Re: [PATCH] ASoC: tda998x: Fix lack of required reg in DT documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, 20 Mar 2014 13:32:24 +0100
Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> wrote:

> > +  - reg: I2C address - must be <0x70>  
> 
> TDA9983b datasheet says:
> 
> "Bits A0 and A1 of the I2C-bus device address are externally selected
> by pins A0 and A1."
> 
> Therefore, 0x70, 0x71, 0x72, and 0x73 are valid i2c addresses.

Sebastian,

That's interesting!

For the Cubox and the AMX33XX boards, the I2C address of the HDMI
registers is 0x70, and the I2C address of the CEC registers is 0x34.

For other boards using the TDA998x family, if the I2C address is
different from 0x70, have you an idea about what can be the CEC I2C
address? (this value is actually hard-coded in the TDA998x driver)

-- 
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux