[PATCH v2] powerpc: build virtex dtb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I wanted to test the virtex440-ml507 qemu machine and found that the dtb
for it was not builded.
All powerpc DTB are only built when CONFIG_OF_ALL_DTBS is set which depend on
COMPILE_TEST.

This patchs adds build of virtex dtbs depending on
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD option.

Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
---
Changes since v1:
- squashed the two dtb into one make line
 arch/powerpc/boot/dts/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile
index fb335d05aae8..1cbc0e4ce857 100644
--- a/arch/powerpc/boot/dts/Makefile
+++ b/arch/powerpc/boot/dts/Makefile
@@ -4,3 +4,4 @@ subdir-y += fsl
 
 dtstree		:= $(srctree)/$(src)
 dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+dtb-$(CONFIG_XILINX_VIRTEX440_GENERIC_BOARD) += virtex440-ml507.dtb virtex440-ml510.dtb
-- 
2.19.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux