Reviewed-by: JC Kuo <jckuo@xxxxxxxxxx>
On 1/25/19 7:30 PM, Thierry Reding wrote:
From: Thierry Reding <treding@xxxxxxxxxx>
Extend the bindings to cover the set of features found in Tegra186.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
.../devicetree/bindings/usb/nvidia,tegra124-xusb.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
index 4156c3e181c5..5bfcc0b4d6b9 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
@@ -10,6 +10,7 @@ Required properties:
- Tegra124: "nvidia,tegra124-xusb"
- Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"
- Tegra210: "nvidia,tegra210-xusb"
+ - Tegra186: "nvidia,tegra186-xusb"
- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI
registers and XUSB IPFS registers.
- reg-names: Must contain the following entries:
@@ -59,6 +60,8 @@ For Tegra210:
- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
+
+For Tegra210 and Tegra186:
- power-domains: A list of PM domain specifiers that reference each power-domain
used by the xHCI controller. This list must comprise of a specifier for the
XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
@@ -78,6 +81,7 @@ Optional properties:
- Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
- Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2,
usb3-3
+ - Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2
Example:
--------
