[PATCH 2/2] dt-bindings: i2c-mux-pca954x: Invert i2c-mux-idle-disconnect property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Robert Shearman <robert.shearman@xxxxxxx>

Update the binding docs for i2c-mux-pca954x to reflect that the driver
now defaults to idle-disconnect behaviour by removing the documentation
of the previous i2c-mux-idle-disconnect property and introducing a new
inverse i2c-mux-no-idle-disconnect property.

Signed-off-by: Robert Shearman <robert.shearman@xxxxxxx>
---
 Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index 30ac6a60f041..c3a94de8b3ef 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -25,9 +25,11 @@ Required Properties:
 Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the reset input.
-  - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
-    children in idle state. This is necessary for example, if there are several
-    multiplexers on the bus and the devices behind them use same I2C addresses.
+  - i2c-mux-no-idle-disconnect: Boolean; if defined, asks mux to not
+    disconnect children in idle state. This optimises I2C parent
+    operations and is useful if it is guaranteed that there are no
+    multiplexers on the bus with devices behind them using the same
+    I2C address.
   - interrupts: Interrupt mapping for IRQ.
   - interrupt-controller: Marks the device node as an interrupt controller.
   - #interrupt-cells : Should be two.
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux