On Fri, Jan 18, 2019 at 02:37:14PM +0100, Michael Tretter wrote: > Add device-tree bindings for the Allegro DVT video IP core found on the > Xilinx ZynqMP EV family. > > Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx> > --- > Changes since v1: > none > > --- > .../devicetree/bindings/media/allegro.txt | 35 +++++++++++++++++++ > 1 file changed, 35 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/allegro.txt > > diff --git a/Documentation/devicetree/bindings/media/allegro.txt b/Documentation/devicetree/bindings/media/allegro.txt > new file mode 100644 > index 000000000000..765f4b0c1a57 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/allegro.txt > @@ -0,0 +1,35 @@ > +Device-tree bindings for the Allegro DVT video IP codecs present in the Xilinx > +ZynqMP SoC. The IP core may either be a H.264/H.265 encoder or H.264/H.265 > +decoder ip core. > + > +Each actual codec engines is controlled by a microcontroller (MCU). Host > +software uses a provided mailbox interface to communicate with the MCU. The > +MCU share an interrupt. > + > +Required properties: > + - compatible: value should be one of the following > + "allegro,al5e-1.1", "allegro,al5e": encoder IP core > + "allegro,al5d-1.1", "allegro,al5d": decoder IP core > + - reg: base and length of the memory mapped register region and base and > + length of the memory mapped sram > + - reg-names: must include "regs" and "sram" > + - interrupts: shared interrupt from the MCUs to the processing system > + - interrupt-names: "vcu_host_interrupt" No point in having *-names when there is only one entry. > + > +Example: > + al5e: al5e@a0009000 { video-codec as suggested. > + compatible = "allegro,al5e"; Doesn't match the documentation above. > + reg = <0 0xa0009000 0 0x1000>, > + <0 0xa0000000 0 0x8000>; > + reg-names = "regs", "sram"; > + interrupt-names = "vcu_host_interrupt"; > + interrupts = <0 96 4>; > + }; > + al5d: al5d@a0029000 { > + compatible = "allegro,al5d"; > + reg = <0 0xa0029000 0 0x1000>, > + <0 0xa0020000 0 0x8000>; > + reg-names = "regs", "sram"; > + interrupt-names = "vcu_host_interrupt"; > + interrupts = <0 96 4>; > + }; > -- > 2.20.1 >