx_done(priv)) + pr_debug("%s: restart transmit\n", __func__); + netif_tx_wake_queue(dev_txq); + } + netif_tx_unlock(priv->dev); + } + + spin_unlock(&tqueue->tx_lock); +} + +/** + * sxgbe_tx_clean: + * @priv: driver private structure + * Description: it reclaims resources after transmission completes. + */ +static void sxgbe_tx_all_clean(struct sxgbe_priv_data *priv) +{ + u8 queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + struct sxgbe_tx_queue *tqueue = priv->txq[queue_num]; + sxgbe_tx_queue_clean(tqueue); + } +} + +/** + * sxgbe_restart_tx_queue: irq tx error mng function + * @priv: driver private structure + * Description: it cleans the descriptors and restarts the transmission + * in case of errors. + */ +static void sxgbe_restart_tx_queue(struct sxgbe_priv_data *priv, int queue_num) +{ + struct sxgbe_tx_queue *tx_ring = priv->txq[queue_num]; + struct netdev_queue *dev_txq = netdev_get_tx_queue(priv->dev, + queue_num); + + /* stop the queue */ + netif_tx_stop_queue(dev_txq); + + /* stop the tx dma */ + priv->hw->dma->stop_tx_queue(priv->ioaddr, queue_num); + + /* free the skbuffs of the ring */ + tx_free_ring_skbufs(tx_ring); + + /* initalise counters */ + tx_ring->cur_tx = 0; + tx_ring->dirty_tx = 0; + + /* start the tx dma */ + priv->hw->dma->start_tx_queue(priv->ioaddr, queue_num); + + priv->dev->stats.tx_errors++; + + /* wakeup the queue */ + netif_tx_wake_queue(dev_txq); +} + +/** + * sxgbe_reset_all_tx_queues: irq tx error mng function + * @priv: driver private structure + * Description: it cleans all the descriptors and + * restarts the transmission on all queues in case of errors. + */ +static void sxgbe_reset_all_tx_queues(struct sxgbe_priv_data *priv) +{ + int queue_num; + + /* On TX timeout of net device, resetting of all queues + * may not be proper way, revisit this later if needed + */ + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) + sxgbe_restart_tx_queue(priv, queue_num); +} + +/** + * sxgbe_get_hw_features: get XMAC capabilities from the HW cap. register. + * @priv: driver private structure + * Description: + * new GMAC chip generations have a new register to indicate the + * presence of the optional feature/functions. + * This can be also used to override the value passed through the + * platform and necessary for old MAC10/100 and GMAC chips. + */ +static int sxgbe_get_hw_features(struct sxgbe_priv_data * const priv) +{ + int rval = 0; + struct sxgbe_hw_features *features = &priv->hw_cap; + + /* Read First Capability Register CAP[0] */ + rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 0); + if (rval) { + features->pmt_remote_wake_up = + SXGBE_HW_FEAT_PMT_TEMOTE_WOP(rval); + features->pmt_magic_frame = SXGBE_HW_FEAT_PMT_MAGIC_PKT(rval); + features->atime_stamp = SXGBE_HW_FEAT_IEEE1500_2008(rval); + features->tx_csum_offload = + SXGBE_HW_FEAT_TX_CSUM_OFFLOAD(rval); + features->rx_csum_offload = + SXGBE_HW_FEAT_RX_CSUM_OFFLOAD(rval); + features->multi_macaddr = SXGBE_HW_FEAT_MACADDR_COUNT(rval); + features->tstamp_srcselect = SXGBE_HW_FEAT_TSTMAP_SRC(rval); + features->sa_vlan_insert = SXGBE_HW_FEAT_SRCADDR_VLAN(rval); + } + /* Read First Capability Register CAP[1] */ + rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 1); + if (rval) { + features->rxfifo_size = SXGBE_HW_FEAT_RX_FIFO_SIZE(rval); + features->txfifo_size = SXGBE_HW_FEAT_TX_FIFO_SIZE(rval); + features->atstmap_hword = SXGBE_HW_FEAT_TX_FIFO_SIZE(rval); + features->dcb_enable = SXGBE_HW_FEAT_DCB(rval); + features->splithead_enable = SXGBE_HW_FEAT_SPLIT_HDR(rval); + features->tcpseg_offload = SXGBE_HW_FEAT_TSO(rval); + features->debug_mem = SXGBE_HW_FEAT_DEBUG_MEM_IFACE(rval); + features->rss_enable = SXGBE_HW_FEAT_RSS(rval); + features->hash_tsize = SXGBE_HW_FEAT_HASH_TABLE_SIZE(rval); + features->l3l4_filer_size = SXGBE_HW_FEAT_L3L4_FILTER_NUM(rval); + } + + /* Read First Capability Register CAP[2] */ + rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 2); + if (rval) { + features->rx_mtl_queues = SXGBE_HW_FEAT_RX_MTL_QUEUES(rval); + features->tx_mtl_queues = SXGBE_HW_FEAT_TX_MTL_QUEUES(rval); + features->rx_dma_channels = SXGBE_HW_FEAT_RX_DMA_CHANNELS(rval); + features->tx_dma_channels = SXGBE_HW_FEAT_TX_DMA_CHANNELS(rval); + features->pps_output_count = SXGBE_HW_FEAT_PPS_OUTPUTS(rval); + features->aux_input_count = SXGBE_HW_FEAT_AUX_SNAPSHOTS(rval); + } + + return rval; +} + +/** + * sxgbe_check_ether_addr: check if the MAC addr is valid + * @priv: driver private structure + * Description: + * it is to verify if the MAC address is valid, in case of failures it + * generates a random MAC address + */ +static void sxgbe_check_ether_addr(struct sxgbe_priv_data *priv) +{ + if (!is_valid_ether_addr(priv->dev->dev_addr)) { + priv->hw->mac->get_umac_addr((void __iomem *) + priv->ioaddr, + priv->dev->dev_addr, 0); + if (!is_valid_ether_addr(priv->dev->dev_addr)) + eth_hw_addr_random(priv->dev); + } + dev_info(priv->device, "device MAC address %pM\n", + priv->dev->dev_addr); +} + +/** + * sxgbe_init_dma_engine: DMA init. + * @priv: driver private structure + * Description: + * It inits the DMA invoking the specific SXGBE callback. + * Some DMA parameters can be passed from the platform; + * in case of these are not passed a default is kept for the MAC or GMAC. + */ +static int sxgbe_init_dma_engine(struct sxgbe_priv_data *priv) +{ + int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_map = 0; + int adv_addr_mode = 1; + int queue_num; + + if (priv->plat->dma_cfg) { + pbl = priv->plat->dma_cfg->pbl; + fixed_burst = priv->plat->dma_cfg->fixed_burst; + burst_map = priv->plat->dma_cfg->burst_map; + adv_addr_mode = priv->plat->dma_cfg->adv_addr_mode; + } + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) + priv->hw->dma->cha_init(priv->ioaddr, queue_num, + fixed_burst, pbl, + (priv->txq[queue_num])->dma_tx_phy, + (priv->rxq[queue_num])->dma_rx_phy, + priv->dma_tx_size, priv->dma_rx_size); + + return priv->hw->dma->init(priv->ioaddr, fixed_burst, + burst_map, adv_addr_mode); +} + +/** + * sxgbe_init_mtl_engine: MTL init. + * @priv: driver private structure + * Description: + * It inits the MTL invoking the specific SXGBE callback. + */ +static void sxgbe_init_mtl_engine(struct sxgbe_priv_data *priv) +{ + int queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + priv->hw->mtl->mtl_set_txfifosize(priv->ioaddr, queue_num, + priv->hw_cap.tx_mtl_qsize); + priv->hw->mtl->mtl_enable_txqueue(priv->ioaddr, queue_num); + } +} + +/** + * sxgbe_disable_mtl_engine: MTL disable. + * @priv: driver private structure + * Description: + * It disables the MTL queues by invoking the specific SXGBE callback. + */ +static void sxgbe_disable_mtl_engine(struct sxgbe_priv_data *priv) +{ + int queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) + priv->hw->mtl->mtl_disable_txqueue(priv->ioaddr, queue_num); +} + + +/** + * sxgbe_tx_timer: mitigation sw timer for tx. + * @data: data pointer + * Description: + * This is the timer handler to directly invoke the sxgbe_tx_clean. + */ +static void sxgbe_tx_timer(unsigned long data) +{ + struct sxgbe_tx_queue *p = (struct sxgbe_tx_queue *)data; + sxgbe_tx_queue_clean(p); +} + +/** + * sxgbe_init_tx_coalesce: init tx mitigation options. + * @priv: driver private structure + * Description: + * This inits the transmit coalesce parameters: i.e. timer rate, + * timer handler and default threshold used for enabling the + * interrupt on completion bit. + */ +static void sxgbe_tx_init_coalesce(struct sxgbe_priv_data *priv) +{ + u8 queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + struct sxgbe_tx_queue *p = priv->txq[queue_num]; + p->tx_coal_frames = SXGBE_TX_FRAMES; + p->tx_coal_timer = SXGBE_COAL_TX_TIMER; + init_timer(&p->txtimer); + p->txtimer.expires = SXGBE_COAL_TIMER(p->tx_coal_timer); + p->txtimer.data = (unsigned long)&priv->txq[queue_num]; + p->txtimer.function = sxgbe_tx_timer; + add_timer(&p->txtimer); + } +} + +static void sxgbe_tx_del_timer(struct sxgbe_priv_data *priv) +{ + u8 queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + struct sxgbe_tx_queue *p = priv->txq[queue_num]; + del_timer_sync(&p->txtimer); + } +} + +/** + * sxgbe_open - open entry point of the driver + * @dev : pointer to the device structure. + * Description: + * This function is the open entry point of the driver. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int sxgbe_open(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + int ret, queue_num; + + clk_prepare_enable(priv->sxgbe_clk); + + sxgbe_check_ether_addr(priv); + + /* Init the phy */ + ret = sxgbe_init_phy(dev); + if (ret) { + netdev_err(dev, "%s: Cannot attach to PHY (error: %d)\n", + __func__, ret); + goto phy_error; + } + + /* Create and initialize the TX/RX descriptors chains. */ + priv->dma_tx_size = SXGBE_ALIGN(DMA_TX_SIZE); + priv->dma_rx_size = SXGBE_ALIGN(DMA_RX_SIZE); + priv->dma_buf_sz = SXGBE_ALIGN(DMA_BUFFER_SIZE); + priv->tx_tc = TC_DEFAULT; + priv->rx_tc = TC_DEFAULT; + init_dma_desc_rings(dev); + + /* DMA initialization and SW reset */ + ret = sxgbe_init_dma_engine(priv); + if (ret < 0) { + netdev_err(dev, "%s: DMA initialization failed\n", __func__); + goto init_error; + } + + /* MTL initialization */ + sxgbe_init_mtl_engine(priv); + + /* Copy the MAC addr into the HW */ + priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0); + + /* Initialize the MAC Core */ + priv->hw->mac->core_init(priv->ioaddr); + + /* Request the IRQ lines */ + ret = devm_request_irq(priv->device, priv->irq, sxgbe_common_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + netdev_err(dev, "%s: ERROR: allocating the IRQ %d (error: %d)\n", + __func__, priv->irq, ret); + goto init_error; + } + + /* Request TX DMA irq lines */ + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + ret = devm_request_irq(priv->device, + (priv->txq[queue_num])->irq_no, + sxgbe_tx_interrupt, 0, + dev->name, priv->txq[queue_num]); + if (unlikely(ret < 0)) { + netdev_err(dev, "%s: ERROR: allocating TX IRQ %d (error: %d)\n", + __func__, priv->irq, ret); + goto init_error; + } + } + + /* Request RX DMA irq lines */ + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) { + ret = devm_request_irq(priv->device, + (priv->rxq[queue_num])->irq_no, + sxgbe_rx_interrupt, 0, + dev->name, priv->rxq[queue_num]); + if (unlikely(ret < 0)) { + netdev_err(dev, "%s: ERROR: allocating TX IRQ %d (error: %d)\n", + __func__, priv->irq, ret); + goto init_error; + } + } + + /* Enable the MAC Rx/Tx */ + priv->hw->mac->enable_tx(priv->ioaddr, true); + priv->hw->mac->enable_rx(priv->ioaddr, true); + + /* Set the HW DMA mode and the COE */ + sxgbe_mtl_operation_mode(priv); + + /* Extra statistics */ + memset(&priv->xstats, 0, sizeof(struct sxgbe_extra_stats)); + + priv->xstats.tx_threshold = priv->tx_tc; + priv->xstats.rx_threshold = priv->rx_tc; + + /* Start the ball rolling... */ + netdev_dbg(dev, "DMA RX/TX processes started...\n"); + priv->hw->dma->start_tx(priv->ioaddr, SXGBE_TX_QUEUES); + priv->hw->dma->start_rx(priv->ioaddr, SXGBE_RX_QUEUES); + + if (priv->phydev) + phy_start(priv->phydev); + + /* initalise TX coalesce parameters */ + sxgbe_tx_init_coalesce(priv); + + if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) { + priv->rx_riwt = SXGBE_MAX_DMA_RIWT; + priv->hw->dma->rx_watchdog(priv->ioaddr, SXGBE_MAX_DMA_RIWT); + } + + napi_enable(&priv->napi); + netif_start_queue(dev); + + return 0; + +init_error: + free_dma_desc_resources(priv); + if (priv->phydev) + phy_disconnect(priv->phydev); +phy_error: + clk_disable_unprepare(priv->sxgbe_clk); + + return ret; +} + +/** + * sxgbe_release - close entry point of the driver + * @dev : device pointer. + * Description: + * This is the stop entry point of the driver. + */ +static int sxgbe_release(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + + /* Stop and disconnect the PHY */ + if (priv->phydev) { + phy_stop(priv->phydev); + phy_disconnect(priv->phydev); + priv->phydev = NULL; + } + + netif_tx_stop_all_queues(dev); + + napi_disable(&priv->napi); + + /* delete TX timers */ + sxgbe_tx_del_timer(priv); + + /* Stop TX/RX DMA and clear the descriptors */ + priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES); + priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES); + + /* disable MTL queue */ + sxgbe_disable_mtl_engine(priv); + + /* Release and free the Rx/Tx resources */ + free_dma_desc_resources(priv); + + /* Disable the MAC Rx/Tx */ + priv->hw->mac->enable_tx(priv->ioaddr, false); + priv->hw->mac->enable_rx(priv->ioaddr, false); + + clk_disable_unprepare(priv->sxgbe_clk); + + return 0; +} + +/** + * sxgbe_xmit: Tx entry point of the driver + * @skb : the socket buffer + * @dev : device pointer + * Description : this is the tx entry point of the driver. + * It programs the chain or the ring and supports oversized frames + * and SG feature. + */ +static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned int entry, frag_num; + struct netdev_queue *dev_txq; + unsigned txq_index = skb_get_queue_mapping(skb); + struct sxgbe_priv_data *priv = netdev_priv(dev); + unsigned int tx_rsize = priv->dma_tx_size; + struct sxgbe_tx_queue *tqueue = priv->txq[txq_index]; + struct sxgbe_tx_norm_desc *tx_desc, *first_desc; + int nr_frags = skb_shinfo(skb)->nr_frags; + int no_pagedlen = skb_headlen(skb); + int is_jumbo = 0; + + /* get the TX queue handle */ + dev_txq = netdev_get_tx_queue(dev, txq_index); + + /* get the spinlock */ + spin_lock(&tqueue->tx_lock); + + if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) < nr_frags + 1)) { + if (!netif_tx_queue_stopped(dev_txq)) { + netif_tx_stop_queue(dev_txq); + netdev_err(dev, "%s: Tx Ring is full when %d queue is awake\n", + __func__, txq_index); + } + /* release the spin lock in case of BUSY */ + spin_unlock(&tqueue->tx_lock); + return NETDEV_TX_BUSY; + } + + entry = tqueue->cur_tx % tx_rsize; + tx_desc = tqueue->dma_tx + entry; + + first_desc = tx_desc; + + /* save the skb address */ + tqueue->tx_skbuff[entry] = skb; + + if (!is_jumbo) { + tx_desc->tdes01 = dma_map_single(priv->device, skb->data, + no_pagedlen, DMA_TO_DEVICE); + if (dma_mapping_error(priv->device, tx_desc->tdes01)) + pr_err("%s: TX dma mapping failed!!\n", __func__); + + priv->hw->desc->prepare_tx_desc(tx_desc, 1, no_pagedlen, + no_pagedlen); + } + + for (frag_num = 0; frag_num < nr_frags; frag_num++) { + const skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_num]; + int len = skb_frag_size(frag); + + entry = (++tqueue->cur_tx) % tx_rsize; + tx_desc = tqueue->dma_tx + entry; + tx_desc->tdes01 = skb_frag_dma_map(priv->device, frag, 0, len, + DMA_TO_DEVICE); + + tqueue->tx_skbuff_dma[entry] = tx_desc->tdes01; + tqueue->tx_skbuff[entry] = NULL; + + /* prepare the descriptor */ + priv->hw->desc->prepare_tx_desc(tx_desc, 0, len, + len); + /* memory barrier to flush descriptor */ + wmb(); + + /* set the owner */ + priv->hw->desc->set_tx_owner(tx_desc); + } + + /* close the descriptors */ + priv->hw->desc->close_tx_desc(tx_desc); + + /* memory barrier to flush descriptor */ + wmb(); + + tqueue->tx_count_frames += nr_frags + 1; + if (tqueue->tx_count_frames > tqueue->tx_coal_frames) { + priv->hw->desc->clear_tx_ic(tx_desc); + priv->xstats.tx_reset_ic_bit++; + mod_timer(&tqueue->txtimer, + SXGBE_COAL_TIMER(tqueue->tx_coal_timer)); + } else { + tqueue->tx_count_frames = 0; + } + + /* set owner for first desc */ + priv->hw->desc->set_tx_owner(first_desc); + + /* memory barrier to flush descriptor */ + wmb(); + + tqueue->cur_tx++; + + /* display current ring */ + netif_dbg(priv, pktdata, dev, "%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d\n", + __func__, tqueue->cur_tx % tx_rsize, + tqueue->dirty_tx % tx_rsize, entry, + first_desc, nr_frags); + + if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) <= (MAX_SKB_FRAGS + 1))) { + netif_dbg(priv, hw, dev, "%s: stop transmitted packets\n", + __func__); + netif_tx_stop_queue(dev_txq); + } + + dev->stats.tx_bytes += skb->len; + + if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + tqueue->hwts_tx_en)) { + /* declare that device is doing timestamping */ + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + priv->hw->desc->tx_enable_tstamp(first_desc); + } + + if (!tqueue->hwts_tx_en) + skb_tx_timestamp(skb); + + priv->hw->dma->enable_dma_transmission(priv->ioaddr, txq_index); + + spin_unlock(&tqueue->tx_lock); + + return NETDEV_TX_OK; +} + +/** + * sxgbe_rx_refill: refill used skb preallocated buffers + * @priv: driver private structure + * Description : this is to reallocate the skb for the reception process + * that is based on zero-copy. + */ +static void sxgbe_rx_refill(struct sxgbe_priv_data *priv) +{ + unsigned int rxsize = priv->dma_rx_size; + int bfsize = priv->dma_buf_sz; + u8 qnum = priv->cur_rx_qnum; + + for (; priv->rxq[qnum]->cur_rx - priv->rxq[qnum]->dirty_rx > 0; + priv->rxq[qnum]->dirty_rx++) { + unsigned int entry = priv->rxq[qnum]->dirty_rx % rxsize; + struct sxgbe_rx_norm_desc *p; + + p = priv->rxq[qnum]->dma_rx + entry; + + if (likely(priv->rxq[qnum]->rx_skbuff[entry] == NULL)) { + struct sk_buff *skb; + + skb = netdev_alloc_skb_ip_align(priv->dev, bfsize); + + if (unlikely(skb == NULL)) + break; + + priv->rxq[qnum]->rx_skbuff[entry] = skb; + priv->rxq[qnum]->rx_skbuff_dma[entry] = + dma_map_single(priv->device, skb->data, bfsize, + DMA_FROM_DEVICE); + + p->rdes23.rx_rd_des23.buf2_addr = + priv->rxq[qnum]->rx_skbuff_dma[entry]; + } + + /* Added memory barrier for RX descriptor modification */ + wmb(); + priv->hw->desc->set_rx_owner(p); + /* Added memory barrier for RX descriptor modification */ + wmb(); + } +} + +/** + * sxgbe_rx: receive the frames from the remote host + * @priv: driver private structure + * @limit: napi bugget. + * Description : this the function called by the napi poll method. + * It gets all the frames inside the ring. + */ +static int sxgbe_rx(struct sxgbe_priv_data *priv, int limit) +{ + u8 qnum = priv->cur_rx_qnum; + unsigned int rxsize = priv->dma_rx_size; + unsigned int entry = priv->rxq[qnum]->cur_rx; + unsigned int next_entry = 0; + unsigned int count = 0; + + while (count < limit) { + struct sxgbe_rx_norm_desc *p; + struct sk_buff *skb; + int frame_len; + + p = priv->rxq[qnum]->dma_rx + entry; + + if (priv->hw->desc->get_rx_owner(p)) + break; + + count++; + + next_entry = (++priv->rxq[qnum]->cur_rx) % rxsize; + prefetch(priv->rxq[qnum]->dma_rx + next_entry); + + /*TO DO read the status of the incoming frame */ + + skb = priv->rxq[qnum]->rx_skbuff[entry]; + + if (unlikely(!skb)) + netdev_err(priv->dev, "rx descriptor is not consistent\n"); + + prefetch(skb->data - NET_IP_ALIGN); + priv->rxq[qnum]->rx_skbuff[entry] = NULL; + + frame_len = priv->hw->desc->get_rx_frame_len(p); + + skb_put(skb, frame_len); + + netif_receive_skb(skb); + + entry = next_entry; + } + + sxgbe_rx_refill(priv); + + return count; +} + +/** + * sxgbe_poll - sxgbe poll method (NAPI) + * @napi : pointer to the napi structure. + * @budget : maximum number of packets that the current CPU can receive from + * all interfaces. + * Description : + * To look at the incoming frames and clear the tx resources. + */ +static int sxgbe_poll(struct napi_struct *napi, int budget) +{ + struct sxgbe_priv_data *priv = container_of(napi, + struct sxgbe_priv_data, napi); + int work_done = 0; + u8 qnum = priv->cur_rx_qnum; + + priv->xstats.napi_poll++; + /* first, clean the tx queues */ + sxgbe_tx_all_clean(priv); + + work_done = sxgbe_rx(priv, budget); + if (work_done < budget) { + napi_complete(napi); + priv->hw->dma->enable_dma_irq(priv->ioaddr, qnum); + } + + return work_done; +} + +/** + * sxgbe_tx_timeout + * @dev : Pointer to net device structure + * Description: this function is called when a packet transmission fails to + * complete within a reasonable time. The driver will mark the error in the + * netdev structure and arrange for the device to be reset to a sane state + * in order to transmit a new packet. + */ +static void sxgbe_tx_timeout(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + sxgbe_reset_all_tx_queues(priv); +} + +/** + * sxgbe_common_interrupt - main ISR + * @irq: interrupt number. + * @dev_id: to pass the net device pointer. + * Description: this is the main driver interrupt service routine. + * It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI + * interrupts. + */ +static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id) +{ + return IRQ_HANDLED; +} + +/** + * sxgbe_tx_interrupt - TX DMA ISR + * @irq: interrupt number. + * @dev_id: to pass the net device pointer. + * Description: this is the tx dma interrupt service routine. + */ +static irqreturn_t sxgbe_tx_interrupt(int irq, void *dev_id) +{ + int status; + struct sxgbe_tx_queue *txq = (struct sxgbe_tx_queue *)dev_id; + struct sxgbe_priv_data *priv = txq->priv_ptr; + + /* get the channel status */ + status = priv->hw->dma->tx_dma_int_status(priv->ioaddr, txq->queue_no, + &priv->xstats); + /* check for normal path */ + if (likely((status & handle_tx))) + napi_schedule(&priv->napi); + + /* check for unrecoverable error */ + if (unlikely((status & tx_hard_error))) + sxgbe_restart_tx_queue(priv, txq->queue_no); + + /* check for TC configuration change */ + if (unlikely((status & tx_bump_tc) && + (priv->tx_tc != SXGBE_MTL_SFMODE) && + (priv->tx_tc < 512))) { + /* step of TX TC is 32 till 128, otherwise 64 */ + priv->tx_tc += (priv->tx_tc < 128) ? 