Hi Kevin, On Wed, 23 Jan 2019 at 22:20, Kevin Hilman <khilman@xxxxxxxxxxxx> wrote: > > Anand Moon <linux.amoon@xxxxxxxxx> writes: > > > Add missing vbus-supply link to phy controller for usb_phy0 > > and usb_phy1 nodes, this changes fixed the power issue > > on usb ports usb, changes help fix usb reset warning. > > > > [ 821.991470] usb 1-1.2: reset high-speed USB device number 3 using dwc2 > > [ 825.243385] usb 1-1.2: reset high-speed USB device number 3 using dwc2 > > [ 828.151310] usb 1-1.2: reset high-speed USB device number 3 using dwc2 > > [ 830.991241] usb 1-1.2: reset high-speed USB device number 3 using dwc2 > > > > Fixes: 2eb79a4d15ff (ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board) > > Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> > > Cc: Jerome Brunet <jbrunet@xxxxxxxxxxxx> > > Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > > Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx> > > --- > > Rebased on Kevin's amlogic/v5.0/fixes branch > > As requested, dropping this series from the fixes branch pending further > debug and testing. > > Kevin [snip] Thanks your very much. Best Regards -Anand
