Add binding for Mediatek-based GNSS receivers.
Signed-off-by: Loys Ollivier <lollivier@xxxxxxxxxxxx>
---
v3:
Removed the I2C and SPI interfaces references.
Removed the "mediatek,mt3339" compatible line.
Added the optional propertied (reset, fix)
Added the pin names for the optional properties.
v2:
Renamed bindings from Globaltop/gtop to Mediatek/mtk.
Moved current-speed as an optional propertie.
Removed the status line in the example.
Added "mediatek,mt3339" compatible.
.../devicetree/bindings/gnss/mediatek.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gnss/mediatek.txt
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt
new file mode 100644
index 000000000000..00650d81c5c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.txt
@@ -0,0 +1,37 @@
+Mediatek-based GNSS Receiver DT binding
+
+Mediatek chipsets are used in GNSS-receiver modules produced by several
+vendors and can use an UART interface.
+
+Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
+properties.
+
+Required properties:
+
+- compatible : Must be
+
+ "globaltop,pa6h"
+
+- vcc-supply : Main voltage regulator (pin name: VCC)
+
+Optional properties:
+
+- gtop,reset-gpios : GPIO used to reset the device
+ (pin name: RESET, NRESET)
+- gtop,fix-gpios : GPIO used to determine device position fix state
+ (pin name: FIX, 3D_FIX)
+- timepulse-gpios : Time pulse GPIO (pin name: PPS1, 1PPS)
+- v-bckp-supply : Backup voltage regulator
+ (pin name: VBAT, VBACKUP)
+- current-speed : Default UART baud rate
+
+Example:
+
+serial@1234 {
+ compatible = "ns16550a";
+
+ gnss {
+ compatible = "globaltop,pa6h";
+ vcc-supply = <&vcc_3v3>;
+ };
+};
--
2.7.4
