This patch fixes an issue that mdio_bus_phy_resume() doesn't call
phy_resume() if the PHY is not attached.
Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/net/phy/phy_device.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index bb14108..d86356f 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -225,7 +225,7 @@ static void phy_mdio_device_remove(struct mdio_device *mdiodev)
static DEFINE_MUTEX(phy_fixup_lock);
#ifdef CONFIG_PM
-static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
+static bool mdio_bus_phy_may_suspend(struct phy_device *phydev, bool suspend)
{
struct device_driver *drv = phydev->mdio.dev.driver;
struct phy_driver *phydrv = to_phy_driver(drv);
@@ -237,10 +237,11 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
/* PHY not attached? May suspend if the PHY has not already been
* suspended as part of a prior call to phy_disconnect() ->
* phy_detach() -> phy_suspend() because the parent netdev might be the
- * MDIO bus driver and clock gated at this point.
+ * MDIO bus driver and clock gated at this point. Also may resume if
+ * PHY is not attached.
*/
if (!netdev)
- return !phydev->suspended;
+ return suspend ? !phydev->suspended : phydev->suspended;
if (netdev->wol_enabled)
return false;
@@ -275,7 +276,7 @@ static int mdio_bus_phy_suspend(struct device *dev)
if (phydev->attached_dev && phydev->adjust_link)
phy_stop_machine(phydev);
- if (!mdio_bus_phy_may_suspend(phydev))
+ if (!mdio_bus_phy_may_suspend(phydev, true))
return 0;
return phy_suspend(phydev);
@@ -286,7 +287,7 @@ static int mdio_bus_phy_resume(struct device *dev)
struct phy_device *phydev = to_phy_device(dev);
int ret;
- if (!mdio_bus_phy_may_suspend(phydev))
+ if (!mdio_bus_phy_may_suspend(phydev, false))
goto no_resume;
ret = phy_resume(phydev);
--
1.9.1
