Re: [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jan 26, 2019 at 08:36:14AM -0800, Guenter Roeck wrote:
> On 1/25/19 3:06 AM, Matti Vaittinen wrote:
> > +/* Max time we can set is 1 hour, 59 minutes and 59 seconds */
> > +#define WDT_MAX_MS ((2 * 60 * 60 - 1) * 1000)
> > +/* Minimum time is 1 second */
> > +#define WDT_MIN_MS 1000
> > +#define DEFAULT_TIMEOUT 60
> > +
> > +static int bd70528_wdt_probe(struct platform_device *pdev)
> > +{
> > +	struct bd70528 *bd70528;
> > +	struct wdtbd70528 *w;
> > +	int ret;
> > +	unsigned int reg;
> > +	struct watchdog_device *wdt;
> > +
> > +	bd70528 = dev_get_drvdata(pdev->dev.parent);
> > +	if (!bd70528) {
> > +		dev_err(&pdev->dev, "No MFD driver data\n");
> > +		return -EINVAL;
> > +	}
> > +	w = devm_kzalloc(&pdev->dev, sizeof(*w), GFP_KERNEL);
> > +	if (!w)
> > +		return -ENOMEM;
> > +	w->bd = bd70528;
> 
> Unless I am missing something, only the mutex and the regmap pointer
> are used from struct bd70528. With that in mind, it might be desirable
> to copy those pointers to struct wdtbd70528 to avoid the additional
> dereferencing at runtime.

You are not missing anyting. If we ever add support for another PMIC
variant we will probably be using also the chip_type. Untill then only
the mutex and regmap. (And maybe the of_node if we have any RTC
properties in DT). So at this point we just use regmap and mutex. I will
change this.

> > +	w->dev = &pdev->dev;
> > +
> > +	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> > +	if (!wdt)
> > +		return -ENOMEM;
> > +
> 
> struct watchdog_device can be part of struct wdtbd70528. Two separate allocations
> are not necessary.

Correct. Thanks for pointing that out. I'll simplify this.

> > +	wdt->info = &bd70528_wdt_info;
> > +	wdt->ops =  &bd70528_wdt_ops;
> > +	wdt->min_hw_heartbeat_ms = WDT_MIN_MS;
> > +	wdt->max_hw_heartbeat_ms = WDT_MAX_MS;
> > +	wdt->parent = pdev->dev.parent;
> > +	wdt->timeout = DEFAULT_TIMEOUT;
> > +	watchdog_set_drvdata(wdt, w);
> > +	watchdog_init_timeout(wdt, 0, pdev->dev.parent);
> > +
> > +	ret = bd70528_wdt_set_timeout(wdt, wdt->timeout);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to set the watchdog timeout\n");
> > +		return ret;
> > +	}
> > +
> > +	mutex_lock(&bd70528->rtc_timer_lock);
> > +	ret = regmap_read(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, &reg);
> > +	mutex_unlock(&bd70528->rtc_timer_lock);
> > +
> 
> I don't see the point for the above mutex locks. This is just reading a
> single register. regmap itself provides locking for that already.

It has a purpose here - but I'd better add a comment. We want to get the
initial state of WDG here. If the probe is executed when RTC time is being
set we may read the state just when RTC is (temporarily) disabling WDT -
and we might tell the WDT core that WDT is disabled - even if it is
actually enabled. The mutex prevents us from reading the WDT state when
RTC is being set.
 
Br,
	Matti Vaittinen



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux