RE: [PATCH] arm64: dts: renesas: r8a7796: Add CMT device nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

Thanks for the feedback. I started testing CMT on latest kernel(Linux-next-20190125 and also renesas-dev) and found that it is broken on R-Car M3-W device.

On further investigation the patch (" 8234f6734c5d74ac794e5517437f51c57d65f865"   PM-runtime: Switch autosuspend over to using hrtimers)  is causing the issue.

During clock source switching, It calls the function "sh_cmt_enable"  which calls " pm_runtime_get_sync(&ch->cmt->pdev->dev);"  and after that console freezes.

Sergei: Have you noticed this issue  on R-Car V3M and V3H boards with latest kernel?

Regards,
Biju

> -----Original Message-----
> From: linux-renesas-soc-owner@xxxxxxxxxxxxxxx <linux-renesas-soc-
> owner@xxxxxxxxxxxxxxx> On Behalf Of Geert Uytterhoeven
> Sent: 24 January 2019 10:16
> To: Biju Das <biju.das@xxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>; Mark Rutland
> <mark.rutland@xxxxxxx>; Simon Horman <horms@xxxxxxxxxxxx>; Magnus
> Damm <magnus.damm@xxxxxxxxx>; Linux-Renesas <linux-renesas-
> soc@xxxxxxxxxxxxxxx>; open list:OPEN FIRMWARE AND FLATTENED DEVICE
> TREE BINDINGS <devicetree@xxxxxxxxxxxxxxx>; Geert Uytterhoeven
> <geert+renesas@xxxxxxxxx>; Chris Paterson
> <Chris.Paterson2@xxxxxxxxxxx>; Daniel Lezcano
> <daniel.lezcano@xxxxxxxxxx>; Thomas Gleixner <tglx@xxxxxxxxxxxxx>; John
> Stultz <john.stultz@xxxxxxxxxx>; Fabrizio Castro
> <fabrizio.castro@xxxxxxxxxxxxxx>; Samuel Holland <samuel@xxxxxxxxxxxx>
> Subject: Re: [PATCH] arm64: dts: renesas: r8a7796: Add CMT device nodes
>
> Hi Biju,
>
> On Fri, Oct 26, 2018 at 10:32 AM Biju Das <biju.das@xxxxxxxxxxxxxx> wrote:
> > This patch adds CMT{0|1|2|3} device nodes for r8a7796 SoC.
> >
> > Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> > ---
> > This patch is tested against renesas-dev
> >
> > I have executed on inconsistency-check, nanosleep and
> > clocksource_switch selftests on this arm64 SoC. The
> > inconsistency-check and nanosleep tests are working fine.The
> > clocksource_switch asynchronous test is failing due to inconsistency-check
> failure on "arch_sys_counter".
> >
> > But if i skip the clocksource_switching of "arch_sys_counter", the
> > asynchronous test is passing for CMT0/1/2/3 timer.
> >
> > Has any one noticed this issue?
>
> clockevents/next now has commit 7cd6dca3600d8d71
> ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer
> instability").  Perhaps this is related, and the same test program may indicate
> similar issues?
>
> See also https://lore.kernel.org/lkml/20190113021719.46457-2-
> samuel@xxxxxxxxxxxx/
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux