Hi Anand,
On Sun, Jan 13, 2019 at 7:18 PM Anand Moon <linux.amoon@xxxxxxxxx> wrote:
>
> Override the dr_mode from "host" to "peripheral" for dwc2
> usb_phy0->usb0 initialization of OTG Micro-B type.
> Changes fix the below warning for phy poweron failed --> -22
>
> This fix the initialization of c9040000.usb phy.
>
> [ 1.639706] phy phy-c1108800.phy.0: USB ID detect failed!
> [ 1.643850] phy phy-c1108800.phy.0: phy poweron failed --> -22
> [ 1.649706] ------------[ cut here ]------------
> [ 1.654273] WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:2054 _regulator_put.part.8+0xf8/0xfc
> [ 1.663400] Modules linked in:
> [ 1.666439] CPU: 0 PID: 29 Comm: kworker/0:1 Not tainted 4.20.0-xc1ml #11
> [ 1.673192] Hardware name: Amlogic Meson platform
> [ 1.677894] Workqueue: events deferred_probe_work_func
> [ 1.683027] [<c0312204>] (unwind_backtrace) from [<c030cb8c>] (show_stack+0x10/0x14)
> [ 1.690746] [<c030cb8c>] (show_stack) from [<c0e223b8>] (dump_stack+0x8c/0xa0)
> [ 1.697953] [<c0e223b8>] (dump_stack) from [<c0346334>] (__warn.part.3+0xbc/0xd8)
> [ 1.705418] [<c0346334>] (__warn.part.3) from [<c03464b0>] (warn_slowpath_null+0x44/0x4c)
> [ 1.713579] [<c03464b0>] (warn_slowpath_null) from [<c07df6b8>] (_regulator_put.part.8+0xf8/0xfc)
> [ 1.722437] [<c07df6b8>] (_regulator_put.part.8) from [<c07df6e4>] (regulator_put+0x28/0x38)
> [ 1.730859] [<c07df6e4>] (regulator_put) from [<c07df71c>] (regulator_bulk_free+0x28/0x38)
> [ 1.739112] [<c07df71c>] (regulator_bulk_free) from [<c0943858>] (release_nodes+0x1bc/0x200)
> [ 1.747537] [<c0943858>] (release_nodes) from [<c093f82c>] (really_probe+0x110/0x2cc)
> [ 1.755350] [<c093f82c>] (really_probe) from [<c093fb4c>] (driver_probe_device+0x60/0x16c)
> [ 1.763599] [<c093fb4c>] (driver_probe_device) from [<c093dcd4>] (bus_for_each_drv+0x80/0xc4)
> [ 1.772110] [<c093dcd4>] (bus_for_each_drv) from [<c093f6ac>] (__device_attach+0xd0/0x138)
> [ 1.780359] [<c093f6ac>] (__device_attach) from [<c093eae4>] (bus_probe_device+0x84/0x8c)
> [ 1.788522] [<c093eae4>] (bus_probe_device) from [<c093ef80>] (deferred_probe_work_func+0x60/0x8c)
> [ 1.797470] [<c093ef80>] (deferred_probe_work_func) from [<c035fdb8>] (process_one_work+0x218/0x504)
> [ 1.806585] [<c035fdb8>] (process_one_work) from [<c0360ea8>] (worker_thread+0x2a8/0x5bc)
> [ 1.814748] [<c0360ea8>] (worker_thread) from [<c0365a18>] (kthread+0x14c/0x154)
> [ 1.822128] [<c0365a18>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> [ 1.829331] Exception stack(0xee0ebfb0 to 0xee0ebff8)
> [ 1.834369] bfa0: 00000000 00000000 00000000 00000000
> [ 1.842534] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 1.850695] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [ 1.857311] ---[ end trace e28bbc26874282a4 ]---
> [ 1.861984] ------------[ cut here ]------------
> [ 1.866524] WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:2054 _regulator_put.part.8+0xf8/0xfc
> [ 1.875629] Modules linked in:
> [ 1.878658] CPU: 0 PID: 29 Comm: kworker/0:1 Tainted: GW 4.20.0-xc1ml #11