32 : 64; + priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, + txq->queue_no, priv->tx_tc); + priv->xstats.tx_threshold = priv->tx_tc; + } + + return IRQ_HANDLED; +} + +/** + * sxgbe_rx_interrupt - RX DMA ISR + * @irq: interrupt number. + * @dev_id: to pass the net device pointer. + * Description: this is the rx dma interrupt service routine. + */ +static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id) +{ + int status; + struct sxgbe_rx_queue *rxq = (struct sxgbe_rx_queue *)dev_id; + struct sxgbe_priv_data *priv = rxq->priv_ptr; + + /* get the channel status */ + status = priv->hw->dma->rx_dma_int_status(priv->ioaddr, rxq->queue_no, + &priv->xstats); + + if (likely((status & handle_rx) && (napi_schedule_prep(&priv->napi)))) { + priv->hw->dma->disable_dma_irq(priv->ioaddr, rxq->queue_no); + __napi_schedule(&priv->napi); + } + + /* check for TC configuration change */ + if (unlikely((status & rx_bump_tc) && + (priv->rx_tc != SXGBE_MTL_SFMODE) && + (priv->rx_tc < 128))) { + /* step of TC is 32 */ + priv->rx_tc += 32; + priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, + rxq->queue_no, priv->rx_tc); + priv->xstats.rx_threshold = priv->rx_tc; + } + + return IRQ_HANDLED; +} + +static inline u64 sxgbe_get_stat64(void __iomem *ioaddr, int reg_lo, int reg_hi) +{ + u64 val = readl(ioaddr + reg_lo); + + val |= ((u64)readl(ioaddr + reg_hi)) << 32; + + return val; +} + + +/* sxgbe_get_stats64 - entry point to see statistical information of device + * @dev : device pointer. + * @stats : pointer to hold all the statistical information of device. + * Description: + * This function is a driver entry point whenever ifconfig command gets + * executed to see device statistics. Statistics are number of + * bytes sent or received, errors occured etc. + * Return value: + * This function returns various statistical information of device. + */ +static struct rtnl_link_stats64 *sxgbe_get_stats64(struct net_device *dev, + struct rtnl_link_stats64 *stats) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + void __iomem *ioaddr = priv->ioaddr; + u64 count; + + spin_lock(&priv->stats_lock); + /* Freeze the counter registers before reading value otherwise it may + * get updated by hardware while we are reading them + */ + writel(SXGBE_MMC_CTRL_CNT_FRZ, ioaddr + SXGBE_MMC_CTL_REG); + + stats->rx_bytes = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXOCTETLO_GCNT_REG, + SXGBE_MMC_RXOCTETHI_GCNT_REG); + + stats->rx_packets = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXFRAMELO_GBCNT_REG, + SXGBE_MMC_RXFRAMEHI_GBCNT_REG); + + stats->multicast = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXMULTILO_GCNT_REG, + SXGBE_MMC_RXMULTIHI_GCNT_REG); + + stats->rx_crc_errors = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXCRCERRLO_REG, + SXGBE_MMC_RXCRCERRHI_REG); + + stats->rx_length_errors = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXLENERRLO_REG, + SXGBE_MMC_RXLENERRHI_REG); + + stats->rx_missed_errors = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXFIFOOVERFLOWLO_GBCNT_REG, + SXGBE_MMC_RXFIFOOVERFLOWHI_GBCNT_REG); + + stats->tx_bytes = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_TXOCTETLO_GCNT_REG, + SXGBE_MMC_TXOCTETHI_GCNT_REG); + + count = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXFRAMELO_GBCNT_REG, + SXGBE_MMC_TXFRAMEHI_GBCNT_REG); + + stats->tx_errors = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXFRAMELO_GCNT_REG, + SXGBE_MMC_TXFRAMEHI_GCNT_REG); + stats->tx_errors = count - stats->tx_errors; + stats->tx_packets = count; + stats->tx_fifo_errors = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXUFLWLO_GBCNT_REG, + SXGBE_MMC_TXUFLWHI_GBCNT_REG); + writel(0, ioaddr + SXGBE_MMC_CTL_REG); + spin_unlock(&priv->stats_lock); + + return stats; +} + +/* sxgbe_set_features - entry point to set offload features of the device. + * @dev : device pointer. + * @features : features which are required to be set. + * Description: + * This function is a driver entry point and called by Linux kernel whenever + * any device features are set or reset by user. + * Return value: + * This function returns 0 after setting or resetting device features. + */ +static int sxgbe_set_features(struct net_device *dev, + netdev_features_t features) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + netdev_features_t changed = dev->features ^ features; + u32 ctrl; + + if (changed & NETIF_F_RXCSUM) { + ctrl = readl(priv->ioaddr + SXGBE_CORE_RX_CONFIG_REG); + if (features & NETIF_F_RXCSUM) + ctrl |= SXGBE_RX_CSUMOFFLOAD_ENABLE; + else + ctrl &= ~SXGBE_RX_CSUMOFFLOAD_ENABLE; + writel(ctrl, priv->ioaddr + SXGBE_CORE_RX_CONFIG_REG); + } + + return 0; +} + +/* sxgbe_change_mtu - entry point to change MTU size for the device. + * @dev : device pointer. + * @new_mtu : the new MTU size for the device. + * Description: the Maximum Transfer Unit (MTU) is used by the network layer + * to drive packet transmission. Ethernet has an MTU of 1500 octets + * (ETH_DATA_LEN). This value can be changed with ifconfig. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int sxgbe_change_mtu(struct net_device *dev, int new_mtu) +{ + /* RFC 791, page 25, "Every internet module must be able to forward + * a datagram of 68 octets without further fragmentation." + */ + if (new_mtu < MIN_MTU || (new_mtu > MAX_MTU)) { + netdev_err(dev, "invalid MTU, MTU should be in between %d and %d\n", + MIN_MTU, MAX_MTU); + return -EINVAL; + } + + /* Return if the buffer sizes will not change */ + if (dev->mtu == new_mtu) + return 0; + + dev->mtu = new_mtu; + + if (!netif_running(dev)) + return 0; + + /* Recevice ring buffer size is needed to be set based on MTU. If MTU is + * changed then reinitilisation of the receive ring buffers need to be + * done. Hence bring interface down and bring interface back up + */ + sxgbe_release(dev); + return sxgbe_open(dev); +} + +static void sxgbe_set_umac_addr(void __iomem *ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + unsigned long data; + + data = (addr[5] << 8) | addr[4]; + /* For MAC Addr registers se have to set the Address Enable (AE) + * bit that has no effect on the High Reg 0 where the bit 31 (MO) + * is RO. + */ + writel(data | SXGBE_HI_REG_AE, ioaddr + SXGBE_ADDR_HIGH(reg_n)); + data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; + writel(data, ioaddr + SXGBE_ADDR_LOW(reg_n)); +} + +/** + * sxgbe_set_rx_mode - entry point for setting different receive mode of + * a device. unicast, multicast addressing + * @dev : pointer to the device structure + * Description: + * This function is a driver entry point which gets called by the kernel + * whenever different receive mode like unicast, multicast and promiscuous + * must be enabled/disabled. + * Return value: + * void. + */ +static void sxgbe_set_rx_mode(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + void __iomem *ioaddr = (void __iomem *)priv->ioaddr; + unsigned int value = 0; + u32 mc_filter[2]; + struct netdev_hw_addr *ha; + int reg = 1; + + netdev_dbg(dev, "%s: # mcasts %d, # unicast %d\n", + __func__, netdev_mc_count(dev), netdev_uc_count(dev)); + + if (dev->flags & IFF_PROMISC) { + value = SXGBE_FRAME_FILTER_PR; + } else if ((netdev_mc_count(dev) > SXGBE_HASH_TABLE_SIZE) || + (dev->flags & IFF_ALLMULTI)) { + value = SXGBE_FRAME_FILTER_PM; /* pass all multi */ + writel(0xffffffff, ioaddr + SXGBE_HASH_HIGH); + writel(0xffffffff, ioaddr + SXGBE_HASH_LOW); + } else if (!netdev_mc_empty(dev)) { + /* Hash filter for multicast */ + value = SXGBE_FRAME_FILTER_HMC; + + memset(mc_filter, 0, sizeof(mc_filter)); + netdev_for_each_mc_addr(ha, dev) { + /* The upper 6 bits of the calculated CRC are used to + * index the contens of the hash table + */ + int bit_nr = bitrev32(~crc32_le(~0, ha->addr, 6)) >> 26; + /* The most significant bit determines the register to + * use (H/L) while the other 5 bits determine the bit + * within the register. + */ + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + writel(mc_filter[0], ioaddr + SXGBE_HASH_LOW); + writel(mc_filter[1], ioaddr + SXGBE_HASH_HIGH); + } + + /* Handle multiple unicast addresses (perfect filtering) */ + if (netdev_uc_count(dev) > SXGBE_MAX_PERFECT_ADDRESSES) + /* Switch to promiscuous mode if more than 16 addrs + * are required + */ + value |= SXGBE_FRAME_FILTER_PR; + else { + netdev_for_each_uc_addr(ha, dev) { + sxgbe_set_umac_addr(ioaddr, ha->addr, reg); + reg++; + } + } +#ifdef FRAME_FILTER_DEBUG + /* Enable Receive all mode (to debug filtering_fail errors) */ + value |= SXGBE_FRAME_FILTER_RA; +#endif + writel(value, ioaddr + SXGBE_FRAME_FILTER); + + netdev_dbg(dev, "Filter: 0x%08x\n\tHash: HI 0x%08x, LO 0x%08x\n", + readl(ioaddr + SXGBE_FRAME_FILTER), + readl(ioaddr + SXGBE_HASH_HIGH), + readl(ioaddr + SXGBE_HASH_LOW)); +} + +/** + * sxgbe_config - entry point for changing configuration mode passed on by + * ifconfig + * @dev : pointer to the device structure + * @map : pointer to the device mapping structure + * Description: + * This function is a driver entry point which gets called by the kernel + * whenever some device configuration is changed. + * Return value: + * This function returns 0 if success and appropriate error otherwise. + */ +static int sxgbe_config(struct net_device *dev, struct ifmap *map) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + + /* Can't act on a running interface */ + if (dev->flags & IFF_UP) + return -EBUSY; + + /* Don't allow changing the I/O address */ + if (map->base_addr != (unsigned long)priv->ioaddr) { + netdev_warn(dev, "can't change I/O address\n"); + return -EOPNOTSUPP; + } + + /* Don't allow changing the IRQ */ + if (map->irq != priv->irq) { + netdev_warn(dev, "not change IRQ number %d\n", priv->irq); + return -EOPNOTSUPP; + } + + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * sxgbe_poll_controller - entry point for polling receive by device + * @dev : pointer to the device structure + * Description: + * This function is used by NETCONSOLE and other diagnostic tools + * to allow network I/O with interrupts disabled. + * Return value: + * Void. + */ +static void sxgbe_poll_controller(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + + disable_irq(priv->irq); + sxgbe_rx_interrupt(priv->irq, dev); + enable_irq(priv->irq); +} +#endif + +/* sxgbe_ioctl - Entry point for the Ioctl + * @dev: Device pointer. + * @rq: An IOCTL specefic structure, that can contain a pointer to + * a proprietary structure used to pass information to the driver. + * @cmd: IOCTL command + * Description: + * Currently it supports the phy_mii_ioctl(...) and HW time stamping. + */ +static int sxgbe_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + if (!netif_running(dev)) + return -EINVAL; + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + if (!priv->phydev) + return -EINVAL; + ret = phy_mii_ioctl(priv->phydev, rq, cmd); + break; + default: + break; + } + + return ret; +} + +static const struct net_device_ops sxgbe_netdev_ops = { + .ndo_open = sxgbe_open, + .ndo_start_xmit = sxgbe_xmit, + .ndo_stop = sxgbe_release, + .ndo_get_stats64 = sxgbe_get_stats64, + .ndo_change_mtu = sxgbe_change_mtu, + .ndo_set_features = sxgbe_set_features, + .ndo_set_rx_mode = sxgbe_set_rx_mode, + .ndo_tx_timeout = sxgbe_tx_timeout, + .ndo_do_ioctl = sxgbe_ioctl, + .ndo_set_config = sxgbe_config, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = sxgbe_poll_controller, +#endif + .ndo_set_mac_address = eth_mac_addr, +}; + +/* Get the hardware ops */ +void sxgbe_get_ops(struct sxgbe_ops * const ops_ptr) +{ + ops_ptr->mac = sxgbe_get_core_ops(); + ops_ptr->desc = sxgbe_get_desc_ops(); + ops_ptr->dma = sxgbe_get_dma_ops(); + ops_ptr->mtl = sxgbe_get_mtl_ops(); + + /* set the MDIO communication Address/Data regisers */ + ops_ptr->mii.addr = SXGBE_MDIO_SCMD_ADD_REG; + ops_ptr->mii.data = SXGBE_MDIO_SCMD_DATA_REG; + + /* Assigning the default link settings + * no SXGBE defined default values to be set in registers, + * so assigning as 0 for port and duplex + */ + ops_ptr->link.port = 0; + ops_ptr->link.duplex = 0; + ops_ptr->link.speed = SXGBE_SPEED_10G; +} + +/** + * sxgbe_hw_init - Init the GMAC device + * @priv: driver private structure + * Description: this function checks the HW capability + * (if supported) and sets the driver's features. + */ +static int sxgbe_hw_init(struct sxgbe_priv_data * const priv) +{ + u32 ctrl_ids; + + /* get the hardware ops */ + sxgbe_get_ops(priv->hw); + + /* get the controller id */ + ctrl_ids = priv->hw->mac->get_controller_version(priv->ioaddr); + priv->hw->ctrl_uid = (ctrl_ids & 0x00ff0000) >> 16; + priv->hw->ctrl_id = (ctrl_ids & 0x000000ff); + pr_info("user ID: 0x%x, Controller ID: 0x%x\n", + priv->hw->ctrl_uid, priv->hw->ctrl_id); + + /* get the H/W features */ + if (!sxgbe_get_hw_features(priv)) + pr_info("Hardware features not found\n"); + + if (priv->hw_cap.tx_csum_offload) + pr_info("TX Checksum offload supported\n"); + + if (priv->hw_cap.rx_csum_offload) + pr_info("RX Checksum offload supported\n"); + + return 0; +} + +/** + * sxgbe_dvr_probe + * @device: device pointer + * @plat_dat: platform data pointer + * @addr: iobase memory address + * Description: this is the main probe function used to + * call the alloc_etherdev, allocate the priv structure. + */ +struct sxgbe_priv_data *sxgbe_dvr_probe(struct device *device, + struct sxgbe_plat_data *plat_dat, + void __iomem *addr) +{ + int ret = 0; + struct net_device *ndev = NULL; + struct sxgbe_priv_data *priv; + + ndev = alloc_etherdev_mqs(sizeof(struct sxgbe_priv_data), + SXGBE_TX_QUEUES, SXGBE_RX_QUEUES); + if (!ndev) + return NULL; + + SET_NETDEV_DEV(ndev, device); + + priv = netdev_priv(ndev); + priv->device = device; + priv->dev = ndev; + + ether_setup(ndev); + + sxgbe_set_ethtool_ops(ndev); + priv->plat = plat_dat; + priv->ioaddr = addr; + + /* Init MAC and get the capabilities */ + ret = sxgbe_hw_init(priv); + if (ret) + goto error_free_netdev; + + /* allocate memory resources for Descriptor rings */ + ret = txring_mem_alloc(priv); + if (ret) + goto error_free_netdev; + + ret = rxring_mem_alloc(priv); + if (ret) + goto error_free_netdev; + + ndev->netdev_ops = &sxgbe_netdev_ops; + + ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM; + ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA; + ndev->watchdog_timeo = msecs_to_jiffies(TX_TIMEO); + + /* assign filtering support */ + ndev->priv_flags |= IFF_UNICAST_FLT; + + priv->msg_enable = netif_msg_init(debug, default_msg_level); + + if (flow_ctrl) + priv->flow_ctrl = SXGBE_FLOW_AUTO; /* RX/TX pause on */ + + /* Rx Watchdog is available, enable depend on platform data */ + if (!priv->plat->riwt_off) { + priv->use_riwt = 1; + pr_info("Enable RX Mitigation via HW Watchdog Timer\n"); + } + + netif_napi_add(ndev, &priv->napi, sxgbe_poll, 64); + + spin_lock_init(&priv->stats_lock); + + priv->sxgbe_clk = clk_get(priv->device, SXGBE_RESOURCE_NAME); + if (IS_ERR(priv->sxgbe_clk)) { + netdev_warn(ndev, "%s: warning: cannot get CSR clock\n", + __func__); + goto error_clk_get; + } + + /* If a specific clk_csr value is passed from the platform + * this means that the CSR Clock Range selection cannot be + * changed at run-time and it is fixed. Viceversa the driver'll try to + * set the MDC clock dynamically according to the csr actual + * clock input. + */ + if (!priv->plat->clk_csr) + sxgbe_clk_csr_set(priv); + else + priv->clk_csr = priv->plat->clk_csr; + + /* MDIO bus Registration */ + ret = sxgbe_mdio_register(ndev); + if (ret < 0) { + netdev_dbg(ndev, "%s: MDIO bus (id: %d) registration failed\n", + __func__, priv->plat->bus_id); + goto error_mdio_register; + } + + ret = register_netdev(ndev); + if (ret) { + pr_err("%s: ERROR %i registering the device\n", __func__, ret); + goto error_netdev_register; + } + + sxgbe_check_ether_addr(priv); + + return priv; + +error_mdio_register: + clk_put(priv->sxgbe_clk); +error_clk_get: + unregister_netdev(ndev); +error_netdev_register: + netif_napi_del(&priv->napi); +error_free_netdev: + free_netdev(ndev); + + return NULL; +} + +/** + * sxgbe_dvr_remove + * @ndev: net device pointer + * Description: this function resets the TX/RX processes, disables the MAC RX/TX + * changes the link status, releases the DMA descriptor rings. + */ +int sxgbe_dvr_remove(struct net_device *ndev) +{ + struct sxgbe_priv_data *priv = netdev_priv(ndev); + + netdev_info(ndev, "%s: removing driver\n", __func__); + + priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES); + priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES); + + priv->hw->mac->enable_tx(priv->ioaddr, false); + priv->hw->mac->enable_rx(priv->ioaddr, false); + + netif_napi_del(&priv->napi); + + sxgbe_mdio_unregister(ndev); + + unregister_netdev(ndev); + + free_netdev(ndev); + + return 0; +} + +#ifdef CONFIG_PM +int sxgbe_suspend(struct net_device *ndev) +{ + return 0; +} + +int sxgbe_resume(struct net_device *ndev) +{ + return 0; +} + +int sxgbe_freeze(struct net_device *ndev) +{ + return -ENOSYS; +} + +int sxgbe_restore(struct net_device *ndev) +{ + return -ENOSYS; +} +#endif /* CONFIG_PM */ + +/* Driver is configured as Platform driver */ +static int __init sxgbe_init(void) +{ + int ret; + + ret = sxgbe_register_platform(); + if (ret) + goto err; + return 0; +err: + pr_err("driver registration failed\n"); + return ret; +} + +static void __exit sxgbe_exit(void) +{ + sxgbe_unregister_platform(); +} + +module_init(sxgbe_init); +module_exit(sxgbe_exit); + +#ifndef MODULE +static int __init sxgbe_cmdline_opt(char *str) +{ + return 0; +} + +__setup("sxgbeeth=", sxgbe_cmdline_opt); +#endif /* MODULE */ + + + +MODULE_DESCRIPTION("SAMSUNG 10G/2.5G/1G Ethernet PLATFORM driver"); + +MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)"); + +MODULE_AUTHOR("Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx>"); +MODULE_AUTHOR("ByungHo An <bh74.an@xxxxxxxxxxx>"); +MODULE_AUTHOR("Girish K S <ks.giri@xxxxxxxxxxx>"); +MODULE_AUTHOR("Vipul Pandya <vipul.pandya@xxxxxxxxxxx>"); + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c new file mode 100644 index 0000000..7d02112 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c @@ -0,0 +1,271 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/io.h> +#include <linux/mii.h> +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/phy.h> +#include <linux/slab.h> +#include <linux/sxgbe_platform.h> + +#include "sxgbe_common.h" +#include "sxgbe_reg.h" + +#define SXGBE_SMA_WRITE_CMD 0x01 /* write command */ +#define SXGBE_SMA_PREAD_CMD 0x02 /* post read increament address */ +#define SXGBE_SMA_READ_CMD 0x03 /* read command */ +#define SXGBE_SMA_SKIP_ADDRFRM 0x00040000 /* skip the address frame */ +#define SXGBE_MII_BUSY 0x00800000 /* mii busy */ + +static int sxgbe_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_data) +{ + unsigned long fin_time = jiffies + 3 * HZ; /* 3 seconds */ + + while (!time_after(jiffies, fin_time)) { + if (!(readl(ioaddr + mii_data) & SXGBE_MII_BUSY)) + return 0; + cpu_relax(); + } + + return -EBUSY; +} + +/** + * sxgbe_mdio_read + * @bus: points to the mii_bus structure + * @phyaddr: address of phy port + * @phyreg: address of register with in phy register + * Description: this function used for C45 and C22 MDIO Read + */ +static int sxgbe_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) +{ + struct net_device *ndev = bus->priv; + struct sxgbe_priv_data *priv = netdev_priv(ndev); + u32 devaddr, reg_val; + u32 mii_addr = priv->hw->mii.addr; + u32 mii_data = priv->hw->mii.data; + + /* check for busy wait */ + if (sxgbe_mdio_busy_wait(priv->ioaddr, mii_data)) + return -EBUSY; + + if (phyreg & MII_ADDR_C45) { + devaddr = (phyreg >> 16) & 0x1F; + /* set mdio address register */ + reg_val = (phyaddr << 16) | (devaddr << 21) | (phyreg & 0xFFFF); + writel(reg_val, priv->ioaddr + mii_addr); + + /* set mdio control/data register */ + reg_val = ((SXGBE_SMA_READ_CMD << 16) | SXGBE_SMA_SKIP_ADDRFRM | + ((priv->clk_csr & 0x7) << 19) | SXGBE_MII_BUSY); + writel(reg_val, priv->ioaddr + mii_data); + } else { + /* configure the port for C22 + * ports 0-3 only supports C22 + */ + if (phyaddr >= 4) + return -ENODEV; + writel((1 << phyaddr), + priv->ioaddr + SXGBE_MDIO_CLAUSE22_PORT_REG); + /* set mdio address register */ + reg_val = (phyaddr << 16) | (phyreg & 0x1F); + writel(reg_val, priv->ioaddr + mii_addr); + + /* set mdio control/data register */ + reg_val = ((SXGBE_SMA_READ_CMD << 16) | SXGBE_SMA_SKIP_ADDRFRM | + ((priv->clk_csr & 0x7) << 19) | SXGBE_MII_BUSY); + writel(reg_val, priv->ioaddr + mii_data); + } + + /* wait till operation succeds */ + if (sxgbe_mdio_busy_wait(priv->ioaddr, mii_data)) + return -EBUSY; + + /* read and return the data from mmi Data register */ + reg_val = readl(priv->ioaddr + mii_data) & 0xFFFF; + return reg_val; +} +/** + * sxgbe_mdio_write + * @bus: points to the mii_bus structure + * @phyaddr: address of phy port + * @phyreg: address of phy registers + * @phydata: data to be written into phy register + * Description: this function is used for C45 and C22 MDIO write + */ +static int sxgbe_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, + u16 phydata) +{ + struct net_device *ndev = bus->priv; + struct sxgbe_priv_data *priv = netdev_priv(ndev); + u32 devaddr, reg_val; + u32 mii_addr = priv->hw->mii.addr; + u32 mii_data = priv->hw->mii.data; + + /* check for busy wait */ + if (sxgbe_mdio_busy_wait(priv->ioaddr, mii_data)) + return -EBUSY; + + if (phyreg & MII_ADDR_C45) { + devaddr = (phyreg >> 16) & 0x1F; + /* set mdio address register */ + reg_val = (phyaddr << 16) | (devaddr << 21) | (phyreg & 0xFFFF); + writel(reg_val, priv->ioaddr + mii_addr); + + /* set mdio control/data register */ + reg_val = ((SXGBE_SMA_WRITE_CMD << 16) | + SXGBE_SMA_SKIP_ADDRFRM | + ((priv->clk_csr & 0x7) << 19) | SXGBE_MII_BUSY); + reg_val |= phydata; + + writel(reg_val, priv->ioaddr + mii_data); + } else { + /* configure the port for C22 + * ports 0-3 only supports C22 + */ + if (phyaddr >= 4) + return -ENODEV; + + writel((1 << phyaddr), + priv->ioaddr + SXGBE_MDIO_CLAUSE22_PORT_REG); + + /* set mdio address register */ + reg_val = (phyaddr << 16) | (phyreg & 0x1F); + writel(reg_val, priv->ioaddr + mii_addr); + + /* set mdio control/data register */ + reg_val = ((SXGBE_SMA_WRITE_CMD << 16) | + SXGBE_SMA_SKIP_ADDRFRM | + ((priv->clk_csr & 0x7) << 19) | SXGBE_MII_BUSY); + reg_val |= phydata; + writel(reg_val, priv->ioaddr + mii_data); + } + + /* wait till operation succeds */ + if (sxgbe_mdio_busy_wait(priv->ioaddr, mii_data)) + return -EBUSY; + + return 0; +} + +int sxgbe_mdio_register(struct net_device *ndev) +{ + int err, phy_addr, act; + int *irqlist; + u8 phy_found = 0; + struct mii_bus *mdio_bus; + struct sxgbe_priv_data *priv = netdev_priv(ndev); + struct sxgbe_mdio_bus_data *mdio_data = priv->plat->mdio_bus_data; + + /* allocate the new mdio bus */ + mdio_bus = mdiobus_alloc(); + if (!mdio_bus) { + netdev_err(ndev, "%s: mii bus allocation failed\n", __func__); + return -ENOMEM; + } + + if (mdio_data->irqs) + irqlist = mdio_data->irqs; + else + irqlist = priv->mii_irq; + + /* assign mii bus fields */ + mdio_bus->name = "samsxgbe"; + mdio_bus->read = &sxgbe_mdio_read; + mdio_bus->write = &sxgbe_mdio_write; + snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-%x", + mdio_bus->name, priv->plat->bus_id); + mdio_bus->priv = ndev; + mdio_bus->phy_mask = mdio_data->phy_mask; + mdio_bus->parent = priv->device; + + /* register with kernel subsystem */ + err = mdiobus_register(mdio_bus); + if (err != 0) { + netdev_err(ndev, "mdiobus register failed\n"); + goto mdiobus_err; + } + + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + struct phy_device *phy = mdio_bus->phy_map[phy_addr]; + if (phy) { + char irq_num[4]; + char *irq_str; + /* If an IRQ was provided to be assigned after + * the bus probe, do it here. + */ + if ((mdio_data->irqs == NULL) && + (mdio_data->probed_phy_irq > 0)) { + irqlist[phy_addr] = mdio_data->probed_phy_irq; + phy->irq = mdio_data->probed_phy_irq; + } + + /* If we're going to bind the MAC to this PHY bus, + * and no PHY number was provided to the MAC, + * use the one probed here. + */ + if (priv->plat->phy_addr == -1) + priv->plat->phy_addr = phy_addr; + + act = (priv->plat->phy_addr == phy_addr); + switch (phy->irq) { + case PHY_POLL: + irq_str = "POLL"; + break; + case PHY_IGNORE_INTERRUPT: + irq_str = "IGNORE"; + break; + default: + sprintf(irq_num, "%d", phy->irq); + irq_str = irq_num; + break; + } + netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n", + phy->phy_id, phy_addr, irq_str, + dev_name(&phy->dev), act ? " active" : ""); + phy_found = 1; + } + } + + if (!phy_found) { + netdev_err(ndev, "PHY not found\n"); + mdiobus_unregister(mdio_bus); + mdiobus_free(mdio_bus); + return -ENODEV; + } + + priv->mii = mdio_bus; + + return 0; + +mdiobus_err: + mdiobus_free(mdio_bus); + return err; +} + +int sxgbe_mdio_unregister(struct net_device *ndev) +{ + struct sxgbe_priv_data *priv = netdev_priv(ndev); + + if (!priv->mii) + return 0; + + mdiobus_unregister(priv->mii); + priv->mii->priv = NULL; + mdiobus_free(priv->mii); + priv->mii = NULL; + + return 0; +} diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c new file mode 100644 index 0000000..d3ec6eb --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c @@ -0,0 +1,252 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/jiffies.h> + +#include "sxgbe_mtl.h" +#include "sxgbe_reg.h" + +static void sxgbe_mtl_init(void __iomem *ioaddr, unsigned int etsalg, + unsigned int raa) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_OP_MODE_REG); + reg_val &= ETS_RST; + + /* ETS Algorith */ + switch (etsalg & SXGBE_MTL_OPMODE_ESTMASK) { + case ETS_WRR: + reg_val &= ETS_WRR; + break; + case ETS_WFQ: + reg_val |= ETS_WFQ; + break; + case ETS_DWRR: + reg_val |= ETS_DWRR; + break; + } + writel(reg_val, ioaddr + SXGBE_MTL_OP_MODE_REG); + + switch (raa & SXGBE_MTL_OPMODE_RAAMASK) { + case RAA_SP: + reg_val &= RAA_SP; + break; + case RAA_WSP: + reg_val |= RAA_WSP; + break; + } + writel(reg_val, ioaddr + SXGBE_MTL_OP_MODE_REG); +} + +/* For Dynamic DMA channel mapping for Rx queue */ +static void sxgbe_mtl_dma_dm_rxqueue(void __iomem *ioaddr) +{ + writel(RX_QUEUE_DYNAMIC, ioaddr + SXGBE_MTL_RXQ_DMAMAP0_REG); + writel(RX_QUEUE_DYNAMIC, ioaddr + SXGBE_MTL_RXQ_DMAMAP1_REG); + writel(RX_QUEUE_DYNAMIC, ioaddr + SXGBE_MTL_RXQ_DMAMAP2_REG); +} + +static void sxgbe_mtl_set_txfifosize(void __iomem *ioaddr, int queue_num, + int queue_fifo) +{ + u32 fifo_bits, reg_val; + /* 0 means 256 bytes */ + fifo_bits = (queue_fifo / SXGBE_MTL_TX_FIFO_DIV)-1; + reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num)); + reg_val |= (fifo_bits << SXGBE_MTL_FIFO_LSHIFT); + writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_mtl_set_rxfifosize(void __iomem *ioaddr, int queue_num, + int queue_fifo) +{ + u32 fifo_bits, reg_val; + /* 0 means 256 bytes */ + fifo_bits = (queue_fifo / SXGBE_MTL_RX_FIFO_DIV)-1; + reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); + reg_val |= (fifo_bits << SXGBE_MTL_FIFO_LSHIFT); + writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_mtl_enable_txqueue(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num)); + reg_val |= SXGBE_MTL_ENABLE_QUEUE; + writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_mtl_disable_txqueue(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num)); + reg_val &= ~SXGBE_MTL_ENABLE_QUEUE; + writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_mtl_fc_active(void __iomem *ioaddr, int queue_num, + int threshold) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); + reg_val &= ~(SXGBE_MTL_FCMASK << RX_FC_ACTIVE); + reg_val |= (threshold << RX_FC_ACTIVE); + + writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_mtl_fc_enable(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); + reg_val |= SXGBE_MTL_ENABLE_FC; + writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_mtl_fc_deactive(void __iomem *ioaddr, int queue_num, + int threshold) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); + reg_val &= ~(SXGBE_MTL_FCMASK << RX_FC_DEACTIVE); + reg_val |= (threshold << RX_FC_DEACTIVE); + + writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_mtl_fep_enable(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); + reg_val |= SXGBE_MTL_RXQ_OP_FEP; + + writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_mtl_fep_disable(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); + reg_val &= ~(SXGBE_MTL_RXQ_OP_FEP); + + writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_mtl_fup_enable(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); + reg_val |= SXGBE_MTL_RXQ_OP_FUP; + + writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_mtl_fup_disable(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); + reg_val &= ~(SXGBE_MTL_RXQ_OP_FUP); + + writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); +} + + +static void sxgbe_set_tx_mtl_mode(void __iomem *ioaddr, int queue_num, + int tx_mode) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num)); + /* TX specific MTL mode settings */ + if (tx_mode == SXGBE_MTL_SFMODE) { + reg_val |= SXGBE_MTL_SFMODE; + } else { + /* set the TTC values */ + if (tx_mode <= 64) + reg_val |= MTL_CONTROL_TTC_64; + else if (tx_mode <= 96) + reg_val |= MTL_CONTROL_TTC_96; + else if (tx_mode <= 128) + reg_val |= MTL_CONTROL_TTC_128; + else if (tx_mode <= 192) + reg_val |= MTL_CONTROL_TTC_192; + else if (tx_mode <= 256) + reg_val |= MTL_CONTROL_TTC_256; + else if (tx_mode <= 384) + reg_val |= MTL_CONTROL_TTC_384; + else + reg_val |= MTL_CONTROL_TTC_512; + } + + /* write into TXQ operation register */ + writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num)); +} + +static void sxgbe_set_rx_mtl_mode(void __iomem *ioaddr, int queue_num, + int rx_mode) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); + /* RX specific MTL mode settings */ + if (rx_mode == SXGBE_RX_MTL_SFMODE) { + reg_val |= SXGBE_RX_MTL_SFMODE; + } else { + if (rx_mode <= 64) + reg_val |= MTL_CONTROL_RTC_64; + else if (rx_mode <= 96) + reg_val |= MTL_CONTROL_RTC_96; + else if (rx_mode <= 128) + reg_val |= MTL_CONTROL_RTC_128; + } + + /* write into RXQ operation register */ + writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num)); +} + +static const struct sxgbe_mtl_ops mtl_ops = { + .mtl_set_txfifosize = sxgbe_mtl_set_txfifosize, + .mtl_set_rxfifosize = sxgbe_mtl_set_rxfifosize, + .mtl_enable_txqueue = sxgbe_mtl_enable_txqueue, + .mtl_disable_txqueue = sxgbe_mtl_disable_txqueue, + .mtl_dynamic_dma_rxqueue = sxgbe_mtl_dma_dm_rxqueue, + .set_tx_mtl_mode = sxgbe_set_tx_mtl_mode, + .set_rx_mtl_mode = sxgbe_set_rx_mtl_mode, + .mtl_init = sxgbe_mtl_init, + .mtl_fc_active = sxgbe_mtl_fc_active, + .mtl_fc_deactive = sxgbe_mtl_fc_deactive, + .mtl_fc_enable = sxgbe_mtl_fc_enable, + .mtl_fep_enable = sxgbe_mtl_fep_enable, + .mtl_fep_disable = sxgbe_mtl_fep_disable, + .mtl_fup_enable = sxgbe_mtl_fup_enable, + .mtl_fup_disable = sxgbe_mtl_fup_disable +}; + +const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void) +{ + return &mtl_ops; +} diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h new file mode 100644 index 0000000..7e4810c --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h @@ -0,0 +1,104 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __SXGBE_MTL_H__ +#define __SXGBE_MTL_H__ + +#define SXGBE_MTL_OPMODE_ESTMASK 0x3 +#define SXGBE_MTL_OPMODE_RAAMASK 0x1 +#define SXGBE_MTL_FCMASK 0x7 +#define SXGBE_MTL_TX_FIFO_DIV 256 +#define SXGBE_MTL_RX_FIFO_DIV 256 + +#define SXGBE_MTL_RXQ_OP_FEP BIT(4) +#define SXGBE_MTL_RXQ_OP_FUP BIT(3) +#define SXGBE_MTL_ENABLE_FC 0x80 + +#define ETS_WRR 0xFFFFFF9F +#define ETS_RST 0xFFFFFF9F +#define ETS_WFQ 0x00000020 +#define ETS_DWRR 0x00000040 +#define RAA_SP 0xFFFFFFFB +#define RAA_WSP 0x00000004 + +#define RX_QUEUE_DYNAMIC 0x80808080 +#define RX_FC_ACTIVE 8 +#define RX_FC_DEACTIVE 13 + +enum ttc_control { + MTL_CONTROL_TTC_64 = 0x00000000, + MTL_CONTROL_TTC_96 = 0x00000020, + MTL_CONTROL_TTC_128 = 0x00000030, + MTL_CONTROL_TTC_192 = 0x00000040, + MTL_CONTROL_TTC_256 = 0x00000050, + MTL_CONTROL_TTC_384 = 0x00000060, + MTL_CONTROL_TTC_512 = 0x00000070, +}; + +enum rtc_control { + MTL_CONTROL_RTC_64 = 0x00000000, + MTL_CONTROL_RTC_96 = 0x00000002, + MTL_CONTROL_RTC_128 = 0x00000003, +}; + +enum flow_control_th { + MTL_FC_FULL_1K = 0x00000000, + MTL_FC_FULL_2K = 0x00000001, + MTL_FC_FULL_4K = 0x00000002, + MTL_FC_FULL_5K = 0x00000003, + MTL_FC_FULL_6K = 0x00000004, + MTL_FC_FULL_8K = 0x00000005, + MTL_FC_FULL_16K = 0x00000006, + MTL_FC_FULL_24K = 0x00000007, +}; + +struct sxgbe_mtl_ops { + void (*mtl_init)(void __iomem *ioaddr, unsigned int etsalg, + unsigned int raa); + + void (*mtl_set_txfifosize)(void __iomem *ioaddr, int queue_num, + int mtl_fifo); + + void (*mtl_set_rxfifosize)(void __iomem *ioaddr, int queue_num, + int queue_fifo); + + void (*mtl_enable_txqueue)(void __iomem *ioaddr, int queue_num); + + void (*mtl_disable_txqueue)(void __iomem *ioaddr, int queue_num); + + void (*set_tx_mtl_mode)(void __iomem *ioaddr, int queue_num, + int tx_mode); + + void (*set_rx_mtl_mode)(void __iomem *ioaddr, int queue_num, + int rx_mode); + + void (*mtl_dynamic_dma_rxqueue)(void __iomem *ioaddr); + + void (*mtl_fc_active)(void __iomem *ioaddr, int queue_num, + int threshold); + + void (*mtl_fc_deactive)(void __iomem *ioaddr, int queue_num, + int threshold); + + void (*mtl_fc_enable)(void __iomem *ioaddr, int queue_num); + + void (*mtl_fep_enable)(void __iomem *ioaddr, int queue_num); + + void (*mtl_fep_disable)(void __iomem *ioaddr, int queue_num); + + void (*mtl_fup_enable)(void __iomem *ioaddr, int queue_num); + + void (*mtl_fup_disable)(void __iomem *ioaddr, int queue_num); +}; + +const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void); + +#endif /* __SXGBE_MTL_H__ */ diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c new file mode 100644 index 0000000..e410d84 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c @@ -0,0 +1,258 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/etherdevice.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_net.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/sxgbe_platform.h> + +#include "sxgbe_common.h" +#include "sxgbe_reg.h" + +#ifdef CONFIG_OF +static int sxgbe_probe_config_dt(struct platform_device *pdev, + struct sxgbe_plat_data *plat, + const char **mac) +{ + struct device_node *np = pdev->dev.of_node; + struct sxgbe_dma_cfg *dma_cfg; + + if (!np) + return -ENODEV; + + *mac = of_get_mac_address(np); + plat->interface = of_get_phy_mode(np); + + plat->bus_id = of_alias_get_id(np, "ethernet"); + if (plat->bus_id < 0) + plat->bus_id = 0; + + plat->mdio_bus_data = devm_kzalloc(&pdev->dev, + sizeof(struct sxgbe_mdio_bus_data), + GFP_KERNEL); + + plat->force_sf_dma_mode = of_property_read_bool(np, + "samsung,force-sf-dma-mode"); + + dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg), GFP_KERNEL); + if (!dma_cfg) + return -ENOMEM; + + plat->dma_cfg = dma_cfg; + of_property_read_u32(np, "samsung,pbl", &dma_cfg->pbl); + if (of_property_read_u32(np, "samsung,burst-map", &dma_cfg->burst_map) == 0) + dma_cfg->fixed_burst = true; + + dma_cfg->adv_addr_mode = of_property_read_bool(np, + "samsung,adv-addr-mode"); + + plat->force_thresh_dma_mode = of_property_read_bool(np, + "samsung,force-thresh-dma-mode"); + if (plat->force_thresh_dma_mode) { + plat->force_sf_dma_mode = 0; + pr_warn("force-sf-dma-mode is ignored as force-thresh-dma-mode is set\n"); + } + + return 0; +} +#else +static int sxgbe_probe_config_dt(struct platform_device *pdev, + struct sxgbe_plat_data *plat, + const char **mac) +{ + return -ENOSYS; +} +#endif /* CONFIG_OF */ + +/** + * sxgbe_platform_probe + * @pdev: platform device pointer + * Description: platform_device probe function. It allocates + * the necessary resources and invokes the main to init + * the net device, register the mdio bus etc. + */ +static int sxgbe_platform_probe(struct platform_device *pdev) +{ + int ret = 0; + int loop = 0; + int index1, index2; + struct resource *res; + struct device *dev = &pdev->dev; + void __iomem *addr = NULL; + struct sxgbe_priv_data *priv = NULL; + struct sxgbe_plat_data *plat_dat = NULL; + const char *mac = NULL; + int total_dma_channels = SXGBE_TX_QUEUES + SXGBE_RX_QUEUES; + + /* Get memory resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + addr = devm_ioremap_resource(dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + + if (pdev->dev.of_node) { + plat_dat = devm_kzalloc(&pdev->dev, + sizeof(struct sxgbe_plat_data), + GFP_KERNEL); + if (!plat_dat) + return -ENOMEM; + + ret = sxgbe_probe_config_dt(pdev, plat_dat, &mac); + if (ret) { + pr_err("%s: main dt probe failed\n", __func__); + return ret; + } + } + + priv = sxgbe_dvr_probe(&(pdev->dev), plat_dat, addr); + if (!priv) { + pr_err("%s: main driver probe failed\n", __func__); + return -ENODEV; + } + + /* Get MAC address if available (DT) */ + if (mac) + ether_addr_copy(priv->dev->dev_addr, mac); + + /* Get the SXGBE common INT information */ + priv->irq = irq_of_parse_and_map(dev->of_node, loop++); + if (priv->irq <= 0) { + dev_err(dev, "sxgbe common irq parsing failed\n"); + return -EINVAL; + } + + /* Get the TX/RX IRQ numbers */ + for (index1 = 0, index2 = 0 ; loop < total_dma_channels; loop++) { + if (loop < SXGBE_TX_QUEUES) { + (priv->txq[index1])->irq_no = + irq_of_parse_and_map(dev->of_node, loop); + if ((priv->txq[index1++])->irq_no <= 0) { + dev_err(dev, "sxgbe tx irq parsing failed\n"); + return -EINVAL; + } + } else { + (priv->rxq[index2])->irq_no = + irq_of_parse_and_map(dev->of_node, loop); + if ((priv->rxq[index2++])->irq_no <= 0) { + dev_err(dev, "sxgbe rx irq parsing failed\n"); + return -EINVAL; + } + } + } + + platform_set_drvdata(pdev, priv->dev); + + pr_debug("platform driver registration completed\n"); + + return 0; +} + +/** + * sxgbe_platform_remove + * @pdev: platform device pointer + * Description: this function calls the main to free the net resources + * and calls the platforms hook and release the resources (e.g. mem). + */ +static int sxgbe_platform_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + int ret = sxgbe_dvr_remove(ndev); + + return ret; +} + +#ifdef CONFIG_PM +static int sxgbe_platform_suspend(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + + return sxgbe_suspend(ndev); +} + +static int sxgbe_platform_resume(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + + return sxgbe_resume(ndev); +} + +int sxgbe_platform_freeze(struct device *dev) +{ + int ret; + struct net_device *ndev = dev_get_drvdata(dev); + + ret = sxgbe_freeze(ndev); + + return ret; +} + +int sxgbe_platform_restore(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + + return sxgbe_restore(ndev); +} + +static const struct dev_pm_ops sxgbe_platform_pm_ops = { + .suspend = sxgbe_platform_suspend, + .resume = sxgbe_platform_resume, + .freeze = sxgbe_platform_freeze, + .thaw = sxgbe_platform_restore, + .restore = sxgbe_platform_restore, +}; +#else +static const struct dev_pm_ops sxgbe_platform_pm_ops; +#endif /* CONFIG_PM */ + +static const struct of_device_id sxgbe_dt_ids[] = { + { .compatible = "samsung,sxgbe-v2.0a"}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sxgbe_dt_ids); + +struct platform_driver sxgbe_platform_driver = { + .probe = sxgbe_platform_probe, + .remove = sxgbe_platform_remove, + .driver = { + .name = SXGBE_RESOURCE_NAME, + .owner = THIS_MODULE, + .pm = &sxgbe_platform_pm_ops, + .of_match_table = of_match_ptr(sxgbe_dt_ids), + }, +}; + +int sxgbe_register_platform(void) +{ + int err; + + err = platform_driver_register(&sxgbe_platform_driver); + if (err) + pr_err("failed to register the platform driver\n"); + + return err; +} + +void sxgbe_unregister_platform(void) +{ + platform_driver_unregister(&sxgbe_platform_driver); +} diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h new file mode 100644 index 0000000..d1cd9ac --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h @@ -0,0 +1,477 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __SXGBE_REGMAP_H__ +#define __SXGBE_REGMAP_H__ + +/* SXGBE MAC Registers */ +#define SXGBE_CORE_TX_CONFIG_REG 0x0000 +#define SXGBE_CORE_RX_CONFIG_REG 0x0004 +#define SXGBE_CORE_PKT_FILTER_REG 0x0008 +#define SXGBE_CORE_WATCHDOG_TIMEOUT_REG 0x000C +#define SXGBE_CORE_HASH_TABLE_REG0 0x0010 +#define SXGBE_CORE_HASH_TABLE_REG1 0x0014 +#define SXGBE_CORE_HASH_TABLE_REG2 0x0018 +#define SXGBE_CORE_HASH_TABLE_REG3 0x001C +#define SXGBE_CORE_HASH_TABLE_REG4 0x0020 +#define SXGBE_CORE_HASH_TABLE_REG5 0x0024 +#define SXGBE_CORE_HASH_TABLE_REG6 0x0028 +#define SXGBE_CORE_HASH_TABLE_REG7 0x002C +/* VLAN Specific Registers */ +#define SXGBE_CORE_VLAN_TAG_REG 0x0050 +#define SXGBE_CORE_VLAN_HASHTAB_REG 0x0058 +#define SXGBE_CORE_VLAN_INSCTL_REG 0x0060 +#define SXGBE_CORE_VLAN_INNERCTL_REG 0x0064 +#define SXGBE_CORE_RX_ETHTYPE_MATCH_REG 0x006C + +/* Flow Contol Registers */ +#define SXGBE_CORE_TX_Q0_FLOWCTL_REG 0x0070 +#define SXGBE_CORE_TX_Q1_FLOWCTL_REG 0x0074 +#define SXGBE_CORE_TX_Q2_FLOWCTL_REG 0x0078 +#define SXGBE_CORE_TX_Q3_FLOWCTL_REG 0x007C +#define SXGBE_CORE_TX_Q4_FLOWCTL_REG 0x0080 +#define SXGBE_CORE_TX_Q5_FLOWCTL_REG 0x0084 +#define SXGBE_CORE_TX_Q6_FLOWCTL_REG 0x0088 +#define SXGBE_CORE_TX_Q7_FLOWCTL_REG 0x008C +#define SXGBE_CORE_RX_FLOWCTL_REG 0x0090 +#define SXGBE_CORE_RX_CTL0_REG 0x00A0 +#define SXGBE_CORE_RX_CTL1_REG 0x00A4 +#define SXGBE_CORE_RX_CTL2_REG 0x00A8 +#define SXGBE_CORE_RX_CTL3_REG 0x00AC + +/* Interrupt Registers */ +#define SXGBE_CORE_INT_STATUS_REG 0x00B0 +#define SXGBE_CORE_INT_ENABLE_REG 0x00B4 +#define SXGBE_CORE_RXTX_ERR_STATUS_REG 0x00B8 +#define SXGBE_CORE_PMT_CTL_STATUS_REG 0x00C0 +#define SXGBE_CORE_RWK_PKT_FILTER_REG 0x00C4 +#define SXGBE_CORE_VERSION_REG 0x0110 +#define SXGBE_CORE_DEBUG_REG 0x0114 +#define SXGBE_CORE_HW_FEA_REG(index) (0x011C + index * 4) + +/* SMA(MDIO) module registers */ +#define SXGBE_MDIO_SCMD_ADD_REG 0x0200 +#define SXGBE_MDIO_SCMD_DATA_REG 0x0204 +#define SXGBE_MDIO_CCMD_WADD_REG 0x0208 +#define SXGBE_MDIO_CCMD_WDATA_REG 0x020C +#define SXGBE_MDIO_CSCAN_PORT_REG 0x0210 +#define SXGBE_MDIO_INT_STATUS_REG 0x0214 +#define SXGBE_MDIO_INT_ENABLE_REG 0x0218 +#define SXGBE_MDIO_PORT_CONDCON_REG 0x021C +#define SXGBE_MDIO_CLAUSE22_PORT_REG 0x0220 + +/* port specific, addr = 0-3 */ +#define SXGBE_MDIO_DEV_BASE_REG 0x0230 +#define SXGBE_MDIO_PORT_DEV_REG(addr) \ + (SXGBE_MDIO_DEV_BASE_REG + (0x10 * addr) + 0x0) +#define SXGBE_MDIO_PORT_LSTATUS_REG(addr) \ + (SXGBE_MDIO_DEV_BASE_REG + (0x10 * addr) + 0x4) +#define SXGBE_MDIO_PORT_ALIVE_REG(addr) \ + (SXGBE_MDIO_DEV_BASE_REG + (0x10 * addr) + 0x8) + +#define SXGBE_CORE_GPIO_CTL_REG 0x0278 +#define SXGBE_CORE_GPIO_STATUS_REG 0x027C + +/* Address registers for filtering */ +#define SXGBE_CORE_ADD_BASE_REG 0x0300 + +/* addr = 0-31 */ +#define SXGBE_CORE_ADD_HIGHOFFSET(addr) \ + (SXGBE_CORE_ADD_BASE_REG + (0x8 * addr) + 0x0) +#define SXGBE_CORE_ADD_LOWOFFSET(addr) \ + (SXGBE_CORE_ADD_BASE_REG + (0x8 * addr) + 0x4) + +/* SXGBE MMC registers */ +#define SXGBE_MMC_CTL_REG 0x0800 +#define SXGBE_MMC_RXINT_STATUS_REG 0x0804 +#define SXGBE_MMC_TXINT_STATUS_REG 0x0808 +#define SXGBE_MMC_RXINT_ENABLE_REG 0x080C +#define SXGBE_MMC_TXINT_ENABLE_REG 0x0810 + +/* TX specific counters */ +#define SXGBE_MMC_TXOCTETHI_GBCNT_REG 0x0814 +#define SXGBE_MMC_TXOCTETLO_GBCNT_REG 0x0818 +#define SXGBE_MMC_TXFRAMELO_GBCNT_REG 0x081C +#define SXGBE_MMC_TXFRAMEHI_GBCNT_REG 0x0820 +#define SXGBE_MMC_TXBROADLO_GCNT_REG 0x0824 +#define