On Mon 17 Dec 01:46 PST 2018, Jorge Ramirez-Ortiz wrote:
> When the APCS clock is registered (platform dependent), it retrieves
> its parent names from hardcoded values in the driver.
>
> The following commit allows the DT node to provide such clock names to
> the platform data based clock driver therefore avoiding having to
> explicitly embed those names in the clock driver source code.
>
> Co-developed-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
> Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
> ---
> .../bindings/mailbox/qcom,apcs-kpss-global.txt | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
> index 1232fc9..f252439 100644
> --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
> +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
> @@ -23,6 +23,10 @@ platforms.
> Value type: <phandle>
> Definition: phandle to the input PLL, which feeds the APCS mux/divider
>
> + Usage: required if #clock-names property is present
> + Value type: <phandle array>
> + Definition: phandles to the two parent clocks of the clock driver.
I presume you meant to replace the existing definition of "clocks"?
I think the purpose of "required if #clock-cells" comes from that
meaning that it represents a clock-controller if #clock-cells is
specified, in which case it requires the upstream clock(s).
Regards,
Bjorn
> +
> - #mbox-cells:
> Usage: required
> Value type: <u32>
> @@ -33,6 +37,12 @@ platforms.
> Value type: <u32>
> Definition: as described in clock.txt, must be 0
>
> +- clock-names:
> + Usage: required if the platform data based clock driver needs to
> + retrieve the parent clock names from device tree.
> + This will requires two mandatory clocks to be defined.
> + Value type: <string-array>
> + Definition: must be "aux" and "pll"
>
> = EXAMPLE
> The following example describes the APCS HMSS found in MSM8996 and part of the
> @@ -65,3 +75,14 @@ Below is another example of the APCS binding on MSM8916 platforms:
> clocks = <&a53pll>;
> #clock-cells = <0>;
> };
> +
> +Below is another example of the APCS binding on QCS404 platforms:
> +
> + apcs_glb: mailbox@b011000 {
> + compatible = "qcom,qcs404-apcs-apps-global", "syscon";
> + reg = <0x0b011000 0x1000>;
> + #mbox-cells = <1>;
> + clocks = <&gcc GCC_GPLL0_AO_OUT_MAIN>, <&apcs_hfpll>;
> + clock-names = "aux", "pll";
> + #clock-cells = <0>;
> + };
> --
> 2.7.4
>
