Hello, This patchset adds Oxalis board support. This board is one of the 96Boards Enterprise Edition platform from EBS-SYSTART GmbH. Below are some of the key features of this board: * SoC: NXP Layerscape LS1012A * RAM: 1GB DDR3L * PMU: NXP VR5100 * Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA * Connectivity: 2x Ethernet * USB: 2x USB3.0 More information about this board can be found in 96Boards product page: https://www.96boards.org/product/oxalis/ Ethernet and SPI flash are not supported yet! Thanks, Mani Changes in v2: As per Rob's review: * Adopted the Oxalis board binding to JSON format. * Sorted the EBS-SYSTART vendor prefix alphabetically. * Used the generic node name for audio codec. Manivannan Sadhasivam (3): dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix dt-bindings: arm: fsl: Add devicetree binding for Oxalis arm64: dts: freescale: Add devicetree for Oxalis .../devicetree/bindings/arm/fsl.yaml | 3 +- .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++ 4 files changed, 100 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts -- 2.17.1
