The interrupt handling method is changed from old-style cascade to
chained_irq which is more appropriate. Also, it can process the
corner situation that more than one irq is coming to a single
chip at the same time.
Signed-off-by: Zhou Yanjie <zhouyanjie@xxxxxxxx>
---
drivers/irqchip/irq-ingenic.c | 48 +++++++++++++++++++++----------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/irqchip/irq-ingenic.c b/drivers/irqchip/irq-ingenic.c
index 2ff0898..5f775a1 100644
--- a/drivers/irqchip/irq-ingenic.c
+++ b/drivers/irqchip/irq-ingenic.c
@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2009-2010, Lars-Peter Clausen <lars@xxxxxxxxxx>
- * JZ4740 platform IRQ support
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
+ * Ingenic XBurst platform IRQ support
*/
#include <linux/errno.h>
@@ -19,6 +10,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/irqchip/ingenic.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -41,22 +33,34 @@ struct ingenic_intc_data {
#define JZ_REG_INTC_PENDING 0x10
#define CHIP_SIZE 0x20
-static irqreturn_t intc_cascade(int irq, void *data)
+static void ingenic_chained_handle_irq(struct irq_desc *desc)
{
- struct ingenic_intc_data *intc = irq_get_handler_data(irq);
- uint32_t irq_reg;
+ struct ingenic_intc_data *intc = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ bool have_irq = false;
+ uint32_t pending;
unsigned i;
+ chained_irq_enter(chip, desc);
for (i = 0; i < intc->num_chips; i++) {
- irq_reg = readl(intc->base + (i * CHIP_SIZE) +
+ pending = readl(intc->base + (i * CHIP_SIZE) +
JZ_REG_INTC_PENDING);
- if (!irq_reg)
+ if (!pending)
continue;
- generic_handle_irq(__fls(irq_reg) + (i * 32) + JZ4740_IRQ_BASE);
+ have_irq = true;
+ while (pending) {
+ int bit = __fls(pending);
+
+ generic_handle_irq(bit + (i * 32) + JZ4740_IRQ_BASE);
+ pending &= ~BIT(bit);
+ }
}
- return IRQ_HANDLED;
+ if (!have_irq)
+ spurious_interrupt();
+
+ chained_irq_exit(chip, desc);
}
static void intc_irq_set_mask(struct irq_chip_generic *gc, uint32_t mask)
@@ -79,11 +83,6 @@ void ingenic_intc_irq_resume(struct irq_data *data)
intc_irq_set_mask(gc, gc->mask_cache);
}
-static struct irqaction intc_cascade_action = {
- .handler = intc_cascade,
- .name = "SoC intc cascade interrupt",
-};
-
static int __init ingenic_intc_of_init(struct device_node *node,
unsigned num_chips)
{
@@ -148,7 +147,8 @@ static int __init ingenic_intc_of_init(struct device_node *node,
if (!domain)
pr_warn("unable to register IRQ domain\n");
- setup_irq(parent_irq, &intc_cascade_action);
+ irq_set_chained_handler_and_data(parent_irq,
+ ingenic_chained_handle_irq, intc);
return 0;
out_unmap_irq:
--
2.7.4