> [ 1.886817] Hardware name: Amlogic Meson platform
> [ 1.891513] Workqueue: events deferred_probe_work_func
> [ 1.896641] [<c0312204>] (unwind_backtrace) from [<c030cb8c>] (show_stack+0x10/0x14)
> [ 1.904366] [<c030cb8c>] (show_stack) from [<c0e223b8>] (dump_stack+0x8c/0xa0)
> [ 1.911573] [<c0e223b8>] (dump_stack) from [<c0346334>] (__warn.part.3+0xbc/0xd8)
> [ 1.919041] [<c0346334>] (__warn.part.3) from [<c03464b0>] (warn_slowpath_null+0x44/0x4c)
> [ 1.927203] [<c03464b0>] (warn_slowpath_null) from [<c07df6b8>] (_regulator_put.part.8+0xf8/0xfc)
> [ 1.936060] [<c07df6b8>] (_regulator_put.part.8) from [<c07df6e4>] (regulator_put+0x28/0x38)
> [ 1.944483] [<c07df6e4>] (regulator_put) from [<c07df71c>] (regulator_bulk_free+0x28/0x38)
> [ 1.952734] [<c07df71c>] (regulator_bulk_free) from [<c0943858>] (release_nodes+0x1bc/0x200)
> [ 1.961159] [<c0943858>] (release_nodes) from [<c093f82c>] (really_probe+0x110/0x2cc)
> [ 1.968974] [<c093f82c>] (really_probe) from [<c093fb4c>] (driver_probe_device+0x60/0x16c)
> [ 1.977224] [<c093fb4c>] (driver_probe_device) from [<c093dcd4>] (bus_for_each_drv+0x80/0xc4)
> [ 1.985734] [<c093dcd4>] (bus_for_each_drv) from [<c093f6ac>] (__device_attach+0xd0/0x138)
> [ 1.993984] [<c093f6ac>] (__device_attach) from [<c093eae4>] (bus_probe_device+0x84/0x8c)
> [ 2.002147] [<c093eae4>] (bus_probe_device) from [<c093ef80>] (deferred_probe_work_func+0x60/0x8c)
> [ 2.011092] [<c093ef80>] (deferred_probe_work_func) from [<c035fdb8>] (process_one_work+0x218/0x504)
> [ 2.020209] [<c035fdb8>] (process_one_work) from [<c0360ea8>] (worker_thread+0x2a8/0x5bc)
> [ 2.028371] [<c0360ea8>] (worker_thread) from [<c0365a18>] (kthread+0x14c/0x154)
> [ 2.035752] [<c0365a18>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> [ 2.042955] Exception stack(0xee0ebfb0 to 0xee0ebff8)
> [ 2.047993] bfa0: 00000000 00000000 00000000 00000000
> [ 2.056158] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 2.064320] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [ 2.070934] ---[ end trace e28bbc26874282a5 ]---
>
> Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> Cc: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> ---
> Rebased on Kevin's amlogic/v5.0/fixes branch
> Note the warning is not getting produced on the latest kernel.
> ---
> arch/arm/boot/dts/meson8b-odroidc1.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
> index a49a8509b288..9d7f725cfe35 100644
> --- a/arch/arm/boot/dts/meson8b-odroidc1.dts
> +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
> @@ -318,6 +318,7 @@
>
> &usb0 {
> status = "okay";
> + dr_mode = "peripheral";
> };
with this change I get the following message during boot:
dwc2 c9040000.usb: Configuration mismatch. dr_mode forced to host
as far as I understand your original problem is the following error
from the USB2 PHY driver:
phy phy-c1108800.phy.0: USB ID detect failed!
phy phy-c1108800.phy.0: phy poweron failed --> -22
maybe we should fix that instead?
Regards
Martin