SXGBE_MMC_TXBROADHI_GCNT_REG 0x0828 +#define SXGBE_MMC_TXMULTILO_GCNT_REG 0x082C +#define SXGBE_MMC_TXMULTIHI_GCNT_REG 0x0830 +#define SXGBE_MMC_TX64LO_GBCNT_REG 0x0834 +#define SXGBE_MMC_TX64HI_GBCNT_REG 0x0838 +#define SXGBE_MMC_TX65TO127LO_GBCNT_REG 0x083C +#define SXGBE_MMC_TX65TO127HI_GBCNT_REG 0x0840 +#define SXGBE_MMC_TX128TO255LO_GBCNT_REG 0x0844 +#define SXGBE_MMC_TX128TO255HI_GBCNT_REG 0x0848 +#define SXGBE_MMC_TX256TO511LO_GBCNT_REG 0x084C +#define SXGBE_MMC_TX256TO511HI_GBCNT_REG 0x0850 +#define SXGBE_MMC_TX512TO1023LO_GBCNT_REG 0x0854 +#define SXGBE_MMC_TX512TO1023HI_GBCNT_REG 0x0858 +#define SXGBE_MMC_TX1023TOMAXLO_GBCNT_REG 0x085C +#define SXGBE_MMC_TX1023TOMAXHI_GBCNT_REG 0x0860 +#define SXGBE_MMC_TXUNICASTLO_GBCNT_REG 0x0864 +#define SXGBE_MMC_TXUNICASTHI_GBCNT_REG 0x0868 +#define SXGBE_MMC_TXMULTILO_GBCNT_REG 0x086C +#define SXGBE_MMC_TXMULTIHI_GBCNT_REG 0x0870 +#define SXGBE_MMC_TXBROADLO_GBCNT_REG 0x0874 +#define SXGBE_MMC_TXBROADHI_GBCNT_REG 0x0878 +#define SXGBE_MMC_TXUFLWLO_GBCNT_REG 0x087C +#define SXGBE_MMC_TXUFLWHI_GBCNT_REG 0x0880 +#define SXGBE_MMC_TXOCTETLO_GCNT_REG 0x0884 +#define SXGBE_MMC_TXOCTETHI_GCNT_REG 0x0888 +#define SXGBE_MMC_TXFRAMELO_GCNT_REG 0x088C +#define SXGBE_MMC_TXFRAMEHI_GCNT_REG 0x0890 +#define SXGBE_MMC_TXPAUSELO_CNT_REG 0x0894 +#define SXGBE_MMC_TXPAUSEHI_CNT_REG 0x0898 +#define SXGBE_MMC_TXVLANLO_GCNT_REG 0x089C +#define SXGBE_MMC_TXVLANHI_GCNT_REG 0x08A0 + +/* RX specific counters */ +#define SXGBE_MMC_RXFRAMELO_GBCNT_REG 0x0900 +#define SXGBE_MMC_RXFRAMEHI_GBCNT_REG 0x0904 +#define SXGBE_MMC_RXOCTETLO_GBCNT_REG 0x0908 +#define SXGBE_MMC_RXOCTETHI_GBCNT_REG 0x090C +#define SXGBE_MMC_RXOCTETLO_GCNT_REG 0x0910 +#define SXGBE_MMC_RXOCTETHI_GCNT_REG 0x0914 +#define SXGBE_MMC_RXBROADLO_GCNT_REG 0x0918 +#define SXGBE_MMC_RXBROADHI_GCNT_REG 0x091C +#define SXGBE_MMC_RXMULTILO_GCNT_REG 0x0920 +#define SXGBE_MMC_RXMULTIHI_GCNT_REG 0x0924 +#define SXGBE_MMC_RXCRCERRLO_REG 0x0928 +#define SXGBE_MMC_RXCRCERRHI_REG 0x092C +#define SXGBE_MMC_RXSHORT64BFRAME_ERR_REG 0x0930 +#define SXGBE_MMC_RXJABBERERR_REG 0x0934 +#define SXGBE_MMC_RXSHORT64BFRAME_COR_REG 0x0938 +#define SXGBE_MMC_RXOVERMAXFRAME_COR_REG 0x093C +#define SXGBE_MMC_RX64LO_GBCNT_REG 0x0940 +#define SXGBE_MMC_RX64HI_GBCNT_REG 0x0944 +#define SXGBE_MMC_RX65TO127LO_GBCNT_REG 0x0948 +#define SXGBE_MMC_RX65TO127HI_GBCNT_REG 0x094C +#define SXGBE_MMC_RX128TO255LO_GBCNT_REG 0x0950 +#define SXGBE_MMC_RX128TO255HI_GBCNT_REG 0x0954 +#define SXGBE_MMC_RX256TO511LO_GBCNT_REG 0x0958 +#define SXGBE_MMC_RX256TO511HI_GBCNT_REG 0x095C +#define SXGBE_MMC_RX512TO1023LO_GBCNT_REG 0x0960 +#define SXGBE_MMC_RX512TO1023HI_GBCNT_REG 0x0964 +#define SXGBE_MMC_RX1023TOMAXLO_GBCNT_REG 0x0968 +#define SXGBE_MMC_RX1023TOMAXHI_GBCNT_REG 0x096C +#define SXGBE_MMC_RXUNICASTLO_GCNT_REG 0x0970 +#define SXGBE_MMC_RXUNICASTHI_GCNT_REG 0x0974 +#define SXGBE_MMC_RXLENERRLO_REG 0x0978 +#define SXGBE_MMC_RXLENERRHI_REG 0x097C +#define SXGBE_MMC_RXOUTOFRANGETYPELO_REG 0x0980 +#define SXGBE_MMC_RXOUTOFRANGETYPEHI_REG 0x0984 +#define SXGBE_MMC_RXPAUSELO_CNT_REG 0x0988 +#define SXGBE_MMC_RXPAUSEHI_CNT_REG 0x098C +#define SXGBE_MMC_RXFIFOOVERFLOWLO_GBCNT_REG 0x0990 +#define SXGBE_MMC_RXFIFOOVERFLOWHI_GBCNT_REG 0x0994 +#define SXGBE_MMC_RXVLANLO_GBCNT_REG 0x0998 +#define SXGBE_MMC_RXVLANHI_GBCNT_REG 0x099C +#define SXGBE_MMC_RXWATCHDOG_ERR_REG 0x09A0 + +/* L3/L4 function registers */ +#define SXGBE_CORE_L34_ADDCTL_REG 0x0C00 +#define SXGBE_CORE_L34_ADDCTL_REG 0x0C00 +#define SXGBE_CORE_L34_DATA_REG 0x0C04 + +/* ARP registers */ +#define SXGBE_CORE_ARP_ADD_REG 0x0C10 + +/* RSS registers */ +#define SXGBE_CORE_RSS_CTL_REG 0x0C80 +#define SXGBE_CORE_RSS_ADD_REG 0x0C88 +#define SXGBE_CORE_RSS_DATA_REG 0x0C8C + +/* IEEE 1588 registers */ +#define SXGBE_CORE_TSTAMP_CTL_REG 0x0D00 +#define SXGBE_CORE_SUBSEC_INC_REG 0x0D04 +#define SXGBE_CORE_SYSTIME_SEC_REG 0x0D0C +#define SXGBE_CORE_SYSTIME_NSEC_REG 0x0D10 +#define SXGBE_CORE_SYSTIME_SECUP_REG 0x0D14 +#define SXGBE_CORE_TSTAMP_ADD_REG 0x0D18 +#define SXGBE_CORE_SYSTIME_HWORD_REG 0x0D1C +#define SXGBE_CORE_TSTAMP_STATUS_REG 0x0D20 +#define SXGBE_CORE_TXTIME_STATUSNSEC_REG 0x0D30 +#define SXGBE_CORE_TXTIME_STATUSSEC_REG 0x0D34 + +/* Auxiliary registers */ +#define SXGBE_CORE_AUX_CTL_REG 0x0D40 +#define SXGBE_CORE_AUX_TSTAMP_NSEC_REG 0x0D48 +#define SXGBE_CORE_AUX_TSTAMP_SEC_REG 0x0D4C +#define SXGBE_CORE_AUX_TSTAMP_INGCOR_REG 0x0D50 +#define SXGBE_CORE_AUX_TSTAMP_ENGCOR_REG 0x0D54 +#define SXGBE_CORE_AUX_TSTAMP_INGCOR_NSEC_REG 0x0D58 +#define SXGBE_CORE_AUX_TSTAMP_INGCOR_SUBNSEC_REG 0x0D5C +#define SXGBE_CORE_AUX_TSTAMP_ENGCOR_NSEC_REG 0x0D60 +#define SXGBE_CORE_AUX_TSTAMP_ENGCOR_SUBNSEC_REG 0x0D64 + +/* PPS registers */ +#define SXGBE_CORE_PPS_CTL_REG 0x0D70 +#define SXGBE_CORE_PPS_BASE 0x0D80 + +/* addr = 0 - 3 */ +#define SXGBE_CORE_PPS_TTIME_SEC_REG(addr) \ + (SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0x0) +#define SXGBE_CORE_PPS_TTIME_NSEC_REG(addr) \ + (SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0x4) +#define SXGBE_CORE_PPS_INTERVAL_REG(addr) \ + (SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0x8) +#define SXGBE_CORE_PPS_WIDTH_REG(addr) \ + (SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0xC) +#define SXGBE_CORE_PTO_CTL_REG 0x0DC0 +#define SXGBE_CORE_SRCPORT_ITY0_REG 0x0DC4 +#define SXGBE_CORE_SRCPORT_ITY1_REG 0x0DC8 +#define SXGBE_CORE_SRCPORT_ITY2_REG 0x0DCC +#define SXGBE_CORE_LOGMSG_LEVEL_REG 0x0DD0 + +/* SXGBE MTL Registers */ +#define SXGBE_MTL_BASE_REG 0x1000 +#define SXGBE_MTL_OP_MODE_REG (SXGBE_MTL_BASE_REG + 0x0000) +#define SXGBE_MTL_DEBUG_CTL_REG (SXGBE_MTL_BASE_REG + 0x0008) +#define SXGBE_MTL_DEBUG_STATUS_REG (SXGBE_MTL_BASE_REG + 0x000C) +#define SXGBE_MTL_FIFO_DEBUGDATA_REG (SXGBE_MTL_BASE_REG + 0x0010) +#define SXGBE_MTL_INT_STATUS_REG (SXGBE_MTL_BASE_REG + 0x0020) +#define SXGBE_MTL_RXQ_DMAMAP0_REG (SXGBE_MTL_BASE_REG + 0x0030) +#define SXGBE_MTL_RXQ_DMAMAP1_REG (SXGBE_MTL_BASE_REG + 0x0034) +#define SXGBE_MTL_RXQ_DMAMAP2_REG (SXGBE_MTL_BASE_REG + 0x0038) +#define SXGBE_MTL_TX_PRTYMAP0_REG (SXGBE_MTL_BASE_REG + 0x0040) +#define SXGBE_MTL_TX_PRTYMAP1_REG (SXGBE_MTL_BASE_REG + 0x0044) + +/* TC/Queue registers, qnum=0-15 */ +#define SXGBE_MTL_TC_TXBASE_REG (SXGBE_MTL_BASE_REG + 0x0100) +#define SXGBE_MTL_TXQ_OPMODE_REG(qnum) \ + (SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x00) +#define SXGBE_MTL_SFMODE BIT(1) +#define SXGBE_MTL_FIFO_LSHIFT 16 +#define SXGBE_MTL_ENABLE_QUEUE 0x00000008 +#define SXGBE_MTL_TXQ_UNDERFLOW_REG(qnum) \ + (SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x04) +#define SXGBE_MTL_TXQ_DEBUG_REG(qnum) \ + (SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x08) +#define SXGBE_MTL_TXQ_ETSCTL_REG(qnum) \ + (SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x10) +#define SXGBE_MTL_TXQ_ETSSTATUS_REG(qnum) \ + (SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x14) +#define SXGBE_MTL_TXQ_QUANTWEIGHT_REG(qnum) \ + (SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x18) + +#define SXGBE_MTL_TC_RXBASE_REG 0x1140 +#define SXGBE_RX_MTL_SFMODE BIT(5) +#define SXGBE_MTL_RXQ_OPMODE_REG(qnum) \ + (SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x00) +#define SXGBE_MTL_RXQ_MISPKTOVERFLOW_REG(qnum) \ + (SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x04) +#define SXGBE_MTL_RXQ_DEBUG_REG(qnum) \ + (SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x08) +#define SXGBE_MTL_RXQ_CTL_REG(qnum) \ + (SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x0C) +#define SXGBE_MTL_RXQ_INTENABLE_REG(qnum) \ + (SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x30) +#define SXGBE_MTL_RXQ_INTSTATUS_REG(qnum) \ + (SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x34) + +/* SXGBE DMA Registers */ +#define SXGBE_DMA_BASE_REG 0x3000 +#define SXGBE_DMA_MODE_REG (SXGBE_DMA_BASE_REG + 0x0000) +#define SXGBE_DMA_SOFT_RESET BIT(0) +#define SXGBE_DMA_SYSBUS_MODE_REG (SXGBE_DMA_BASE_REG + 0x0004) +#define SXGBE_DMA_AXI_UNDEF_BURST BIT(0) +#define SXGBE_DMA_ENHACE_ADDR_MODE BIT(11) +#define SXGBE_DMA_INT_STATUS_REG (SXGBE_DMA_BASE_REG + 0x0008) +#define SXGBE_DMA_AXI_ARCACHECTL_REG (SXGBE_DMA_BASE_REG + 0x0010) +#define SXGBE_DMA_AXI_AWCACHECTL_REG (SXGBE_DMA_BASE_REG + 0x0018) +#define SXGBE_DMA_DEBUG_STATUS0_REG (SXGBE_DMA_BASE_REG + 0x0020) +#define SXGBE_DMA_DEBUG_STATUS1_REG (SXGBE_DMA_BASE_REG + 0x0024) +#define SXGBE_DMA_DEBUG_STATUS2_REG (SXGBE_DMA_BASE_REG + 0x0028) +#define SXGBE_DMA_DEBUG_STATUS3_REG (SXGBE_DMA_BASE_REG + 0x002C) +#define SXGBE_DMA_DEBUG_STATUS4_REG (SXGBE_DMA_BASE_REG + 0x0030) +#define SXGBE_DMA_DEBUG_STATUS5_REG (SXGBE_DMA_BASE_REG + 0x0034) + +/* Channel Registers, cha_num = 0-15 */ +#define SXGBE_DMA_CHA_BASE_REG \ + (SXGBE_DMA_BASE_REG + 0x0100) +#define SXGBE_DMA_CHA_CTL_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x00) +#define SXGBE_DMA_PBL_X8MODE BIT(16) +#define SXGBE_DMA_CHA_TXCTL_TSE_ENABLE BIT(12) +#define SXGBE_DMA_CHA_TXCTL_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x04) +#define SXGBE_DMA_CHA_RXCTL_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x08) +#define SXGBE_DMA_CHA_TXDESC_HADD_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x10) +#define SXGBE_DMA_CHA_TXDESC_LADD_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x14) +#define SXGBE_DMA_CHA_RXDESC_HADD_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x18) +#define SXGBE_DMA_CHA_RXDESC_LADD_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x1C) +#define SXGBE_DMA_CHA_TXDESC_TAILPTR_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x24) +#define SXGBE_DMA_CHA_RXDESC_TAILPTR_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x2C) +#define SXGBE_DMA_CHA_TXDESC_RINGLEN_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x30) +#define SXGBE_DMA_CHA_RXDESC_RINGLEN_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x34) +#define SXGBE_DMA_CHA_INT_ENABLE_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x38) +#define SXGBE_DMA_CHA_INT_RXWATCHTMR_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x3C) +#define SXGBE_DMA_CHA_TXDESC_CURADDLO_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x44) +#define SXGBE_DMA_CHA_RXDESC_CURADDLO_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x4C) +#define SXGBE_DMA_CHA_CURTXBUF_ADDHI_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x50) +#define SXGBE_DMA_CHA_CURTXBUF_ADDLO_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x54) +#define SXGBE_DMA_CHA_CURRXBUF_ADDHI_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x58) +#define SXGBE_DMA_CHA_CURRXBUF_ADDLO_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x5C) +#define SXGBE_DMA_CHA_STATUS_REG(cha_num) \ + (SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x60) + +/* TX DMA control register specific */ +#define SXGBE_TX_START_DMA BIT(0) + +/* sxgbe tx configuration register bitfields */ +#define SXGBE_SPEED_10G 0x0 +#define SXGBE_SPEED_2_5G 0x1 +#define SXGBE_SPEED_1G 0x2 +#define SXGBE_SPEED_LSHIFT 29 + +#define SXGBE_TX_ENABLE BIT(0) +#define SXGBE_TX_DISDIC_ALGO BIT(1) +#define SXGBE_TX_JABBER_DISABLE BIT(16) + +/* sxgbe rx configuration register bitfields */ +#define SXGBE_RX_ENABLE BIT(0) +#define SXGBE_RX_ACS_ENABLE BIT(1) +#define SXGBE_RX_WATCHDOG_DISABLE BIT(7) +#define SXGBE_RX_JUMBPKT_ENABLE BIT(8) +#define SXGBE_RX_CSUMOFFLOAD_ENABLE BIT(9) +#define SXGBE_RX_LOOPBACK_ENABLE BIT(10) +#define SXGBE_RX_ARPOFFLOAD_ENABLE BIT(31) + +/* sxgbe vlan Tag Register bitfields */ +#define SXGBE_VLAN_SVLAN_ENABLE BIT(18) +#define SXGBE_VLAN_DOUBLEVLAN_ENABLE BIT(26) +#define SXGBE_VLAN_INNERVLAN_ENABLE BIT(27) + +/* XMAC VLAN Tag Inclusion Register(0x0060) bitfields + * Below fields same for Inner VLAN Tag Inclusion + * Register(0x0064) register + */ +enum vlan_tag_ctl_tx { + VLAN_TAG_TX_NOP, + VLAN_TAG_TX_DEL, + VLAN_TAG_TX_INSERT, + VLAN_TAG_TX_REPLACE +}; +#define SXGBE_VLAN_PRTY_CTL BIT(18) +#define SXGBE_VLAN_CSVL_CTL BIT(19) + +/* SXGBE TX Q Flow Control Register bitfields */ +#define SXGBE_TX_FLOW_CTL_FCB BIT(0) +#define SXGBE_TX_FLOW_CTL_TFB BIT(1) + +/* SXGBE RX Q Flow Control Register bitfields */ +#define SXGBE_RX_FLOW_CTL_ENABLE BIT(0) +#define SXGBE_RX_UNICAST_DETECT BIT(1) +#define SXGBE_RX_PRTYFLOW_CTL_ENABLE BIT(8) + +/* sxgbe rx Q control0 register bitfields */ +#define SXGBE_RX_Q_ENABLE 0x2 + +/* SXGBE hardware features bitfield specific */ +/* Capability Register 0 */ +#define SXGBE_HW_FEAT_GMII(cap) ((cap & 0x00000002) >> 1) +#define SXGBE_HW_FEAT_VLAN_HASH_FILTER(cap) ((cap & 0x00000010) >> 4) +#define SXGBE_HW_FEAT_SMA(cap) ((cap & 0x00000020) >> 5) +#define SXGBE_HW_FEAT_PMT_TEMOTE_WOP(cap) ((cap & 0x00000040) >> 6) +#define SXGBE_HW_FEAT_PMT_MAGIC_PKT(cap) ((cap & 0x00000080) >> 7) +#define SXGBE_HW_FEAT_RMON(cap) ((cap & 0x00000100) >> 8) +#define SXGBE_HW_FEAT_ARP_OFFLOAD(cap) ((cap & 0x00000200) >> 9) +#define SXGBE_HW_FEAT_IEEE1500_2008(cap) ((cap & 0x00001000) >> 12) +#define SXGBE_HW_FEAT_EEE(cap) ((cap & 0x00002000) >> 13) +#define SXGBE_HW_FEAT_TX_CSUM_OFFLOAD(cap) ((cap & 0x00004000) >> 14) +#define SXGBE_HW_FEAT_RX_CSUM_OFFLOAD(cap) ((cap & 0x00010000) >> 16) +#define SXGBE_HW_FEAT_MACADDR_COUNT(cap) ((cap & 0x007C0000) >> 18) +#define SXGBE_HW_FEAT_TSTMAP_SRC(cap) ((cap & 0x06000000) >> 25) +#define SXGBE_HW_FEAT_SRCADDR_VLAN(cap) ((cap & 0x08000000) >> 27) + +/* Capability Register 1 */ +#define SXGBE_HW_FEAT_RX_FIFO_SIZE(cap) ((cap & 0x0000001F)) +#define SXGBE_HW_FEAT_TX_FIFO_SIZE(cap) ((cap & 0x000007C0) >> 6) +#define SXGBE_HW_FEAT_IEEE1588_HWORD(cap) ((cap & 0x00002000) >> 13) +#define SXGBE_HW_FEAT_DCB(cap) ((cap & 0x00010000) >> 16) +#define SXGBE_HW_FEAT_SPLIT_HDR(cap) ((cap & 0x00020000) >> 17) +#define SXGBE_HW_FEAT_TSO(cap) ((cap & 0x00040000) >> 18) +#define SXGBE_HW_FEAT_DEBUG_MEM_IFACE(cap) ((cap & 0x00080000) >> 19) +#define SXGBE_HW_FEAT_RSS(cap) ((cap & 0x00100000) >> 20) +#define SXGBE_HW_FEAT_HASH_TABLE_SIZE(cap) ((cap & 0x03000000) >> 24) +#define SXGBE_HW_FEAT_L3L4_FILTER_NUM(cap) ((cap & 0x78000000) >> 27) + +/* Capability Register 2 */ +#define SXGBE_HW_FEAT_RX_MTL_QUEUES(cap) ((cap & 0x0000000F)) +#define SXGBE_HW_FEAT_TX_MTL_QUEUES(cap) ((cap & 0x000003C0) >> 6) +#define SXGBE_HW_FEAT_RX_DMA_CHANNELS(cap) ((cap & 0x0000F000) >> 12) +#define SXGBE_HW_FEAT_TX_DMA_CHANNELS(cap) ((cap & 0x003C0000) >> 18) +#define SXGBE_HW_FEAT_PPS_OUTPUTS(cap) ((cap & 0x07000000) >> 24) +#define SXGBE_HW_FEAT_AUX_SNAPSHOTS(cap) ((cap & 0x70000000) >> 28) + +/* DMAchannel interrupt enable specific */ +/* DMA Normal interrupt */ +#define SXGBE_DMA_INT_ENA_NIE BIT(16) /* Normal Summary */ +#define SXGBE_DMA_INT_ENA_TIE BIT(0) /* Transmit Interrupt */ +#define SXGBE_DMA_INT_ENA_TUE BIT(2) /* Transmit Buffer Unavailable */ +#define SXGBE_DMA_INT_ENA_RIE BIT(6) /* Receive Interrupt */ + +#define SXGBE_DMA_INT_NORMAL \ + (SXGBE_DMA_INT_ENA_NIE | SXGBE_DMA_INT_ENA_RIE | \ + SXGBE_DMA_INT_ENA_TIE | SXGBE_DMA_INT_ENA_TUE) + +/* DMA Abnormal interrupt */ +#define SXGBE_DMA_INT_ENA_AIE BIT(15) /* Abnormal Summary */ +#define SXGBE_DMA_INT_ENA_TSE BIT(1) /* Transmit Stopped */ +#define SXGBE_DMA_INT_ENA_RUE BIT(7) /* Receive Buffer Unavailable */ +#define SXGBE_DMA_INT_ENA_RSE BIT(8) /* Receive Stopped */ +#define SXGBE_DMA_INT_ENA_FBE BIT(12) /* Fatal Bus Error */ +#define SXGBE_DMA_INT_ENA_CDEE BIT(13) /* Context Descriptor Error */ + +#define SXGBE_DMA_INT_ABNORMAL \ + (SXGBE_DMA_INT_ENA_AIE | SXGBE_DMA_INT_ENA_TSE | \ + SXGBE_DMA_INT_ENA_RUE | SXGBE_DMA_INT_ENA_RSE | \ + SXGBE_DMA_INT_ENA_FBE | SXGBE_DMA_INT_ENA_CDEE) + +#define SXGBE_DMA_ENA_INT (SXGBE_DMA_INT_NORMAL | SXGBE_DMA_INT_ABNORMAL) + +/* DMA channel interrupt status specific */ +#define SXGBE_DMA_INT_STATUS_REB2 BIT(21) +#define SXGBE_DMA_INT_STATUS_REB1 BIT(20) +#define SXGBE_DMA_INT_STATUS_REB0 BIT(19) +#define SXGBE_DMA_INT_STATUS_TEB2 BIT(18) +#define SXGBE_DMA_INT_STATUS_TEB1 BIT(17) +#define SXGBE_DMA_INT_STATUS_TEB0 BIT(16) +#define SXGBE_DMA_INT_STATUS_NIS BIT(15) +#define SXGBE_DMA_INT_STATUS_AIS BIT(14) +#define SXGBE_DMA_INT_STATUS_CTXTERR BIT(13) +#define SXGBE_DMA_INT_STATUS_FBE BIT(12) +#define SXGBE_DMA_INT_STATUS_RPS BIT(8) +#define SXGBE_DMA_INT_STATUS_RBU BIT(7) +#define SXGBE_DMA_INT_STATUS_RI BIT(6) +#define SXGBE_DMA_INT_STATUS_TBU BIT(2) +#define SXGBE_DMA_INT_STATUS_TPS BIT(1) +#define SXGBE_DMA_INT_STATUS_TI BIT(0) + +#endif /* __SXGBE_REGMAP_H__ */ diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c new file mode 100644 index 0000000..55eba99 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c @@ -0,0 +1,92 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/bitops.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include "sxgbe_common.h" +#include "sxgbe_xpcs.h" + +static int sxgbe_xpcs_read(struct net_device *ndev, unsigned int reg) +{ + u32 value; + struct sxgbe_priv_data *priv = netdev_priv(ndev); + + value = readl(priv->ioaddr + XPCS_OFFSET + reg); + + return value; +} + +static int sxgbe_xpcs_write(struct net_device *ndev, int reg, int data) +{ + struct sxgbe_priv_data *priv = netdev_priv(ndev); + + writel(data, priv->ioaddr + XPCS_OFFSET + reg); + + return 0; +} + +int sxgbe_xpcs_init(struct net_device *ndev) +{ + u32 value; + + value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1); + /* 10G XAUI mode */ + sxgbe_xpcs_write(ndev, SR_PCS_CONTROL2, XPCS_TYPE_SEL_X); + sxgbe_xpcs_write(ndev, VR_PCS_MMD_XAUI_MODE_CONTROL, XPCS_XAUI_MODE); + sxgbe_xpcs_write(ndev, VR_PCS_MMD_XAUI_MODE_CONTROL, value | BIT(13)); + sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value | BIT(11)); + + do { + value = sxgbe_xpcs_read(ndev, VR_PCS_MMD_DIGITAL_STATUS); + + } while ((value & XPCS_QSEQ_STATE_MPLLOFF) == XPCS_QSEQ_STATE_STABLE); + + value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1); + sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value & ~BIT(11)); + + do { + value = sxgbe_xpcs_read(ndev, VR_PCS_MMD_DIGITAL_STATUS); + } while ((value & XPCS_QSEQ_STATE_MPLLOFF) != XPCS_QSEQ_STATE_STABLE); + + return 0; +} + +int sxgbe_xpcs_init_1G(struct net_device *ndev) +{ + int value; + + /* 10GBASE-X PCS (1G) mode */ + sxgbe_xpcs_write(ndev, SR_PCS_CONTROL2, XPCS_TYPE_SEL_X); + sxgbe_xpcs_write(ndev, VR_PCS_MMD_XAUI_MODE_CONTROL, XPCS_XAUI_MODE); + value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1); + sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value & ~BIT(13)); + + value = sxgbe_xpcs_read(ndev, SR_MII_MMD_CONTROL); + sxgbe_xpcs_write(ndev, SR_MII_MMD_CONTROL, value | BIT(6)); + sxgbe_xpcs_write(ndev, SR_MII_MMD_CONTROL, value & ~BIT(13)); + value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1); + sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value | BIT(11)); + + do { + value = sxgbe_xpcs_read(ndev, VR_PCS_MMD_DIGITAL_STATUS); + } while ((value & XPCS_QSEQ_STATE_MPLLOFF) != XPCS_QSEQ_STATE_STABLE); + + value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1); + sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value & ~BIT(11)); + + /* Auto Negotiation cluase 37 enable */ + value = sxgbe_xpcs_read(ndev, SR_MII_MMD_CONTROL); + sxgbe_xpcs_write(ndev, SR_MII_MMD_CONTROL, value | BIT(12)); + + return 0; +} diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h new file mode 100644 index 0000000..6b26a50 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h @@ -0,0 +1,38 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Byungho An <bh74.an@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __SXGBE_XPCS_H__ +#define __SXGBE_XPCS_H__ + +/* XPCS Registers */ +#define XPCS_OFFSET 0x1A060000 +#define SR_PCS_MMD_CONTROL1 0x030000 +#define SR_PCS_CONTROL2 0x030007 +#define VR_PCS_MMD_XAUI_MODE_CONTROL 0x038004 +#define VR_PCS_MMD_DIGITAL_STATUS 0x038010 +#define SR_MII_MMD_CONTROL 0x1F0000 +#define SR_MII_MMD_AN_ADV 0x1F0004 +#define SR_MII_MMD_AN_LINK_PARTNER_BA 0x1F0005 +#define VR_MII_MMD_AN_CONTROL 0x1F8001 +#define VR_MII_MMD_AN_INT_STATUS 0x1F8002 + +#define XPCS_QSEQ_STATE_STABLE 0x10 +#define XPCS_QSEQ_STATE_MPLLOFF 0x1c +#define XPCS_TYPE_SEL_R 0x00 +#define XPCS_TYPE_SEL_X 0x01 +#define XPCS_TYPE_SEL_W 0x02 +#define XPCS_XAUI_MODE 0x00 +#define XPCS_RXAUI_MODE 0x01 + +int sxgbe_xpcs_init(struct net_device *ndev); +int sxgbe_xpcs_init_1G(struct net_device *ndev); + +#endif /* __SXGBE_XPCS_H__ */ diff --git a/include/linux/sxgbe_platform.h b/include/linux/sxgbe_platform.h new file mode 100644 index 0000000..a62442c --- /dev/null +++ b/include/linux/sxgbe_platform.h @@ -0,0 +1,54 @@ +/* + * 10G controller driver for Samsung EXYNOS SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __SXGBE_PLATFORM_H__ +#define __SXGBE_PLATFORM_H__ + +/* MDC Clock Selection define*/ +#define SXGBE_CSR_100_150M 0x0 /* MDC = clk_scr_i/62 */ +#define SXGBE_CSR_150_250M 0x1 /* MDC = clk_scr_i/102 */ +#define SXGBE_CSR_250_300M 0x2 /* MDC = clk_scr_i/122 */ +#define SXGBE_CSR_300_350M 0x3 /* MDC = clk_scr_i/142 */ +#define SXGBE_CSR_350_400M 0x4 /* MDC = clk_scr_i/162 */ +#define SXGBE_CSR_400_500M 0x5 /* MDC = clk_scr_i/202 */ + +/* Platfrom data for platform device structure's + * platform_data field + */ +struct sxgbe_mdio_bus_data { + unsigned int phy_mask; + int *irqs; + int probed_phy_irq; +}; + +struct sxgbe_dma_cfg { + int pbl; + int fixed_burst; + int burst_map; + int adv_addr_mode; +}; + +struct sxgbe_plat_data { + char *phy_bus_name; + int bus_id; + int phy_addr; + int interface; + struct sxgbe_mdio_bus_data *mdio_bus_data; + struct sxgbe_dma_cfg *dma_cfg; + int clk_csr; + int pmt; + int force_sf_dma_mode; + int force_thresh_dma_mode; + int riwt_off; +}; + +#endif /* __SXGBE_PLATFORM_H__ */ -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
