Re: [Linux-stm32] [PATCH V3 1/2] mmc: mmci: add variant property to set command stop bit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hi Ulf

I don't think you've seen my previous mail :-(
what is your feeling about "mmc: mmci: send stop command to clear the dpsm"

Regards
Ludo

On 1/3/19 11:35 AM, Ludovic BARRE wrote:
hi Ulf

happy new years.

Just a gentleman ping about patch2 of this series
"mmc: mmci: send stop command to clear the dpsm."

Regards
Ludo

On 12/11/18 10:53 AM, Ludovic BARRE wrote:


On 12/11/18 10:47 AM, Ulf Hansson wrote:
On Thu, 6 Dec 2018 at 16:13, Ludovic Barre <ludovic.Barre@xxxxxx> wrote:

From: Ludovic Barre <ludovic.barre@xxxxxx>

On cmd12 (STOP_TRANSMISSION), STM32 sdmmc variant needs to set
cmdstop bit in command register. The CPSM ("Command Path State Machine")
treats the command as a Stop Transmission command and signals
abort to the DPSM ("Data Path State Machine").

Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>

Applied for next, thanks!

thanks


Withholding patch2 for a while, as I need some more time to review it.

No problem,

Regards
Ludo


Kind regards
Uffe

---
  drivers/mmc/host/mmci.c | 6 ++++++
  drivers/mmc/host/mmci.h | 2 ++
  2 files changed, 8 insertions(+)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 13fa640..e352f5a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -21,6 +21,7 @@
  #include <linux/err.h>
  #include <linux/highmem.h>
  #include <linux/log2.h>
+#include <linux/mmc/mmc.h>
  #include <linux/mmc/pm.h>
  #include <linux/mmc/host.h>
  #include <linux/mmc/card.h>
@@ -274,6 +275,7 @@ static struct variant_data variant_stm32_sdmmc = {
         .cmdreg_lrsp_crc        = MCI_CPSM_STM32_LRSP_CRC,
         .cmdreg_srsp_crc        = MCI_CPSM_STM32_SRSP_CRC,
         .cmdreg_srsp            = MCI_CPSM_STM32_SRSP,
+       .cmdreg_stop            = MCI_CPSM_STM32_CMDSTOP,
         .data_cmd_enable        = MCI_CPSM_STM32_CMDTRANS,
         .irq_pio_mask           = MCI_IRQ_PIO_STM32_MASK,
         .datactrl_first         = true,
@@ -1100,6 +1102,10 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
                 mmci_reg_delay(host);
         }

+       if (host->variant->cmdreg_stop &&
+           cmd->opcode == MMC_STOP_TRANSMISSION)
+               c |= host->variant->cmdreg_stop;
+
         c |= cmd->opcode | host->variant->cmdreg_cpsm_enable;
         if (cmd->flags & MMC_RSP_PRESENT) {
                 if (cmd->flags & MMC_RSP_136)
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 550dd39..2422909 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -264,6 +264,7 @@ struct mmci_host;
   * @cmdreg_lrsp_crc: enable value for long response with crc
   * @cmdreg_srsp_crc: enable value for short response with crc
   * @cmdreg_srsp: enable value for short response without crc
+ * @cmdreg_stop: enable value for stop and abort transmission
   * @datalength_bits: number of bits in the MMCIDATALENGTH register
   * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY
   *           is asserted (likewise for RX)
@@ -316,6 +317,7 @@ struct variant_data {
         unsigned int            cmdreg_lrsp_crc;
         unsigned int            cmdreg_srsp_crc;
         unsigned int            cmdreg_srsp;
+       unsigned int            cmdreg_stop;
         unsigned int            datalength_bits;
         unsigned int            fifosize;
         unsigned int            fifohalfsize;
--
2.7.4

_______________________________________________
Linux-stm32 mailing list
Linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
https://st-md-mailman.stormreply.com/mailman/listinfo/linux-stm32



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux