Hi Min,
On Mon, Jan 21, 2019 at 08:22:31PM +0800, min.guo@xxxxxxxxxxxx wrote:
> From: Min Guo <min.guo@xxxxxxxxxxxx>
>
> This adds support for MediaTek musb controller in
> host, peripheral and otg mode.
> There are some quirk of MediaTek musb controller, such as:
> -W1C interrupt status registers
> -Private data toggle registers
> -No dedicated DMA interrupt line
>
> Signed-off-by: Min Guo <min.guo@xxxxxxxxxxxx>
> Signed-off-by: Yonglong Wu <yonglong.wu@xxxxxxxxxxxx>
> ---
> changes in v4:
> 1. no changes
>
> changes in v3:
> suggested by Bin:
> 1. Remove 'u8/u16 data' parameter in clearb/w() hooks
> 2. Replace musb_readb/w() with musb_clearb/w() to clear interrupts status
>
> changes in v2:
> suggested by Bin:
> 1. Add summarize of MediaTek musb controller differences in the commit log
> 2. Add "|| COMPILE_TEST" in Kconfig
> 3. Move MediaTek's private toggle registers from musb_regs.h to mediatek.c
> 4. Replace musb_readl() with musb_readw() to read 16bit toggle register
> ---
> drivers/usb/musb/Kconfig | 8 +-
> drivers/usb/musb/Makefile | 1 +
> drivers/usb/musb/mediatek.c | 624 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 632 insertions(+), 1 deletion(-)
> create mode 100644 drivers/usb/musb/mediatek.c
>
[snip]
> +static irqreturn_t generic_interrupt(int irq, void *__hci)
> +{
> + unsigned long flags;
> + irqreturn_t retval = IRQ_NONE;
> + struct musb *musb = __hci;
> +
> + spin_lock_irqsave(&musb->lock, flags);
> + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB) &
> + musb_readb(musb->mregs, MUSB_INTRUSBE);
> + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX)
> + & musb_readw(musb->mregs, MUSB_INTRTXE);
> + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX)
> + & musb_readw(musb->mregs, MUSB_INTRRXE);
Based on my comment in 5/6, the above 3 musb_readb/w() can be changed to
> + /* MediaTek controller interrupt status is W1C */
> + musb_clearw(musb->mregs, MUSB_INTRRX);
> + musb_clearw(musb->mregs, MUSB_INTRTX);
> + musb_clearb(musb->mregs, MUSB_INTRUSB);
musb->int_usb = musb_clearb(musb->mregs, MUSB_INTRUSB)
musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX);
musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX);
> +
> + if (musb->int_usb || musb->int_tx || musb->int_rx)
> + retval = musb_interrupt(musb);
> +
> + spin_unlock_irqrestore(&musb->lock, flags);
> +
> + return retval;
> +}
> +
[snip]
> +
> +static u8 mtk_musb_clearb(void __iomem *addr, unsigned int offset)
> +{
> + u8 data;
> +
> + /* W1C */
> + data = musb_readb(addr, offset);
> + musb_writeb(addr, offset, data);
> + return musb_readb(addr, offset);
return data;
> +}
> +
> +static u16 mtk_musb_clearw(void __iomem *addr, unsigned int offset)
> +{
> + u16 data;
> +
> + /* W1C */
> + data = musb_readw(addr, offset);
> + musb_writew(addr, offset, data);
> + return musb_readw(addr, offset);
return data;
Regards,
-Bin.
