Re: [PATCH v2 0/2] Add support for the Aspeed AST2500 SoC EDAC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 17, 2019 at 08:38:15AM -0800, Stefan Schaeckeler wrote:
> From: Stefan M Schaeckeler <sschaeck@xxxxxxxxx>
> 
> Add support for the Aspeed AST2500 SoC EDAC driver.
> 
> Changes since v1:
> - Addressed all cosmetic issues
> - Fixed (un-)recoverable address calculation in reg58 and reg5c
> - Removed status field from the example device tree binding
> - Added little more text to Kconfig
> 
> 
> Stefan M Schaeckeler (2):
>   EDAC: Add Aspeed AST2500 EDAC driver
>   dt-bindings: edac: Aspeed AST2500
> 
>  .../bindings/edac/aspeed-sdram-edac.txt       |  25 ++
>  MAINTAINERS                                   |   6 +
>  arch/arm/boot/dts/aspeed-g5.dtsi              |   7 +
>  drivers/edac/Kconfig                          |   8 +
>  drivers/edac/Makefile                         |   1 +
>  drivers/edac/aspeed_edac.c                    | 421 ++++++++++++++++++
>  6 files changed, 468 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
>  create mode 100644 drivers/edac/aspeed_edac.c
> 
> -- 

Queued, thanks.

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux