RE: [PATCH 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sakari,

Thanks for reviewing my patch.

> -----Original Message-----
> From: linux-media-owner@xxxxxxxxxxxxxxx [mailto:linux-media-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Sakari Ailus
> Sent: Wednesday, January 09, 2019 5:22 PM
> To: Vishal Sagar <vishal.sagar@xxxxxxxxxx>
> Cc: Hyun Kwon <hyunk@xxxxxxxxxx>; laurent.pinchart@xxxxxxxxxxxxxxxx;
> Michal Simek <michals@xxxxxxxxxx>; linux-media@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; sakari.ailus@xxxxxxxxxxxxxxx;
> hans.verkuil@xxxxxxxxx; mchehab@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx; Dinesh Kumar <dineshk@xxxxxxxxxx>; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem
> driver
> 
> EXTERNAL EMAIL
> 
> Hi Vishal,
> 
> Please see my comments below.
> 
> On Wed, May 30, 2018 at 12:24:44AM +0530, Vishal Sagar wrote:
> > The Xilinx MIPI CSI-2 Rx Subsystem soft IP is used to capture images
> > from MIPI CSI-2 camera sensors and output AXI4-Stream video data ready
> > for image processing.
> >
> > It supports upto 4 lanes, filtering based on Virtual Channel selected in
> > IP, an optional Xilinx IIC controller, optional register interface for
> > the DPHY, multiple color formats, short packet capture,
> >
> > This driver helps configure the number of active lanes to be set,
> > setting and handling interrupts and IP core enable.
> > It logs the count of events occurring according to their type between
> > streaming ON and OFF. The short packet reception is notified to
> > application via v4l2_event.
> >
> > Signed-off-by: Vishal Sagar <vishal.sagar@xxxxxxxxxx>
> > ---
> >  drivers/media/platform/xilinx/Kconfig           |   12 +
> >  drivers/media/platform/xilinx/Makefile          |    1 +
> >  drivers/media/platform/xilinx/xilinx-csi2rxss.c | 1751
> +++++++++++++++++++++++
> >  include/uapi/linux/xilinx-csi2rxss.h            |   25 +
> >  include/uapi/linux/xilinx-v4l2-controls.h       |   14 +
> >  5 files changed, 1803 insertions(+)
> >  create mode 100644 drivers/media/platform/xilinx/xilinx-csi2rxss.c
> >  create mode 100644 include/uapi/linux/xilinx-csi2rxss.h
> >
> > diff --git a/drivers/media/platform/xilinx/Kconfig
> b/drivers/media/platform/xilinx/Kconfig
> > index a5d21b7..06d5944 100644
> > --- a/drivers/media/platform/xilinx/Kconfig
> > +++ b/drivers/media/platform/xilinx/Kconfig
> > @@ -8,6 +8,18 @@ config VIDEO_XILINX
> >
> >  if VIDEO_XILINX
> >
> > +config VIDEO_XILINX_CSI2RXSS
> > +       tristate "Xilinx CSI2 Rx Subsystem"
> > +       depends on VIDEO_XILINX
> 
> I'm no Kconfig expert, but I'd think that you don't need to depend on
> things that the option already depends on if (above).
> 

Ok. I will check and remove this if ok in next version.

> > +       help
> > +         Driver for Xilinx MIPI CSI2 Rx Subsystem. This is a V4L sub-device
> > +         based driver that takes input from CSI2 Tx source and converts
> > +         it into an AXI4-Stream. It has a DPHY (whose register interface
> > +         can be enabled, an optional I2C controller and an optional Video
> > +         Format Bridge which converts the AXI4-Stream data to Xilinx Video
> > +         Bus formats based on UG934. The driver is used to set the number
> > +         of active lanes and get short packet data.
> > +
> >  config VIDEO_XILINX_TPG
> >         tristate "Xilinx Video Test Pattern Generator"
> >         depends on VIDEO_XILINX
> > diff --git a/drivers/media/platform/xilinx/Makefile
> b/drivers/media/platform/xilinx/Makefile
> > index e8a0f2a..768f079 100644
> > --- a/drivers/media/platform/xilinx/Makefile
> > +++ b/drivers/media/platform/xilinx/Makefile
> > @@ -1,5 +1,6 @@
> >  xilinx-video-objs += xilinx-dma.o xilinx-vip.o xilinx-vipp.o
> >
> >  obj-$(CONFIG_VIDEO_XILINX) += xilinx-video.o
> > +obj-$(CONFIG_VIDEO_XILINX_CSI2RXSS) += xilinx-csi2rxss.o
> >  obj-$(CONFIG_VIDEO_XILINX_TPG) += xilinx-tpg.o
> >  obj-$(CONFIG_VIDEO_XILINX_VTC) += xilinx-vtc.o
> > diff --git a/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> b/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> > new file mode 100644
> > index 0000000..03f387c
> > --- /dev/null
> > +++ b/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> > @@ -0,0 +1,1751 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Xilinx MIPI CSI2 Rx Subsystem
> > + *
> > + * Copyright (C) 2016 - 2018 Xilinx, Inc.
> > + *
> > + * Contacts: Vishal Sagar <vishal.sagar@xxxxxxxxxx>
> > + *
> > + */
> > +
> > +#include <dt-bindings/media/xilinx-vip.h>
> > +#include <linux/bitops.h>
> > +#include <linux/compiler.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm.h>
> > +#include <linux/slab.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/spinlock_types.h>
> > +#include <linux/types.h>
> > +#include <linux/v4l2-subdev.h>
> > +#include <linux/xilinx-csi2rxss.h>
> > +#include <linux/xilinx-v4l2-controls.h>
> > +#include <media/media-entity.h>
> > +#include <media/v4l2-common.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-subdev.h>
> > +#include "xilinx-vip.h"
> > +
> > +/*
> > + * MIPI CSI2 Rx register map, bitmask and offsets
> > + */
> > +#define XCSI_CCR_OFFSET                        0x00000000
> > +#define XCSI_CCR_SOFTRESET_SHIFT       1
> > +#define XCSI_CCR_COREENB_SHIFT         0
> > +#define XCSI_CCR_SOFTRESET_MASK
> BIT(XCSI_CCR_SOFTRESET_SHIFT)
> > +#define XCSI_CCR_COREENB_MASK          BIT(XCSI_CCR_COREENB_SHIFT)
> > +
> > +#define XCSI_PCR_OFFSET                        0x00000004
> > +#define XCSI_PCR_MAXLANES_MASK         0x00000018
> > +#define XCSI_PCR_ACTLANES_MASK         0x00000003
> > +#define XCSI_PCR_MAXLANES_SHIFT                3
> > +#define XCSI_PCR_ACTLANES_SHIFT                0
> > +
> > +#define XCSI_CSR_OFFSET                        0x00000010
> > +#define XCSI_CSR_PKTCOUNT_SHIFT                16
> > +#define XCSI_CSR_SPFIFOFULL_SHIFT      3
> > +#define XCSI_CSR_SPFIFONE_SHIFT                2
> > +#define XCSI_CSR_SLBF_SHIFT            1
> > +#define XCSI_CSR_RIPCD_SHIFT           0
> > +#define XCSI_CSR_PKTCOUNT_MASK         0xFFFF0000
> > +#define XCSI_CSR_SPFIFOFULL_MASK       BIT(XCSI_CSR_SPFIFOFULL_SHIFT)
> > +#define XCSI_CSR_SPFIFONE_MASK         BIT(XCSI_CSR_SPFIFONE_SHIFT)
> > +#define XCSI_CSR_SLBF_MASK             BIT(XCSI_CSR_SLBF_SHIFT)
> > +#define XCSI_CSR_RIPCD_MASK            BIT(XCSI_CSR_RIPCD_SHIFT)
> > +
> > +#define XCSI_GIER_OFFSET               0x00000020
> > +#define XCSI_GIER_GIE_SHIFT            0
> > +#define XCSI_GIER_GIE_MASK             BIT(XCSI_GIER_GIE_SHIFT)
> > +#define XCSI_GIER_SET                  1
> > +#define XCSI_GIER_RESET                        0
> > +
> > +#define XCSI_ISR_OFFSET                        0x00000024
> > +#define XCSI_ISR_FR_SHIFT              31
> > +#define XCSI_ISR_ILC_SHIFT             21
> > +#define XCSI_ISR_SPFIFOF_SHIFT         20
> > +#define XCSI_ISR_SPFIFONE_SHIFT                19
> > +#define XCSI_ISR_SLBF_SHIFT            18
> > +#define XCSI_ISR_STOP_SHIFT            17
> > +#define XCSI_ISR_SOTERR_SHIFT          13
> > +#define XCSI_ISR_SOTSYNCERR_SHIFT      12
> > +#define XCSI_ISR_ECC2BERR_SHIFT                11
> > +#define XCSI_ISR_ECC1BERR_SHIFT                10
> > +#define XCSI_ISR_CRCERR_SHIFT          9
> > +#define XCSI_ISR_DATAIDERR_SHIFT       8
> > +#define XCSI_ISR_VC3FSYNCERR_SHIFT     7
> > +#define XCSI_ISR_VC3FLVLERR_SHIFT      6
> > +#define XCSI_ISR_VC2FSYNCERR_SHIFT     5
> > +#define XCSI_ISR_VC2FLVLERR_SHIFT      4
> > +#define XCSI_ISR_VC1FSYNCERR_SHIFT     3
> > +#define XCSI_ISR_VC1FLVLERR_SHIFT      2
> > +#define XCSI_ISR_VC0FSYNCERR_SHIFT     1
> > +#define XCSI_ISR_VC0FLVLERR_SHIFT      0
> > +#define XCSI_ISR_FR_MASK               BIT(XCSI_ISR_FR_SHIFT)
> > +#define XCSI_ISR_ILC_MASK              BIT(XCSI_ISR_ILC_SHIFT)
> > +#define XCSI_ISR_SPFIFOF_MASK          BIT(XCSI_ISR_SPFIFOF_SHIFT)
> > +#define XCSI_ISR_SPFIFONE_MASK         BIT(XCSI_ISR_SPFIFONE_SHIFT)
> > +#define XCSI_ISR_SLBF_MASK             BIT(XCSI_ISR_SLBF_SHIFT)
> > +#define XCSI_ISR_STOP_MASK             BIT(XCSI_ISR_STOP_SHIFT)
> > +#define XCSI_ISR_SOTERR_MASK           BIT(XCSI_ISR_SOTERR_SHIFT)
> > +#define XCSI_ISR_SOTSYNCERR_MASK       BIT(XCSI_ISR_SOTSYNCERR_SHIFT)
> > +#define XCSI_ISR_ECC2BERR_MASK         BIT(XCSI_ISR_ECC2BERR_SHIFT)
> > +#define XCSI_ISR_ECC1BERR_MASK         BIT(XCSI_ISR_ECC1BERR_SHIFT)
> > +#define XCSI_ISR_CRCERR_MASK           BIT(XCSI_ISR_CRCERR_SHIFT)
> > +#define XCSI_ISR_DATAIDERR_MASK
> BIT(XCSI_ISR_DATAIDERR_SHIFT)
> > +#define XCSI_ISR_VC3FSYNCERR_MASK
> BIT(XCSI_ISR_VC3FSYNCERR_SHIFT)
> > +#define XCSI_ISR_VC3FLVLERR_MASK       BIT(XCSI_ISR_VC3FLVLERR_SHIFT)
> > +#define XCSI_ISR_VC2FSYNCERR_MASK
> BIT(XCSI_ISR_VC2FSYNCERR_SHIFT)
> > +#define XCSI_ISR_VC2FLVLERR_MASK       BIT(XCSI_ISR_VC2FLVLERR_SHIFT)
> > +#define XCSI_ISR_VC1FSYNCERR_MASK
> BIT(XCSI_ISR_VC1FSYNCERR_SHIFT)
> > +#define XCSI_ISR_VC1FLVLERR_MASK       BIT(XCSI_ISR_VC1FLVLERR_SHIFT)
> > +#define XCSI_ISR_VC0FSYNCERR_MASK
> BIT(XCSI_ISR_VC0FSYNCERR_SHIFT)
> > +#define XCSI_ISR_VC0FLVLERR_MASK       BIT(XCSI_ISR_VC0FLVLERR_SHIFT)
> > +#define XCSI_ISR_ALLINTR_MASK          0x803FFFFF
> > +
> > +#define XCSI_INTR_PROT_MASK    (XCSI_ISR_VC3FSYNCERR_MASK |    \
> > +                                XCSI_ISR_VC3FLVLERR_MASK |     \
> > +                                XCSI_ISR_VC2FSYNCERR_MASK |    \
> > +                                XCSI_ISR_VC2FLVLERR_MASK |     \
> > +                                XCSI_ISR_VC1FSYNCERR_MASK |    \
> > +                                XCSI_ISR_VC1FLVLERR_MASK |     \
> > +                                XCSI_ISR_VC0FSYNCERR_MASK |    \
> > +                                XCSI_ISR_VC0FLVLERR_MASK)
> > +
> > +#define XCSI_INTR_PKTLVL_MASK  (XCSI_ISR_ECC2BERR_MASK |       \
> > +                                XCSI_ISR_ECC1BERR_MASK |       \
> > +                                XCSI_ISR_CRCERR_MASK   |       \
> > +                                XCSI_ISR_DATAIDERR_MASK)
> > +
> > +#define XCSI_INTR_DPHY_MASK    (XCSI_ISR_SOTERR_MASK   |       \
> > +                                XCSI_ISR_SOTSYNCERR_MASK)
> > +
> > +#define XCSI_INTR_SPKT_MASK    (XCSI_ISR_SPFIFOF_MASK |        \
> > +                                XCSI_ISR_SPFIFONE_MASK)
> > +
> > +#define XCSI_INTR_FRAMERCVD_MASK       (XCSI_ISR_FR_MASK)
> > +
> > +#define XCSI_INTR_ERR_MASK     (XCSI_ISR_ILC_MASK |    \
> > +                                XCSI_ISR_SLBF_MASK |   \
> > +                                XCSI_ISR_STOP_MASK)
> > +
> > +#define XCSI_IER_OFFSET                        0x00000028
> > +#define XCSI_IER_FR_SHIFT              31
> > +#define XCSI_IER_ILC_SHIFT             21
> > +#define XCSI_IER_SPFIFOF_SHIFT         20
> > +#define XCSI_IER_SPFIFONE_SHIFT                19
> > +#define XCSI_IER_SLBF_SHIFT            18
> > +#define XCSI_IER_STOP_SHIFT            17
> > +#define XCSI_IER_SOTERR_SHIFT          13
> > +#define XCSI_IER_SOTSYNCERR_SHIFT      12
> > +#define XCSI_IER_ECC2BERR_SHIFT                11
> > +#define XCSI_IER_ECC1BERR_SHIFT                10
> > +#define XCSI_IER_CRCERR_SHIFT          9
> > +#define XCSI_IER_DATAIDERR_SHIFT       8
> > +#define XCSI_IER_VC3FSYNCERR_SHIFT     7
> > +#define XCSI_IER_VC3FLVLERR_SHIFT      6
> > +#define XCSI_IER_VC2FSYNCERR_SHIFT     5
> > +#define XCSI_IER_VC2FLVLERR_SHIFT      4
> > +#define XCSI_IER_VC1FSYNCERR_SHIFT     3
> > +#define XCSI_IER_VC1FLVLERR_SHIFT      2
> > +#define XCSI_IER_VC0FSYNCERR_SHIFT     1
> > +#define XCSI_IER_VC0FLVLERR_SHIFT      0
> > +#define XCSI_IER_FR_MASK               BIT(XCSI_IER_FR_SHIFT)
> > +#define XCSI_IER_ILC_MASK              BIT(XCSI_IER_ILC_SHIFT)
> > +#define XCSI_IER_SPFIFOF_MASK          BIT(XCSI_IER_SPFIFOF_SHIFT)
> > +#define XCSI_IER_SPFIFONE_MASK         BIT(XCSI_IER_SPFIFONE_SHIFT)
> > +#define XCSI_IER_SLBF_MASK             BIT(XCSI_IER_SLBF_SHIFT)
> > +#define XCSI_IER_STOP_MASK             BIT(XCSI_IER_STOP_SHIFT)
> > +#define XCSI_IER_SOTERR_MASK           BIT(XCSI_IER_SOTERR_SHIFT)
> > +#define XCSI_IER_SOTSYNCERR_MASK       BIT(XCSI_IER_SOTSYNCERR_SHIFT)
> > +#define XCSI_IER_ECC2BERR_MASK         BIT(XCSI_IER_ECC2BERR_SHIFT)
> > +#define XCSI_IER_ECC1BERR_MASK         BIT(XCSI_IER_ECC1BERR_SHIFT)
> > +#define XCSI_IER_CRCERR_MASK           BIT(XCSI_IER_CRCERR_SHIFT)
> > +#define XCSI_IER_DATAIDERR_MASK
> BIT(XCSI_IER_DATAIDERR_SHIFT)
> > +#define XCSI_IER_VC3FSYNCERR_MASK
> BIT(XCSI_IER_VC3FSYNCERR_SHIFT)
> > +#define XCSI_IER_VC3FLVLERR_MASK       BIT(XCSI_IER_VC3FLVLERR_SHIFT)
> > +#define XCSI_IER_VC2FSYNCERR_MASK
> BIT(XCSI_IER_VC2FSYNCERR_SHIFT)
> > +#define XCSI_IER_VC2FLVLERR_MASK       BIT(XCSI_IER_VC2FLVLERR_SHIFT)
> > +#define XCSI_IER_VC1FSYNCERR_MASK
> BIT(XCSI_IER_VC1FSYNCERR_SHIFT)
> > +#define XCSI_IER_VC1FLVLERR_MASK       BIT(XCSI_IER_VC1FLVLERR_SHIFT)
> > +#define XCSI_IER_VC0FSYNCERR_MASK
> BIT(XCSI_IER_VC0FSYNCERR_SHIFT)
> > +#define XCSI_IER_VC0FLVLERR_MASK       BIT(XCSI_IER_VC0FLVLERR_SHIFT)
> > +#define XCSI_IER_ALLINTR_MASK          0x803FFFFF
> > +
> > +#define XCSI_SPKTR_OFFSET              0x00000030
> > +#define XCSI_SPKTR_DATA_SHIFT          8
> > +#define XCSI_SPKTR_VC_SHIFT            6
> > +#define XCSI_SPKTR_DT_SHIFT            0
> > +#define XCSI_SPKTR_DATA_MASK           0x00FFFF00
> > +#define XCSI_SPKTR_VC_MASK             0x000000C0
> > +#define XCSI_SPKTR_DT_MASK             0x0000003F
> > +
> > +#define XCSI_CLKINFR_OFFSET            0x0000003C
> > +#define XCSI_CLKINFR_STOP_SHIFT                1
> > +#define XCSI_CLKINFR_STOP_MASK         BIT(XCSI_CLKINFR_STOP_SHIFT)
> > +
> > +#define XCSI_L0INFR_OFFSET             0x00000040
> > +#define XCSI_L1INFR_OFFSET             0x00000044
> > +#define XCSI_L2INFR_OFFSET             0x00000048
> > +#define XCSI_L3INFR_OFFSET             0x0000004C
> > +#define XCSI_LXINFR_STOP_SHIFT         5
> > +#define XCSI_LXINFR_SOTERR_SHIFT       1
> > +#define XCSI_LXINFR_SOTSYNCERR_SHIFT   0
> > +#define XCSI_LXINFR_STOP_MASK          BIT(XCSI_LXINFR_STOP_SHIFT)
> > +#define XCSI_LXINFR_SOTERR_MASK
> BIT(XCSI_LXINFR_SOTERR_SHIFT)
> > +#define XCSI_LXINFR_SOTSYNCERR_MASK
> BIT(XCSI_LXINFR_SOTSYNCERR_SHIFT)
> > +
> > +#define XCSI_VC0INF1R_OFFSET           0x00000060
> > +#define XCSI_VC1INF1R_OFFSET           0x00000068
> > +#define XCSI_VC2INF1R_OFFSET           0x00000070
> > +#define XCSI_VC3INF1R_OFFSET           0x00000078
> > +#define XCSI_VCXINF1R_LINECOUNT_SHIFT  16
> > +#define XCSI_VCXINF1R_BYTECOUNT_SHIFT  0
> > +#define XCSI_VCXINF1R_LINECOUNT_MASK   0xFFFF0000
> > +#define XCSI_VCXINF1R_BYTECOUNT_MASK   0x0000FFFF
> > +
> > +#define XCSI_VC0INF2R_OFFSET           0x00000064
> > +#define XCSI_VC1INF2R_OFFSET           0x0000006C
> > +#define XCSI_VC2INF2R_OFFSET           0x00000074
> > +#define XCSI_VC3INF2R_OFFSET           0x0000007C
> > +#define XCSI_VCXINF2R_DATATYPE_SHIFT   0
> > +#define XCSI_VCXINF2R_DATATYPE_MASK    0x0000003F
> > +
> > +#define XDPHY_CTRLREG_OFFSET           0x0
> > +#define XDPHY_CTRLREG_DPHYEN_SHIFT     1
> > +#define XDPHY_CTRLREG_DPHYEN_MASK
> BIT(XDPHY_CTRLREG_DPHYEN_SHIFT)
> > +
> > +#define XDPHY_CLKSTATREG_OFFSET                0x18
> > +#define XDPHY_CLKSTATREG_MODE_SHIFT    0
> > +#define XDPHY_CLKSTATREG_MODE_MASK     0x3
> > +#define XDPHY_LOW_POWER_MODE           0x0
> > +#define XDPHY_HI_SPEED_MODE            0x1
> > +#define XDPHY_ESC_MODE                 0x2
> > +
> > +/*
> > + * Interrupt mask
> > + */
> > +#define XCSI_INTR_MASK         (XCSI_ISR_ALLINTR_MASK &
> ~XCSI_ISR_STOP_MASK)
> > +/*
> > + * Timeout for reset
> > + */
> > +#define XCSI_TIMEOUT_VAL       (1000) /* us */
> 
> No need for parentheses here or below.

Ok. Will remove these in next version.

> 
> > +
> > +/*
> > + * Max string length for CSI Data type string
> > + */
> > +#define MAX_XIL_CSIDT_STR_LENGTH 64
> > +
> > +/*
> > + * Maximum number of short packet events per file handle.
> > + */
> > +#define XCSI_MAX_SPKT          (512)
> > +
> > +/* Number of media pads */
> > +#define XILINX_CSI_MEDIA_PADS  (2)
> > +
> > +#define XCSI_DEFAULT_WIDTH     (1920)
> > +#define XCSI_DEFAULT_HEIGHT    (1080)
> > +
> > +/*
> > + * Macro to return "true" or "false" string if bit is set
> > + */
> > +#define XCSI_GET_BITSET_STR(val, mask) (val) & (mask) ? "true" : "false"
> > +
> > +enum csi_datatypes {
> > +       MIPI_CSI_DT_FRAME_START_CODE = 0x00,
> > +       MIPI_CSI_DT_FRAME_END_CODE,
> > +       MIPI_CSI_DT_LINE_START_CODE,
> > +       MIPI_CSI_DT_LINE_END_CODE,
> > +       MIPI_CSI_DT_SYNC_RSVD_04,
> > +       MIPI_CSI_DT_SYNC_RSVD_05,
> > +       MIPI_CSI_DT_SYNC_RSVD_06,
> > +       MIPI_CSI_DT_SYNC_RSVD_07,
> > +       MIPI_CSI_DT_GSPKT_08,
> > +       MIPI_CSI_DT_GSPKT_09,
> > +       MIPI_CSI_DT_GSPKT_0A,
> > +       MIPI_CSI_DT_GSPKT_0B,
> > +       MIPI_CSI_DT_GSPKT_0C,
> > +       MIPI_CSI_DT_GSPKT_0D,
> > +       MIPI_CSI_DT_GSPKT_0E,
> > +       MIPI_CSI_DT_GSPKT_0F,
> > +       MIPI_CSI_DT_GLPKT_10,
> > +       MIPI_CSI_DT_GLPKT_11,
> > +       MIPI_CSI_DT_GLPKT_12,
> > +       MIPI_CSI_DT_GLPKT_13,
> > +       MIPI_CSI_DT_GLPKT_14,
> > +       MIPI_CSI_DT_GLPKT_15,
> > +       MIPI_CSI_DT_GLPKT_16,
> > +       MIPI_CSI_DT_GLPKT_17,
> > +       MIPI_CSI_DT_YUV_420_8B,
> > +       MIPI_CSI_DT_YUV_420_10B,
> > +       MIPI_CSI_DT_YUV_420_8B_LEGACY,
> > +       MIPI_CSI_DT_YUV_RSVD,
> > +       MIPI_CSI_DT_YUV_420_8B_CSPS,
> > +       MIPI_CSI_DT_YUV_420_10B_CSPS,
> > +       MIPI_CSI_DT_YUV_422_8B,
> > +       MIPI_CSI_DT_YUV_422_10B,
> > +       MIPI_CSI_DT_RGB_444,
> > +       MIPI_CSI_DT_RGB_555,
> > +       MIPI_CSI_DT_RGB_565,
> > +       MIPI_CSI_DT_RGB_666,
> > +       MIPI_CSI_DT_RGB_888,
> > +       MIPI_CSI_DT_RGB_RSVD_25,
> > +       MIPI_CSI_DT_RGB_RSVD_26,
> > +       MIPI_CSI_DT_RGB_RSVD_27,
> > +       MIPI_CSI_DT_RAW_6,
> > +       MIPI_CSI_DT_RAW_7,
> > +       MIPI_CSI_DT_RAW_8,
> > +       MIPI_CSI_DT_RAW_10,
> > +       MIPI_CSI_DT_RAW_12,
> > +       MIPI_CSI_DT_RAW_14,
> > +       MIPI_CSI_DT_RAW_RSVD_2E,
> > +       MIPI_CSI_DT_RAW_RSVD_2F,
> > +       MIPI_CSI_DT_USER_30,
> > +       MIPI_CSI_DT_USER_31,
> > +       MIPI_CSI_DT_USER_32,
> > +       MIPI_CSI_DT_USER_33,
> > +       MIPI_CSI_DT_USER_34,
> > +       MIPI_CSI_DT_USER_35,
> > +       MIPI_CSI_DT_USER_36,
> > +       MIPI_CSI_DT_USER_37,
> > +       MIPI_CSI_DT_RSVD_38,
> > +       MIPI_CSI_DT_RSVD_39,
> > +       MIPI_CSI_DT_RSVD_3A,
> > +       MIPI_CSI_DT_RSVD_3B,
> > +       MIPI_CSI_DT_RSVD_3C,
> > +       MIPI_CSI_DT_RSVD_3D,
> > +       MIPI_CSI_DT_RSVD_3E,
> > +       MIPI_CSI_DT_RSVD_3F
> > +};
> > +
> > +/**
> > + * struct pixel_format - Data Type to string name structure
> > + * @pixelformat: MIPI CSI2 Data type
> > + * @pixelformatstr: String name of Data Type
> > + */
> > +struct pixel_format {
> > +       enum csi_datatypes pixelformat;
> > +       char pixelformatstr[MAX_XIL_CSIDT_STR_LENGTH];
> > +};
> > +
> > +/**
> > + * struct xcsi2rxss_event - Event log structure
> > + * @mask: Event mask
> > + * @name: Name of the event
> > + * @counter: Count number of events
> > + */
> > +struct xcsi2rxss_event {
> > +       u32 mask;
> > +       const char * const name;
> > +       unsigned int counter;
> > +};
> > +
> > +/*
> > + * struct xcsi2rxss_core - Core configuration CSI2 Rx Subsystem device
> structure
> > + * @dev: Platform structure
> > + * @iomem: Base address of subsystem
> > + * @irq: requested irq number
> > + * @dphy_present: Flag for DPHY register interface presence
> > + * @dphy_offset: DPHY registers offset
> 
> Is the D-PHY a part of the same device, or is it effectively a separate
> device? Maxime has posted a patchset for PHY control so this could be a
> candidate user for that:
> 
> <URL:https://lkml.org/lkml/2019/1/9/224>
> 

The DPHY is part of the same device. But to save resource count on FPGA, its values may be fixed and 
Register interface disabled.

> > + * @enable_active_lanes: If number of active lanes can be modified
> > + * @max_num_lanes: Maximum number of lanes present
> > + * @vfb: Video Format Bridge enabled or not
> > + * @ppc: pixels per clock
> > + * @vc: Virtual Channel
> > + * @axis_tdata_width: AXI Stream data width
> > + * @datatype: Data type filter
> > + * @pxlformat: String with CSI pixel format from IP
> > + * @num_lanes: Number of lanes requested from application
> > + * @events: Structure to maintain event logs
> > + */
> > +struct xcsi2rxss_core {
> > +       struct device *dev;
> > +       void __iomem *iomem;
> > +       int irq;
> > +       u32 dphy_offset;
> > +       bool dphy_present;
> > +       bool enable_active_lanes;
> > +       u32 max_num_lanes;
> > +       bool vfb;
> > +       u32 ppc;
> > +       u32 vc;
> > +       u32 axis_tdata_width;
> > +       u32 datatype;
> > +       const char *pxlformat;
> > +       u32 num_lanes;
> > +       struct xcsi2rxss_event *events;
> > +};
> > +
> > +/**
> > + * struct xcsi2rxss_state - CSI2 Rx Subsystem device structure
> > + * @core: Core structure for MIPI CSI2 Rx Subsystem
> > + * @subdev: The v4l2 subdev structure
> > + * @ctrl_handler: control handler
> > + * @formats: Active V4L2 formats on each pad
> > + * @default_format: default V4L2 media bus format
> > + * @vip_format: format information corresponding to the active format
> > + * @event: Holds the short packet event
> > + * @lock: mutex for serializing operations
> > + * @pads: media pads
> > + * @npads: number of pads
> > + * @streaming: Flag for storing streaming state
> > + * @suspended: Flag for storing suspended state
> > + *
> > + * This structure contains the device driver related parameters
> > + */
> > +struct xcsi2rxss_state {
> > +       struct xcsi2rxss_core core;
> > +       struct v4l2_subdev subdev;
> > +       struct v4l2_ctrl_handler ctrl_handler;
> > +       struct v4l2_mbus_framefmt formats[2];
> > +       struct v4l2_mbus_framefmt default_format;
> > +       const struct xvip_video_format *vip_format;
> > +       struct v4l2_event event;
> > +       /*
> > +        * Used to serialize access.
> > +        */
> 
> This comment seems redundant.

Ok I will update this in next version to say that it serializes access to different v4l subdev functions.

> 
> > +       struct mutex lock;
> > +       struct media_pad pads[XILINX_CSI_MEDIA_PADS];
> > +       unsigned int npads;
> > +       bool streaming;
> > +       bool suspended;
> > +};
> > +
> > +static inline struct xcsi2rxss_state *
> > +to_xcsi2rxssstate(struct v4l2_subdev *subdev)
> > +{
> > +       return container_of(subdev, struct xcsi2rxss_state, subdev);
> > +}
> > +
> > +/*
> > + * Register related operations
> > + */
> > +static inline u32 xcsi2rxss_read(struct xcsi2rxss_core *xcsi2rxss,
> > +                                u32 addr)
> > +{
> > +       return ioread32(xcsi2rxss->iomem + addr);
> > +}
> > +
> > +static inline void xcsi2rxss_write(struct xcsi2rxss_core *xcsi2rxss,
> > +                                  u32 addr, u32 value)
> > +{
> > +       iowrite32(value, xcsi2rxss->iomem + addr);
> > +}
> > +
> > +static inline void xcsi2rxss_clr(struct xcsi2rxss_core *xcsi2rxss,
> > +                                u32 addr, u32 clr)
> > +{
> > +       xcsi2rxss_write(xcsi2rxss,
> > +                       addr,
> 
> Fits on previous line.

Ok. I will move this and other instances to previous line in next version.
I added like this as it makes it clear to count the number of arguments passed to the function.

> 
> > +                       xcsi2rxss_read(xcsi2rxss, addr) & ~clr);
> > +}
> > +
> > +static inline void xcsi2rxss_set(struct xcsi2rxss_core *xcsi2rxss,
> > +                                u32 addr, u32 set)
> > +{
> > +       xcsi2rxss_write(xcsi2rxss,
> > +                       addr,
> 
> Ditto.
> 
> > +                       xcsi2rxss_read(xcsi2rxss, addr) | set);
> > +}
> > +
> > +static const struct pixel_format pixel_formats[] = {
> > +       { MIPI_CSI_DT_YUV_420_8B, "YUV420_8bit" },
> > +       { MIPI_CSI_DT_YUV_420_10B, "YUV420_10bit" },
> > +       { MIPI_CSI_DT_YUV_420_8B_LEGACY, "Legacy_YUV420_8bit" },
> > +       { MIPI_CSI_DT_YUV_420_8B_CSPS, "YUV420_8bit_CSPS" },
> > +       { MIPI_CSI_DT_YUV_420_10B_CSPS, "YUV420_10bit_CSPS" },
> > +       { MIPI_CSI_DT_YUV_422_8B, "YUV422_8bit" },
> > +       { MIPI_CSI_DT_YUV_422_10B, "YUV422_10bit" },
> > +       { MIPI_CSI_DT_RGB_444, "RGB444" },
> > +       { MIPI_CSI_DT_RGB_555, "RGB555" },
> > +       { MIPI_CSI_DT_RGB_565, "RGB565" },
> > +       { MIPI_CSI_DT_RGB_666, "RGB666" },
> > +       { MIPI_CSI_DT_RGB_888, "RGB888" },
> > +       { MIPI_CSI_DT_RAW_6, "RAW6" },
> > +       { MIPI_CSI_DT_RAW_7, "RAW7" },
> > +       { MIPI_CSI_DT_RAW_8, "RAW8" },
> > +       { MIPI_CSI_DT_RAW_10, "RAW10" },
> > +       { MIPI_CSI_DT_RAW_12, "RAW12" },
> > +       { MIPI_CSI_DT_RAW_14, "RAW14 "}
> > +};
> > +
> > +static struct xcsi2rxss_event xcsi2rxss_events[] = {
> > +       { XCSI_ISR_FR_MASK, "Frame Received", 0 },
> > +       { XCSI_ISR_ILC_MASK, "Invalid Lane Count Error", 0 },
> > +       { XCSI_ISR_SPFIFOF_MASK, "Short Packet FIFO OverFlow Error", 0 },
> > +       { XCSI_ISR_SPFIFONE_MASK, "Short Packet FIFO Not Empty", 0 },
> > +       { XCSI_ISR_SLBF_MASK, "Streamline Buffer Full Error", 0 },
> > +       { XCSI_ISR_STOP_MASK, "Lane Stop State", 0 },
> > +       { XCSI_ISR_SOTERR_MASK, "SOT Error", 0 },
> > +       { XCSI_ISR_SOTSYNCERR_MASK, "SOT Sync Error", 0 },
> > +       { XCSI_ISR_ECC2BERR_MASK, "2 Bit ECC Unrecoverable Error", 0 },
> > +       { XCSI_ISR_ECC1BERR_MASK, "1 Bit ECC Recoverable Error", 0 },
> > +       { XCSI_ISR_CRCERR_MASK, "CRC Error", 0 },
> > +       { XCSI_ISR_DATAIDERR_MASK, "Data Id Error", 0 },
> > +       { XCSI_ISR_VC3FSYNCERR_MASK, "Virtual Channel 3 Frame Sync Error",
> 0 },
> > +       { XCSI_ISR_VC3FLVLERR_MASK, "Virtual Channel 3 Frame Level Error", 0
> },
> > +       { XCSI_ISR_VC2FSYNCERR_MASK, "Virtual Channel 2 Frame Sync Error",
> 0 },
> > +       { XCSI_ISR_VC2FLVLERR_MASK, "Virtual Channel 2 Frame Level Error", 0
> },
> > +       { XCSI_ISR_VC1FSYNCERR_MASK, "Virtual Channel 1 Frame Sync Error",
> 0 },
> > +       { XCSI_ISR_VC1FLVLERR_MASK, "Virtual Channel 1 Frame Level Error", 0
> },
> > +       { XCSI_ISR_VC0FSYNCERR_MASK, "Virtual Channel 0 Frame Sync Error",
> 0 },
> > +       { XCSI_ISR_VC0FLVLERR_MASK, "Virtual Channel 0 Frame Level Error", 0
> }
> > +};
> > +
> > +#define XMIPICSISS_NUM_EVENTS ARRAY_SIZE(xcsi2rxss_events)
> > +
> > +/**
> > + * xcsi2rxss_clr_and_set - Clear and set the register with a bitmask
> > + * @xcsi2rxss: Xilinx MIPI CSI2 Rx Subsystem subdev core struct
> > + * @addr: address of register
> > + * @clr: bitmask to be cleared
> > + * @set: bitmask to be set
> > + *
> > + * Clear a bit(s) of mask @clr in the register at address @addr, then set
> > + * a bit(s) of mask @set in the register after.
> > + */
> > +static void xcsi2rxss_clr_and_set(struct xcsi2rxss_core *xcsi2rxss,
> > +                                 u32 addr, u32 clr, u32 set)
> > +{
> > +       u32 reg;
> > +
> > +       reg = xcsi2rxss_read(xcsi2rxss, addr);
> > +       reg &= ~clr;
> > +       reg |= set;
> > +       xcsi2rxss_write(xcsi2rxss, addr, reg);
> > +}
> > +
> > +/**
> > + * xcsi2rxss_pxlfmtstrtodt - Convert pixel format string got from dts
> > + * to data type.
> > + * @pxlfmtstr: String obtained while parsing device node
> > + *
> > + * This function takes a CSI pixel format string obtained while parsing
> > + * device tree node and converts it to data type.
> > + *
> > + * Eg. "RAW8" string is converted to 0x2A.
> > + * Refer to MIPI CSI2 specification for details.
> > + *
> > + * Return: Equivalent pixel format value from table
> > + */
> > +static u32 xcsi2rxss_pxlfmtstrtodt(const char *pxlfmtstr)
> > +{
> > +       u32 i;
> > +       u32 maxentries = ARRAY_SIZE(pixel_formats);
> > +
> > +       for (i = 0; i < maxentries; i++) {
> > +               if (!strncmp(pixel_formats[i].pixelformatstr,
> > +                            pxlfmtstr, MAX_XIL_CSIDT_STR_LENGTH))
> > +                       return pixel_formats[i].pixelformat;
> > +       }
> > +
> > +       return -EINVAL;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_pxlfmtdttostr - Convert pixel format data type to string.
> > + * @datatype: MIPI CSI-2 Data Type
> > + *
> > + * This function takes a CSI pixel format data type and returns a
> > + * pointer to the string name.
> > + *
> > + * Eg. 0x2A returns "RAW8" string.
> > + * Refer to MIPI CSI2 specification for details.
> > + *
> > + * Return: Equivalent pixel format string from table
> > + */
> > +static const char *xcsi2rxss_pxlfmtdttostr(u32 datatype)
> > +{
> > +       u32 i;
> > +       u32 maxentries = ARRAY_SIZE(pixel_formats);
> > +
> > +       for (i = 0; i < maxentries; i++) {
> > +               if (pixel_formats[i].pixelformat == datatype)
> > +                       return pixel_formats[i].pixelformatstr;
> > +       }
> > +
> > +       return NULL;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_enable - Enable or disable the CSI Core
> > + * @core: Core Xilinx CSI2 Rx Subsystem structure pointer
> > + * @flag: true for enabling, false for disabling
> > + *
> > + * This function enables/disables the MIPI CSI2 Rx Subsystem core.
> > + * After enabling the CSI2 Rx core, the DPHY is enabled in case the
> > + * register interface for it is present.
> > + */
> > +static void xcsi2rxss_enable(struct xcsi2rxss_core *core, bool flag)
> > +{
> > +       u32 dphyctrlregoffset = core->dphy_offset + XDPHY_CTRLREG_OFFSET;
> > +
> > +       if (flag) {
> > +               xcsi2rxss_write(core, XCSI_CCR_OFFSET,
> XCSI_CCR_COREENB_MASK);
> > +               if (core->dphy_present)
> > +                       xcsi2rxss_write(core, dphyctrlregoffset,
> > +                                       XDPHY_CTRLREG_DPHYEN_MASK);
> > +       } else {
> > +               xcsi2rxss_write(core, XCSI_CCR_OFFSET, 0);
> > +               if (core->dphy_present)
> > +                       xcsi2rxss_write(core, dphyctrlregoffset, 0);
> > +       }
> > +}
> > +
> > +/**
> > + * xcsi2rxss_interrupts_enable - Enable or disable CSI interrupts
> > + * @core: Core Xilinx CSI2 Rx Subsystem structure pointer
> > + * @flag: true for enabling, false for disabling
> > + *
> > + * This function enables/disables the interrupts for the MIPI CSI2
> > + * Rx Subsystem.
> > + */
> > +static void xcsi2rxss_interrupts_enable(struct xcsi2rxss_core *core, bool
> flag)
> > +{
> > +       if (flag) {
> > +               xcsi2rxss_clr(core, XCSI_GIER_OFFSET, XCSI_GIER_GIE_MASK);
> > +               xcsi2rxss_write(core, XCSI_IER_OFFSET, XCSI_INTR_MASK);
> > +               xcsi2rxss_set(core, XCSI_GIER_OFFSET, XCSI_GIER_GIE_MASK);
> > +       } else {
> > +               xcsi2rxss_clr(core, XCSI_IER_OFFSET, XCSI_INTR_MASK);
> > +               xcsi2rxss_clr(core, XCSI_GIER_OFFSET, XCSI_GIER_GIE_MASK);
> > +       }
> > +}
> > +
> > +/**
> > + * xcsi2rxss_reset - Does a soft reset of the MIPI CSI2 Rx Subsystem
> > + * @core: Core Xilinx CSI2 Rx Subsystem structure pointer
> > + *
> > + * Return: 0 - on success OR -ETIME if reset times out
> > + */
> > +static int xcsi2rxss_reset(struct xcsi2rxss_core *core)
> > +{
> > +       u32 timeout = XCSI_TIMEOUT_VAL;
> > +
> > +       xcsi2rxss_set(core, XCSI_CCR_OFFSET, XCSI_CCR_SOFTRESET_MASK);
> > +
> > +       while (xcsi2rxss_read(core, XCSI_CSR_OFFSET) &
> XCSI_CSR_RIPCD_MASK) {
> > +               if (timeout == 0) {
> > +                       dev_err(core->dev, "Xilinx CSI2 Rx Subsystem Soft Reset
> Timeout!\n");
> > +                       return -ETIME;
> > +               }
> > +
> > +               timeout--;
> > +               udelay(1);
> > +       }
> > +
> > +       xcsi2rxss_clr(core, XCSI_CCR_OFFSET, XCSI_CCR_SOFTRESET_MASK);
> > +       return 0;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_irq_handler - Interrupt handler for CSI-2
> > + * @irq: IRQ number
> > + * @dev_id: Pointer to device state
> > + *
> > + * In the interrupt handler, a list of event counters are updated for
> > + * corresponding interrupts. This is useful to get status / debug.
> > + * If the short packet FIFO not empty or overflow interrupt is received
> > + * capture the short packet and notify of event occurrence
> > + *
> > + * Return: IRQ_HANDLED after handling interrupts
> > + */
> > +static irqreturn_t xcsi2rxss_irq_handler(int irq, void *dev_id)
> > +{
> > +       struct xcsi2rxss_state *state = (struct xcsi2rxss_state *)dev_id;
> > +       struct xcsi2rxss_core *core = &state->core;
> > +       u32 status;
> > +
> > +       status = xcsi2rxss_read(core, XCSI_ISR_OFFSET) & XCSI_INTR_MASK;
> > +       dev_dbg(core->dev, "interrupt status = 0x%08x\n", status);
> > +
> > +       if (!status)
> > +               return IRQ_NONE;
> > +
> > +       if (status & XCSI_ISR_SPFIFONE_MASK) {
> > +               memset(&state->event, 0, sizeof(state->event));
> > +
> > +               state->event.type = V4L2_EVENT_XLNXCSIRX_SPKT;
> > +
> > +               *((u32 *)(&state->event.u.data)) =
> > +                       xcsi2rxss_read(core, XCSI_SPKTR_OFFSET);
> > +
> > +               v4l2_subdev_notify_event(&state->subdev, &state->event);
> > +       }
> > +
> > +       if (status & XCSI_ISR_SPFIFOF_MASK) {
> > +               dev_alert(core->dev, "Short packet FIFO overflowed\n");
> > +
> > +               memset(&state->event, 0, sizeof(state->event));
> > +
> > +               state->event.type = V4L2_EVENT_XLNXCSIRX_SPKT_OVF;
> > +
> > +               v4l2_subdev_notify_event(&state->subdev, &state->event);
> > +       }
> > +
> > +       if (status & XCSI_ISR_SLBF_MASK) {
> > +               dev_alert(core->dev, "Stream Line Buffer Full!\n");
> > +
> > +               memset(&state->event, 0, sizeof(state->event));
> > +
> > +               state->event.type = V4L2_EVENT_XLNXCSIRX_SLBF;
> > +
> > +               v4l2_subdev_notify_event(&state->subdev, &state->event);
> > +       }
> 
> This is really low level stuff. What would be the purpose of informing the
> user space on individual short or long packets? Other CSI-2 receiver
> drivers don't do it either.
> 

Refer to section 9.9 line 867 - 871 in specification for CSI-2 version 2.0 07-Dec-2016 for details.
This is to send Generic Short packets (Data Type 0x08 to 0x0F) containing information like 
opening/closing of shutters, triggering flashes, etc to application layer.
Other short packets like Frame Start/end, Line start/end, etc aren't sent to application layer.

> > +
> > +       if (status & XCSI_ISR_ALLINTR_MASK) {
> > +               unsigned int i;
> > +
> > +               for (i = 0; i < XMIPICSISS_NUM_EVENTS; i++) {
> > +                       if (!(status & core->events[i].mask))
> > +                               continue;
> > +                       core->events[i].counter++;
> > +                       dev_dbg(core->dev, "%s: %d\n", core->events[i].name,
> > +                               core->events[i].counter);
> > +               }
> > +       }
> > +
> > +       xcsi2rxss_write(core, XCSI_ISR_OFFSET, status);
> > +
> > +       return IRQ_HANDLED;
> > +}
> > +
> > +static void xcsi2rxss_reset_event_counters(struct xcsi2rxss_state *state)
> > +{
> > +       u32 i;
> > +
> > +       for (i = 0; i < XMIPICSISS_NUM_EVENTS; i++)
> > +               state->core.events[i].counter = 0;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_log_counters - Print out the event counters.
> > + * @state: Pointer to device state
> > + *
> > + */
> > +static void xcsi2rxss_log_counters(struct xcsi2rxss_state *state)
> > +{
> > +       u32 i;
> > +
> > +       for (i = 0; i < XMIPICSISS_NUM_EVENTS; i++) {
> > +               if (state->core.events[i].counter > 0)
> > +                       v4l2_info(&state->subdev, "%s events: %d\n",
> > +                                 state->core.events[i].name,
> > +                                 state->core.events[i].counter);
> > +       }
> > +}
> > +
> > +/**
> > + * xcsi2rxss_log_status - Logs the status of the CSI-2 Receiver
> > + * @sd: Pointer to V4L2 subdevice structure
> > + *
> > + * This function prints the current status of Xilinx MIPI CSI-2
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_log_status(struct v4l2_subdev *sd)
> > +{
> > +       struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +       struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > +       u32 reg, data, i;
> 
> unsigned int is fine for counters unless you specifically need a type such
> as u32.
> 

Ok. Will update in next version.

> > +
> > +       mutex_lock(&xcsi2rxss->lock);
> > +
> > +       xcsi2rxss_log_counters(xcsi2rxss);
> > +
> > +       v4l2_info(sd, "***** Core Status *****\n");
> 
> Please use either v4l2_*() or dev_*() macros to print stuff but not both.

Ok. I will update it in next version.

> 
> > +       data = xcsi2rxss_read(core, XCSI_CSR_OFFSET);
> > +       v4l2_info(sd, "Short Packet FIFO Full = %s\n",
> > +                 XCSI_GET_BITSET_STR(data, XCSI_CSR_SPFIFOFULL_MASK));
> > +       v4l2_info(sd, "Short Packet FIFO Not Empty = %s\n",
> > +                 XCSI_GET_BITSET_STR(data, XCSI_CSR_SPFIFONE_MASK));
> > +       v4l2_info(sd, "Stream line buffer full = %s\n",
> > +                 XCSI_GET_BITSET_STR(data, XCSI_CSR_SLBF_MASK));
> > +       v4l2_info(sd, "Soft reset/Core disable in progress = %s\n",
> > +                 XCSI_GET_BITSET_STR(data, XCSI_CSR_RIPCD_MASK));
> > +
> > +       /* Clk & Lane Info  */
> > +       v4l2_info(sd, "******** Clock Lane Info *********\n");
> > +       data = xcsi2rxss_read(core, XCSI_CLKINFR_OFFSET);
> > +       v4l2_info(sd, "Clock Lane in Stop State = %s\n",
> > +                 XCSI_GET_BITSET_STR(data, XCSI_CLKINFR_STOP_MASK));
> > +
> > +       v4l2_info(sd, "******** Data Lane Info *********\n");
> > +       v4l2_info(sd, "Lane\tSoT Error\tSoT Sync Error\tStop State\n");
> > +       reg = XCSI_L0INFR_OFFSET;
> > +       for (i = 0; i < 4; i++) {
> 
> It'd be nice to have a humna-readable name for 4?

Yes. It was the number of Lanes. I will add a macro for it.

> 
> > +               data = xcsi2rxss_read(core, reg);
> > +
> > +               v4l2_info(sd, "%d\t%s\t\t%s\t\t%s\n",
> > +                         i,
> > +                         XCSI_GET_BITSET_STR(data, XCSI_LXINFR_SOTERR_MASK),
> > +                         data & XCSI_LXINFR_SOTSYNCERR_MASK ? "true" : "false",
> > +                         XCSI_GET_BITSET_STR(data, XCSI_LXINFR_STOP_MASK));
> > +
> > +               reg += 4;
> > +       }
> > +
> > +       /* Virtual Channel Image Information */
> > +       v4l2_info(sd, "********** Virtual Channel Info ************\n");
> > +       v4l2_info(sd, "VC\tLine Count\tByte Count\tData Type\n");
> > +       reg = XCSI_VC0INF1R_OFFSET;
> > +       for (i = 0; i < 4; i++) {
> > +               u32 line_count, byte_count, data_type;
> > +               char *datatypestr;
> > +
> > +               /* Get line and byte count from VCXINFR1 Register */
> > +               data = xcsi2rxss_read(core, reg);
> > +               byte_count = (data & XCSI_VCXINF1R_BYTECOUNT_MASK) >>
> > +                               XCSI_VCXINF1R_BYTECOUNT_SHIFT;
> > +               line_count = (data & XCSI_VCXINF1R_LINECOUNT_MASK) >>
> > +                               XCSI_VCXINF1R_LINECOUNT_SHIFT;
> > +
> > +               /* Get data type from VCXINFR2 Register */
> > +               reg += 4;
> > +               data = xcsi2rxss_read(core, reg);
> > +               data_type = (data & XCSI_VCXINF2R_DATATYPE_MASK) >>
> > +                               XCSI_VCXINF2R_DATATYPE_SHIFT;
> > +               datatypestr = (char *)xcsi2rxss_pxlfmtdttostr(data_type);
> > +
> > +               v4l2_info(sd, "%d\t%d\t\t%d\t\t%s\n",
> > +                         i, line_count, byte_count, datatypestr);
> > +
> > +               /* Move to next pair of VC Info registers */
> > +               reg += 4;
> > +       }
> > +
> > +       mutex_unlock(&xcsi2rxss->lock);
> > +
> > +       return 0;
> > +}
> > +
> > +/*
> > + * xcsi2rxss_subscribe_event - Subscribe to the custom short packet
> > + * receive event.
> > + * @sd: V4L2 Sub device
> > + * @fh: V4L2 File Handle
> > + * @sub: Subcribe event structure
> > + *
> > + * There are two types of events to be subscribed.
> > + *
> > + * First is to register for receiving a short packet.
> > + * The short packets received are queued up in a FIFO.
> > + * On reception of a short packet, an event will be generated
> > + * with the short packet contents copied to its data area.
> > + * Application subscribed to this event will poll for POLLPRI.
> > + * On getting the event, the app dequeues the event to get the short packet
> > + * data.
> > + *
> > + * Second is to register for Short packet FIFO overflow
> > + * In case the rate of receiving short packets is high and
> > + * the short packet FIFO overflows, this event will be triggered.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_subscribe_event(struct v4l2_subdev *sd,
> > +                                    struct v4l2_fh *fh,
> > +                                    struct v4l2_event_subscription *sub)
> > +{
> > +       int ret;
> 
> Please declare return values, temporary variables etc. as last.

Ok. I will update this and others in next version.

> 
> > +       struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > +       mutex_lock(&xcsi2rxss->lock);
> > +
> > +       switch (sub->type) {
> > +       case V4L2_EVENT_XLNXCSIRX_SPKT:
> > +       case V4L2_EVENT_XLNXCSIRX_SPKT_OVF:
> > +       case V4L2_EVENT_XLNXCSIRX_SLBF:
> > +               ret = v4l2_event_subscribe(fh, sub, XCSI_MAX_SPKT, NULL);
> > +               break;
> > +       default:
> > +               ret = -EINVAL;
> > +       }
> > +
> > +       mutex_unlock(&xcsi2rxss->lock);
> > +
> > +       return ret;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_unsubscribe_event - Unsubscribe from all events registered
> > + * @sd: V4L2 Sub device
> > + * @fh: V4L2 file handle
> > + * @sub: pointer to Event unsubscription structure
> > + *
> > + * Return: zero on success, else a negative error code.
> > + */
> > +static int xcsi2rxss_unsubscribe_event(struct v4l2_subdev *sd,
> > +                                      struct v4l2_fh *fh,
> > +                                      struct v4l2_event_subscription *sub)
> > +{
> > +       int ret = 0;
> > +       struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > +       mutex_lock(&xcsi2rxss->lock);
> > +       ret = v4l2_event_unsubscribe(fh, sub);
> > +       mutex_unlock(&xcsi2rxss->lock);
> > +
> > +       return ret;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_s_ctrl - This is used to set the Xilinx MIPI CSI-2 V4L2 controls
> > + * @ctrl: V4L2 control to be set
> > + *
> > + * This function is used to set the V4L2 controls for the Xilinx MIPI
> > + * CSI-2 Rx Subsystem. It is used to set the active lanes in the system.
> > + * The event counters can be reset.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > +       int ret = 0;
> > +       u32 timeout = XCSI_TIMEOUT_VAL;
> > +       u32 active_lanes = 1;
> > +
> > +       struct xcsi2rxss_state *xcsi2rxss =
> > +               container_of(ctrl->handler,
> > +                            struct xcsi2rxss_state, ctrl_handler);
> > +       struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > +
> > +       mutex_lock(&xcsi2rxss->lock);
> > +
> > +       switch (ctrl->id) {
> > +       case V4L2_CID_XILINX_MIPICSISS_ACT_LANES:
> > +               /*
> > +                * This will be called only when "Enable Active Lanes" parameter
> > +                * is set in design
> > +                */
> > +               xcsi2rxss_clr_and_set(core, XCSI_PCR_OFFSET,
> > +                                     XCSI_PCR_ACTLANES_MASK, ctrl->val - 1);
> 
> Controls is not the mechanism to choose the number of active lanes --- at
> least not on the receiver side. Please stick to the number of connected
> lanes (data-lanes property); an alternative is to use frame descriptors.
> There's a patchset around; I can find a pointer if you're interested.
> 

Ok. Please share the patchset.
This is a run time configurable property. 
We can have a design time configuration as 4 lanes but at run time config as 2 lanes depending on what the connected CSI2 Tx device supports.
Please let me know if there is a way to get this info from the upstream driver like camera sensor driver..

> > +
> > +               /*
> > +                * If the core is enabled, wait for active lanes to be
> > +                * set.
> > +                *
> > +                * If core is disabled or there is no clock from DPHY Tx
> > +                * then the read back won't reflect the updated value
> > +                * as the PPI clock will not be present.
> > +                */
> > +
> > +               if (core->dphy_present) {
> > +                       u32 dphyclkstatregoffset = core->dphy_offset +
> > +                                                       XDPHY_CLKSTATREG_OFFSET;
> > +
> > +                       u32 dphyclkstat =
> > +                               xcsi2rxss_read(core, dphyclkstatregoffset) &
> > +                                       XDPHY_CLKSTATREG_MODE_MASK;
> > +
> > +                       u32 coreenable =
> > +                               xcsi2rxss_read(core, XCSI_CCR_OFFSET) &
> > +                                              XCSI_CCR_COREENB_MASK;
> > +
> > +                       char lpmstr[] = "Low Power";
> > +                       char hsmstr[] = "High Speed";
> > +                       char esmstr[] = "Escape";
> > +                       char *modestr;
> > +
> > +                       switch (dphyclkstat) {
> > +                       case 0:
> > +                               modestr = lpmstr;
> > +                               break;
> > +                       case 1:
> > +                               modestr = hsmstr;
> > +                               break;
> > +                       case 2:
> > +                               modestr = esmstr;
> > +                               break;
> > +                       default:
> > +                               modestr = NULL;
> > +                               break;
> > +                       }
> > +
> > +                       dev_dbg(core->dev, "DPHY Clock Lane in %s mode\n",
> > +                               modestr);
> > +
> > +                       if (dphyclkstat == XDPHY_HI_SPEED_MODE &&
> > +                           coreenable) {
> > +                               /* Wait for core to apply new active lanes */
> > +                               while (timeout--)
> > +                                       udelay(1);
> > +
> > +                               active_lanes =
> > +                                       xcsi2rxss_read(core, XCSI_PCR_OFFSET);
> > +                               active_lanes &= XCSI_PCR_ACTLANES_MASK;
> > +                               active_lanes++;
> > +
> > +                               if (active_lanes != (u32)ctrl->val) {
> > +                                       dev_err(core->dev, "Failed to set active lanes!\n");
> > +                                       ret = -EAGAIN;
> > +                               }
> > +                       }
> > +               } else {
> > +                       dev_dbg(core->dev, "No read back as no DPHY present.\n");
> > +               }
> > +
> > +               dev_dbg(core->dev, "Set active lanes: requested = %d, active =
> %d\n",
> > +                       ctrl->val, active_lanes);
> > +               break;
> > +       case V4L2_CID_XILINX_MIPICSISS_RESET_COUNTERS:
> > +               xcsi2rxss_reset_event_counters(xcsi2rxss);
> > +               break;
> > +       default:
> > +               break;
> > +       }
> > +
> > +       mutex_unlock(&xcsi2rxss->lock);
> > +
> > +       return ret;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_g_volatile_ctrl - get the Xilinx MIPI CSI-2 Rx controls
> > + * @ctrl: Pointer to V4L2 control
> > + *
> > + * This is used to get the number of frames received by the Xilinx
> > + * MIPI CSI-2 Rx.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > +       int ret = 0;
> > +       struct xcsi2rxss_state *xcsi2rxss =
> > +               container_of(ctrl->handler,
> > +                            struct xcsi2rxss_state, ctrl_handler);
> > +
> > +       mutex_lock(&xcsi2rxss->lock);
> > +
> > +       switch (ctrl->id) {
> > +       case V4L2_CID_XILINX_MIPICSISS_FRAME_COUNTER:
> > +               ctrl->val = xcsi2rxss->core.events[0].counter;
> > +               break;
> > +       default:
> > +               ret = -EINVAL;
> > +       }
> > +
> > +       mutex_unlock(&xcsi2rxss->lock);
> > +
> > +       return ret;
> > +}
> > +
> > +static int xcsi2rxss_start_stream(struct xcsi2rxss_state *xcsi2rxss)
> > +{
> > +       int ret;
> > +
> > +       xcsi2rxss_enable(&xcsi2rxss->core, true);
> > +
> > +       ret = xcsi2rxss_reset(&xcsi2rxss->core);
> > +       if (ret < 0)
> > +               return ret;
> > +
> > +       xcsi2rxss_interrupts_enable(&xcsi2rxss->core, true);
> > +
> > +       return 0;
> > +}
> > +
> > +static void xcsi2rxss_stop_stream(struct xcsi2rxss_state *xcsi2rxss)
> > +{
> > +       xcsi2rxss_interrupts_enable(&xcsi2rxss->core, false);
> > +       xcsi2rxss_enable(&xcsi2rxss->core, false);
> > +}
> > +
> > +/**
> > + * xcsi2rxss_s_stream - It is used to start/stop the streaming.
> > + * @sd: V4L2 Sub device
> > + * @enable: Flag (True / False)
> > + *
> > + * This function controls the start or stop of streaming for the
> > + * Xilinx MIPI CSI-2 Rx Subsystem provided the device isn't in
> > + * suspended state.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > +       int ret = 0;
> > +       struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > +       mutex_lock(&xcsi2rxss->lock);
> > +
> > +       if (xcsi2rxss->suspended) {
> > +               ret = -EBUSY;
> > +               goto unlock;
> > +       }
> > +
> > +       if (enable) {
> > +               if (!xcsi2rxss->streaming) {
> > +                       /* reset the event counters */
> > +                       xcsi2rxss_reset_event_counters(xcsi2rxss);
> > +
> > +                       ret = xcsi2rxss_start_stream(xcsi2rxss);
> > +                       if (ret == 0)
> > +                               xcsi2rxss->streaming = true;
> > +               }
> > +       } else {
> > +               if (xcsi2rxss->streaming) {
> > +                       xcsi2rxss_stop_stream(xcsi2rxss);
> > +                       xcsi2rxss->streaming = false;
> > +               }
> > +       }
> > +unlock:
> > +       mutex_unlock(&xcsi2rxss->lock);
> > +       return ret;
> > +}
> > +
> > +static struct v4l2_mbus_framefmt *
> > +__xcsi2rxss_get_pad_format(struct xcsi2rxss_state *xcsi2rxss,
> > +                          struct v4l2_subdev_pad_config *cfg,
> > +                          unsigned int pad, u32 which)
> > +{
> > +       switch (which) {
> > +       case V4L2_SUBDEV_FORMAT_TRY:
> > +               return v4l2_subdev_get_try_format(&xcsi2rxss->subdev, cfg, pad);
> > +       case V4L2_SUBDEV_FORMAT_ACTIVE:
> > +               return &xcsi2rxss->formats[pad];
> > +       default:
> > +               return NULL;
> > +       }
> > +}
> > +
> > +/**
> > + * xcsi2rxss_get_format - Get the pad format
> > + * @sd: Pointer to V4L2 Sub device structure
> > + * @cfg: Pointer to sub device pad information structure
> > + * @fmt: Pointer to pad level media bus format
> > + *
> > + * This function is used to get the pad format information.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_get_format(struct v4l2_subdev *sd,
> > +                               struct v4l2_subdev_pad_config *cfg,
> > +                               struct v4l2_subdev_format *fmt)
> > +{
> > +       struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > +       mutex_lock(&xcsi2rxss->lock);
> > +       fmt->format = *__xcsi2rxss_get_pad_format(xcsi2rxss, cfg,
> > +                                                 fmt->pad, fmt->which);
> > +       mutex_unlock(&xcsi2rxss->lock);
> > +
> > +       return 0;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_set_format - This is used to set the pad format
> > + * @sd: Pointer to V4L2 Sub device structure
> > + * @cfg: Pointer to sub device pad information structure
> > + * @fmt: Pointer to pad level media bus format
> > + *
> > + * This function is used to set the pad format.
> > + * Since the pad format is fixed in hardware, it can't be
> > + * modified on run time. So when a format set is requested by
> > + * application, all parameters except the format type is
> > + * saved for the pad and the original pad format is sent
> > + * back to the application.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_set_format(struct v4l2_subdev *sd,
> > +                               struct v4l2_subdev_pad_config *cfg,
> > +                               struct v4l2_subdev_format *fmt)
> > +{
> > +       struct v4l2_mbus_framefmt *__format;
> > +       struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +       struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > +       u32 code;
> > +
> > +       mutex_lock(&xcsi2rxss->lock);
> > +
> > +       /*
> > +        * Only the format->code parameter matters for CSI as the
> > +        * CSI format cannot be changed at runtime.
> > +        * Ensure that format to set is copied to over to CSI pad format
> > +        */
> > +       __format = __xcsi2rxss_get_pad_format(xcsi2rxss, cfg,
> > +                                             fmt->pad, fmt->which);
> > +
> > +       /* Save the pad format code */
> > +       code = __format->code;
> > +
> > +       /* If the bayer pattern to be set is SXXXX8 then only 1x8 type
> > +        * is supported and core's data type doesn't matter.
> > +        * In case the bayer pattern being set is SXXX10 then only
> > +        * 1x10 type are supported and core should be configured for RAW10.
> > +        * In case the bayer pattern being set is SXXX12 then only
> > +        * 1x12 type are supported and core should be configured for RAW12.
> > +        *
> > +        * Otherwise don't allow change.
> > +        */
> > +       if ((fmt->format.code == MEDIA_BUS_FMT_SBGGR8_1X8 ||
> > +            fmt->format.code == MEDIA_BUS_FMT_SGBRG8_1X8 ||
> > +            fmt->format.code == MEDIA_BUS_FMT_SGRBG8_1X8 ||
> > +            fmt->format.code == MEDIA_BUS_FMT_SRGGB8_1X8) ||
> > +            (core->datatype == MIPI_CSI_DT_RAW_10 &&
> > +            (fmt->format.code == MEDIA_BUS_FMT_SBGGR10_1X10 ||
> > +             fmt->format.code == MEDIA_BUS_FMT_SGBRG10_1X10 ||
> > +             fmt->format.code == MEDIA_BUS_FMT_SGRBG10_1X10 ||
> > +             fmt->format.code == MEDIA_BUS_FMT_SRGGB10_1X10)) ||
> > +            (core->datatype == MIPI_CSI_DT_RAW_12 &&
> > +            (fmt->format.code == MEDIA_BUS_FMT_SBGGR12_1X12 ||
> > +             fmt->format.code == MEDIA_BUS_FMT_SGBRG12_1X12 ||
> > +             fmt->format.code == MEDIA_BUS_FMT_SGRBG12_1X12 ||
> > +             fmt->format.code == MEDIA_BUS_FMT_SRGGB12_1X12))) {
> > +               /* Copy over the format to be set */
> > +               *__format = fmt->format;
> > +       } else {
> > +               /* Restore the original pad format code */
> > +               fmt->format.code = code;
> > +               __format->code = code;
> > +       }
> > +
> > +       mutex_unlock(&xcsi2rxss->lock);
> > +
> > +       return 0;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_open - Called on v4l2_open()
> > + * @sd: Pointer to V4L2 sub device structure
> > + * @fh: Pointer to V4L2 File handle
> > + *
> > + * This function is called on v4l2_open(). It sets the default format
> > + * for both pads.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_open(struct v4l2_subdev *sd,
> > +                         struct v4l2_subdev_fh *fh)
> > +{
> > +       struct v4l2_mbus_framefmt *format;
> > +       struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > +       format = v4l2_subdev_get_try_format(sd, fh->pad, 0);
> > +       *format = xcsi2rxss->default_format;
> > +
> > +       format = v4l2_subdev_get_try_format(sd, fh->pad, 1);
> > +       *format = xcsi2rxss->default_format;
> > +
> > +       return 0;
> > +}
> > +
> > +static int xcsi2rxss_close(struct v4l2_subdev *sd,
> > +                          struct v4l2_subdev_fh *fh)
> > +{
> > +       return 0;
> > +}
> 
> You can drop the close callback if there's nothing to do there.

Ok. I will remove in next version.

> 
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Media Operations
> > + */
> > +
> > +static const struct media_entity_operations xcsi2rxss_media_ops = {
> > +       .link_validate = v4l2_subdev_link_validate
> > +};
> > +
> > +static const struct v4l2_ctrl_ops xcsi2rxss_ctrl_ops = {
> > +       .g_volatile_ctrl = xcsi2rxss_g_volatile_ctrl,
> > +       .s_ctrl = xcsi2rxss_s_ctrl
> > +};
> > +
> > +static struct v4l2_ctrl_config xcsi2rxss_ctrls[] = {
> > +       {
> > +               .ops    = &xcsi2rxss_ctrl_ops,
> > +               .id     = V4L2_CID_XILINX_MIPICSISS_ACT_LANES,
> > +               .name   = "MIPI CSI2 Rx Subsystem: Active Lanes",
> > +               .type   = V4L2_CTRL_TYPE_INTEGER,
> > +               .min    = 1,
> > +               .max    = 4,
> > +               .step   = 1,
> > +               .def    = 1,
> > +       }, {
> > +               .ops    = &xcsi2rxss_ctrl_ops,
> > +               .id     = V4L2_CID_XILINX_MIPICSISS_FRAME_COUNTER,
> > +               .name   = "MIPI CSI2 Rx Subsystem: Frames Received Counter",
> > +               .type   = V4L2_CTRL_TYPE_INTEGER,
> > +               .min    = 0,
> > +               .max    = 0xFFFFFFFF,
> > +               .step   = 1,
> > +               .def    = 0,
> > +               .flags  = V4L2_CTRL_FLAG_VOLATILE |
> V4L2_CTRL_FLAG_READ_ONLY,
> > +       }, {
> > +               .ops    = &xcsi2rxss_ctrl_ops,
> > +               .id     = V4L2_CID_XILINX_MIPICSISS_RESET_COUNTERS,
> > +               .name   = "MIPI CSI2 Rx Subsystem: Reset Counters",
> > +               .type   = V4L2_CTRL_TYPE_BUTTON,
> > +               .min    = 0,
> > +               .max    = 1,
> > +               .step   = 1,
> > +               .def    = 0,
> > +               .flags  = V4L2_CTRL_FLAG_WRITE_ONLY,
> > +       }
> > +};
> > +
> > +static const struct v4l2_subdev_core_ops xcsi2rxss_core_ops = {
> > +       .log_status = xcsi2rxss_log_status,
> > +       .subscribe_event = xcsi2rxss_subscribe_event,
> > +       .unsubscribe_event = xcsi2rxss_unsubscribe_event
> > +};
> > +
> > +static struct v4l2_subdev_video_ops xcsi2rxss_video_ops = {
> > +       .s_stream = xcsi2rxss_s_stream
> > +};
> > +
> > +static struct v4l2_subdev_pad_ops xcsi2rxss_pad_ops = {
> > +       .get_fmt = xcsi2rxss_get_format,
> > +       .set_fmt = xcsi2rxss_set_format,
> > +};
> > +
> > +static struct v4l2_subdev_ops xcsi2rxss_ops = {
> > +       .core = &xcsi2rxss_core_ops,
> > +       .video = &xcsi2rxss_video_ops,
> > +       .pad = &xcsi2rxss_pad_ops
> > +};
> > +
> > +static const struct v4l2_subdev_internal_ops xcsi2rxss_internal_ops = {
> > +       .open = xcsi2rxss_open,
> > +       .close = xcsi2rxss_close
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Power Management
> > + */
> > +
> > +/*
> > + * xcsi2rxss_pm_suspend - Function called on Power Suspend
> > + * @dev: Pointer to device structure
> > + *
> > + * On power suspend the CSI-2 Core is disabled if the device isn't
> > + * in suspended state and is streaming.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int __maybe_unused xcsi2rxss_pm_suspend(struct device *dev)
> > +{
> > +       struct xcsi2rxss_state *xcsi2rxss = dev_get_drvdata(dev);
> > +
> > +       mutex_lock(&xcsi2rxss->lock);
> > +
> > +       if (!xcsi2rxss->suspended && xcsi2rxss->streaming)
> > +               xcsi2rxss_clr(&xcsi2rxss->core,
> > +                             XCSI_CCR_OFFSET, XCSI_CCR_COREENB_MASK);
> > +
> > +       xcsi2rxss->suspended = true;
> > +
> > +       mutex_unlock(&xcsi2rxss->lock);
> > +
> > +       return 0;
> > +}
> > +
> > +/*
> > + * xcsi2rxss_pm_resume - Function called on Power Resume
> > + * @dev: Pointer to device structure
> > + *
> > + * On power resume the CSI-2 Core is enabled when it is in suspended state
> > + * and prior to entering suspended state it was streaming.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int __maybe_unused xcsi2rxss_pm_resume(struct device *dev)
> > +{
> > +       struct xcsi2rxss_state *xcsi2rxss = dev_get_drvdata(dev);
> > +
> > +       mutex_lock(&xcsi2rxss->lock);
> > +
> > +       if (xcsi2rxss->suspended && xcsi2rxss->streaming)
> > +               xcsi2rxss_set(&xcsi2rxss->core,
> > +                             XCSI_CCR_OFFSET, XCSI_CCR_COREENB_MASK);
> > +
> > +       xcsi2rxss->suspended = false;
> > +
> > +       mutex_unlock(&xcsi2rxss->lock);
> > +       return 0;
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Platform Device Driver
> > + */
> > +
> > +static int xcsi2rxss_parse_of(struct xcsi2rxss_state *xcsi2rxss)
> > +{
> > +       struct device_node *node = xcsi2rxss->core.dev->of_node;
> > +       struct device_node *ports = NULL;
> > +       struct device_node *port = NULL;
> > +       unsigned int nports = 0;
> > +       struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > +       int ret;
> > +       bool iic_present;
> > +
> > +       core->dphy_present = of_property_read_bool(node, "xlnx,dphy-
> present");
> > +       dev_dbg(core->dev, "DPHY present property = %s\n",
> > +               core->dphy_present ? "Present" : "Absent");
> > +
> > +       iic_present = of_property_read_bool(node, "xlnx,iic-present");
> > +       dev_dbg(core->dev, "IIC present property = %s\n",
> > +               iic_present ? "Present" : "Absent");
> > +
> > +       if (core->dphy_present) {
> > +               if (iic_present)
> > +                       core->dphy_offset = 0x20000;
> > +               else
> > +                       core->dphy_offset = 0x10000;
> > +       }
> > +
> > +       ret = of_property_read_u32(node, "xlnx,max-lanes",
> > +                                  &core->max_num_lanes);
> > +       if (ret < 0) {
> > +               dev_err(core->dev, "missing xlnx,max-lanes property\n");
> > +               return ret;
> > +       }
> > +
> > +       if (core->max_num_lanes > 4 || core->max_num_lanes < 1) {
> > +               dev_err(core->dev, "%d max lanes : invalid xlnx,max-lanes
> property\n",
> > +                       core->max_num_lanes);
> > +               return -EINVAL;
> > +       }
> > +
> > +       ret = of_property_read_u32(node, "xlnx,vc", &core->vc);
> > +       if (ret < 0) {
> > +               dev_err(core->dev, "missing xlnx,vc property\n");
> > +               return ret;
> > +       }
> > +       if (core->vc > 4) {
> > +               dev_err(core->dev, "invalid virtual channel property value.\n");
> > +               return -EINVAL;
> > +       }
> > +
> > +       core->enable_active_lanes =
> > +               of_property_read_bool(node, "xlnx,en-active-lanes");
> > +       dev_dbg(core->dev, "Enable active lanes property = %s\n",
> > +               core->enable_active_lanes ? "Present" : "Absent");
> > +
> > +       ret = of_property_read_string(node, "xlnx,csi-pxl-format",
> > +                                     &core->pxlformat);
> > +       if (ret < 0) {
> > +               dev_err(core->dev, "missing xlnx,csi-pxl-format property\n");
> > +               return ret;
> > +       }
> > +
> > +       core->datatype = xcsi2rxss_pxlfmtstrtodt(core->pxlformat);
> > +       if (core->datatype < MIPI_CSI_DT_YUV_420_8B ||
> > +           core->datatype > MIPI_CSI_DT_RAW_14) {
> > +               dev_err(core->dev, "Invalid xlnx,csi-pxl-format string\n");
> > +               return -EINVAL;
> > +       }
> > +
> > +       core->vfb = of_property_read_bool(node, "xlnx,vfb");
> > +       dev_dbg(core->dev, "Video Format Bridge property = %s\n",
> > +               core->vfb ? "Present" : "Absent");
> > +
> > +       if (core->vfb) {
> > +               ret = of_property_read_u32(node, "xlnx,ppc", &core->ppc);
> > +               if (ret < 0 || !(core->ppc == 1 || core->ppc == 2 ||
> > +                                core->ppc == 4)) {
> > +                       dev_err(core->dev, "Invalid xlnx,ppc property ret = %d ppc =
> %d\n",
> > +                               ret, core->ppc);
> > +                       return -EINVAL;
> > +               }
> > +       }
> > +
> > +       ports = of_get_child_by_name(node, "ports");
> > +       if (!ports)
> > +               ports = node;
> > +
> > +       for_each_child_of_node(ports, port) {
> > +               int ret;
> > +               const struct xvip_video_format *format;
> > +               struct device_node *endpoint;
> > +               struct v4l2_fwnode_endpoint v4lendpoint;
> > +
> > +               if (!port->name || of_node_cmp(port->name, "port"))
> > +                       continue;
> > +
> > +               /*
> > +                * Currently only a subset of VFB enabled formats present in
> > +                * xvip are supported in the  driver.
> > +                *
> > +                * If the VFB is disabled, the pixels per clock don't matter.
> > +                * The data width is either 32 or 64 bit as selected in design.
> > +                *
> > +                * For e.g. If Data Type is RGB888, VFB is disabled and
> > +                * data width is 32 bits.
> > +                *
> > +                * Clk Cycle  |  Byte 0  |  Byte 1  |  Byte 2  |  Byte 3
> > +                * -----------+----------+----------+----------+----------
> > +                *     1      |     B0   |     G0   |     R0   |     B1
> > +                *     2      |     G1   |     R1   |     B2   |     G2
> > +                *     3      |     R2   |     B3   |     G3   |     R3
> > +                */
> > +               format = xvip_of_get_format(port);
> > +               if (IS_ERR(format)) {
> > +                       dev_err(core->dev, "invalid format in DT");
> > +                       return PTR_ERR(format);
> > +               }
> > +
> > +               if (core->vfb &&
> > +                   format->vf_code != XVIP_VF_YUV_422 &&
> > +                   format->vf_code != XVIP_VF_RBG &&
> > +                   format->vf_code != XVIP_VF_MONO_SENSOR) {
> > +                       dev_err(core->dev, "Invalid UG934 video format set.\n");
> > +                       return -EINVAL;
> > +               }
> > +
> > +               /* Get and check the format description */
> > +               if (!xcsi2rxss->vip_format) {
> > +                       xcsi2rxss->vip_format = format;
> > +               } else if (xcsi2rxss->vip_format != format) {
> > +                       dev_err(core->dev, "in/out format mismatch in DT");
> > +                       return -EINVAL;
> > +               }
> > +
> > +               endpoint = of_get_next_child(port, NULL);
> > +               if (!endpoint) {
> > +                       dev_err(core->dev, "No port at\n");
> > +                       return -EINVAL;
> > +               }
> > +
> > +               ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint),
> > +                                                &v4lendpoint);
> > +               if (ret) {
> > +                       of_node_put(endpoint);
> > +                       return ret;
> > +               }
> > +
> > +               of_node_put(endpoint);
> > +               dev_dbg(core->dev, "%s : port %d bus type = %d\n",
> > +                       __func__, nports, v4lendpoint.bus_type);
> > +
> > +               if (v4lendpoint.bus_type == V4L2_MBUS_CSI2) {
> > +                       dev_dbg(core->dev, "%s : base.port = %d base.id = %d\n",
> > +                               __func__, v4lendpoint.base.port,
> > +                               v4lendpoint.base.id);
> > +
> > +                       dev_dbg(core->dev, "%s : mipi number lanes = %d\n",
> > +                               __func__,
> > +                               v4lendpoint.bus.mipi_csi2.num_data_lanes);
> > +               } else {
> > +                       dev_dbg(core->dev, "%s : Not a CSI2 bus\n", __func__);
> > +               }
> > +
> > +               /* Count the number of ports. */
> > +               nports++;
> > +       }
> > +
> > +       if (nports != 2) {
> > +               dev_err(core->dev, "invalid number of ports %u\n", nports);
> > +               return -EINVAL;
> > +       }
> > +       xcsi2rxss->npads = nports;
> > +
> > +       /*Register interrupt handler */
> > +       core->irq = irq_of_parse_and_map(node, 0);
> > +
> > +       ret = devm_request_irq(core->dev, core->irq, xcsi2rxss_irq_handler,
> > +                              IRQF_SHARED, "xilinx-csi2rxss", xcsi2rxss);
> > +       if (ret) {
> > +               dev_err(core->dev, "Err = %d Interrupt handler reg failed!\n",
> > +                       ret);
> > +               return ret;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int xcsi2rxss_probe(struct platform_device *pdev)
> > +{
> > +       struct v4l2_subdev *subdev;
> > +       struct xcsi2rxss_state *xcsi2rxss;
> > +       struct resource *res;
> > +
> > +       u32 i;
> > +       int ret;
> > +       int num_ctrls;
> > +
> > +       xcsi2rxss = devm_kzalloc(&pdev->dev, sizeof(*xcsi2rxss), GFP_KERNEL);
> > +       if (!xcsi2rxss)
> > +               return -ENOMEM;
> > +
> > +       mutex_init(&xcsi2rxss->lock);
> > +
> > +       xcsi2rxss->core.dev = &pdev->dev;
> > +
> > +       ret = xcsi2rxss_parse_of(xcsi2rxss);
> > +       if (ret < 0)
> > +               return ret;
> > +
> > +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +       xcsi2rxss->core.iomem = devm_ioremap_resource(xcsi2rxss->core.dev,
> res);
> > +       if (IS_ERR(xcsi2rxss->core.iomem))
> > +               return PTR_ERR(xcsi2rxss->core.iomem);
> > +
> > +       /*
> > +        * Reset and initialize the core.
> > +        */
> > +       xcsi2rxss_reset(&xcsi2rxss->core);
> > +
> > +       xcsi2rxss->core.events =  (struct xcsi2rxss_event *)&xcsi2rxss_events;
> > +
> > +       /* Initialize V4L2 subdevice and media entity */
> > +       xcsi2rxss->pads[0].flags = MEDIA_PAD_FL_SOURCE;
> > +       xcsi2rxss->pads[1].flags = MEDIA_PAD_FL_SINK;
> > +
> > +       /* Initialize the default format */
> > +       memset(&xcsi2rxss->default_format, 0,
> > +              sizeof(xcsi2rxss->default_format));
> > +       xcsi2rxss->default_format.code = xcsi2rxss->vip_format->code;
> > +       xcsi2rxss->default_format.field = V4L2_FIELD_NONE;
> > +       xcsi2rxss->default_format.colorspace = V4L2_COLORSPACE_SRGB;
> > +       xcsi2rxss->default_format.width = XCSI_DEFAULT_WIDTH;
> > +       xcsi2rxss->default_format.height = XCSI_DEFAULT_HEIGHT;
> > +
> > +       xcsi2rxss->formats[0] = xcsi2rxss->default_format;
> > +       xcsi2rxss->formats[1] = xcsi2rxss->default_format;
> > +
> > +       /* Initialize V4L2 subdevice and media entity */
> > +       subdev = &xcsi2rxss->subdev;
> > +       v4l2_subdev_init(subdev, &xcsi2rxss_ops);
> > +
> > +       subdev->dev = &pdev->dev;
> > +       subdev->internal_ops = &xcsi2rxss_internal_ops;
> > +       strlcpy(subdev->name, dev_name(&pdev->dev), sizeof(subdev->name));
> > +
> > +       subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS |
> V4L2_SUBDEV_FL_HAS_DEVNODE;
> > +
> > +       subdev->entity.ops = &xcsi2rxss_media_ops;
> > +
> > +       v4l2_set_subdevdata(subdev, xcsi2rxss);
> > +
> > +       ret = media_entity_pads_init(&subdev->entity, 2, xcsi2rxss->pads);
> > +       if (ret < 0)
> > +               goto error;
> > +
> > +       /*
> > +        * In case the Enable Active Lanes config parameter is not set,
> > +        * dynamic lane reconfiguration is not allowed.
> > +        * So V4L2_CID_XILINX_MIPICSISS_ACT_LANES ctrl will not be registered.
> > +        * Accordingly allocate the number of controls
> > +        */
> > +       num_ctrls = ARRAY_SIZE(xcsi2rxss_ctrls);
> > +
> > +       if (!xcsi2rxss->core.enable_active_lanes)
> > +               num_ctrls--;
> > +
> > +       dev_dbg(xcsi2rxss->core.dev, "# of ctrls = %d\n", num_ctrls);
> > +
> > +       v4l2_ctrl_handler_init(&xcsi2rxss->ctrl_handler, num_ctrls);
> > +
> > +       for (i = 0; i < ARRAY_SIZE(xcsi2rxss_ctrls); i++) {
> > +               struct v4l2_ctrl *ctrl;
> > +
> > +               if (xcsi2rxss_ctrls[i].id ==
> > +                       V4L2_CID_XILINX_MIPICSISS_ACT_LANES) {
> > +                       if (xcsi2rxss->core.enable_active_lanes) {
> > +                               xcsi2rxss_ctrls[i].max =
> > +                                       xcsi2rxss->core.max_num_lanes;
> > +                       } else {
> > +                               /* Don't register control */
> > +                               dev_dbg(xcsi2rxss->core.dev,
> > +                                       "Skip active lane control\n");
> > +                               continue;
> > +                       }
> > +               }
> > +
> > +               dev_dbg(xcsi2rxss->core.dev, "%d ctrl = 0x%x\n",
> > +                       i, xcsi2rxss_ctrls[i].id);
> > +               ctrl = v4l2_ctrl_new_custom(&xcsi2rxss->ctrl_handler,
> > +                                           &xcsi2rxss_ctrls[i], NULL);
> > +               if (!ctrl) {
> > +                       dev_err(xcsi2rxss->core.dev, "Failed for %s ctrl\n",
> > +                               xcsi2rxss_ctrls[i].name);
> > +                       goto error;
> > +               }
> > +       }
> > +
> > +       dev_dbg(xcsi2rxss->core.dev, "# v4l2 ctrls registered = %d\n", i - 1);
> > +
> > +       if (xcsi2rxss->ctrl_handler.error) {
> > +               dev_err(&pdev->dev, "failed to add controls\n");
> > +               ret = xcsi2rxss->ctrl_handler.error;
> > +               goto error;
> > +       }
> > +
> > +       subdev->ctrl_handler = &xcsi2rxss->ctrl_handler;
> > +
> > +       ret = v4l2_ctrl_handler_setup(&xcsi2rxss->ctrl_handler);
> > +       if (ret < 0) {
> > +               dev_err(&pdev->dev, "failed to set controls\n");
> > +               goto error;
> > +       }
> > +
> > +       platform_set_drvdata(pdev, xcsi2rxss);
> > +
> > +       dev_info(xcsi2rxss->core.dev, "Xilinx CSI2 Rx Subsystem device
> found!\n");
> > +
> > +       ret = v4l2_async_register_subdev(subdev);
> > +       if (ret < 0) {
> > +               dev_err(&pdev->dev, "failed to register subdev\n");
> > +               goto error;
> > +       }
> > +
> > +       /* default states for streaming and suspend */
> > +       xcsi2rxss->streaming = false;
> > +       xcsi2rxss->suspended = false;
> > +       return 0;
> > +
> > +error:
> > +       v4l2_ctrl_handler_free(&xcsi2rxss->ctrl_handler);
> > +       media_entity_cleanup(&subdev->entity);
> > +       mutex_destroy(&xcsi2rxss->lock);
> > +
> > +       return ret;
> > +}
> > +
> > +static int xcsi2rxss_remove(struct platform_device *pdev)
> > +{
> > +       struct xcsi2rxss_state *xcsi2rxss = platform_get_drvdata(pdev);
> > +       struct v4l2_subdev *subdev = &xcsi2rxss->subdev;
> > +
> > +       v4l2_async_unregister_subdev(subdev);
> > +       v4l2_ctrl_handler_free(&xcsi2rxss->ctrl_handler);
> > +       media_entity_cleanup(&subdev->entity);
> > +       mutex_destroy(&xcsi2rxss->lock);
> > +
> > +       return 0;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(xcsi2rxss_pm_ops,
> > +                        xcsi2rxss_pm_suspend, xcsi2rxss_pm_resume);
> > +
> > +static const struct of_device_id xcsi2rxss_of_id_table[] = {
> > +       { .compatible = "xlnx,mipi-csi2-rx-subsystem-2.0" },
> > +       { .compatible = "xlnx,mipi-csi2-rx-subsystem-3.0" },
> > +       { }
> > +};
> > +MODULE_DEVICE_TABLE(of, xcsi2rxss_of_id_table);
> > +
> > +static struct platform_driver xcsi2rxss_driver = {
> > +       .driver = {
> > +               .name           = "xilinx-csi2rxss",
> > +               .pm             = &xcsi2rxss_pm_ops,
> > +               .of_match_table = xcsi2rxss_of_id_table,
> > +       },
> > +       .probe                  = xcsi2rxss_probe,
> > +       .remove                 = xcsi2rxss_remove,
> > +};
> > +module_platform_driver(xcsi2rxss_driver);
> 
> A newline here would be nice.

Will add a new line here in next version.

Regards
Vishal Sagar

> 
> > +MODULE_AUTHOR("Vishal Sagar <vishal.sagar@xxxxxxxxxx>");
> > +MODULE_DESCRIPTION("Xilinx MIPI CSI2 Rx Subsystem Driver");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/uapi/linux/xilinx-csi2rxss.h b/include/uapi/linux/xilinx-
> csi2rxss.h
> > new file mode 100644
> > index 0000000..973d5b46
> > --- /dev/null
> > +++ b/include/uapi/linux/xilinx-csi2rxss.h
> > @@ -0,0 +1,25 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
> > +/*
> > + * Events from Xilinx MIPI CSI2 Rx Subsystem exposed to V4L2 application.
> > + *
> > + * Copyright (C) 2016 - 2018 Xilinx, Inc.
> > + * Author: Vishal Sagar <vishal.sagar@xxxxxxxxxx>
> > + */
> > +#ifndef __UAPI_XILINX_CSI2RXSS_H__
> > +#define __UAPI_XILINX_CSI2RXSS_H__
> > +
> > +#include <linux/videodev2.h>
> > +
> > +/*
> > + * Events
> > + *
> > + * V4L2_EVENT_XLNXCSIRX_SPKT: Short packet received
> > + * V4L2_EVENT_XLNXCSIRX_SPKT_OVF: Short packet FIFO overflow
> > + * V4L2_EVENT_XLNXCSIRX_SLBF: Stream line buffer full
> > + */
> > +#define V4L2_EVENT_XLNXCSIRX_CLASS     (V4L2_EVENT_PRIVATE_START |
> 0x100)
> > +#define V4L2_EVENT_XLNXCSIRX_SPKT      (V4L2_EVENT_XLNXCSIRX_CLASS
> | 0x1)
> > +#define V4L2_EVENT_XLNXCSIRX_SPKT_OVF
> (V4L2_EVENT_XLNXCSIRX_CLASS | 0x2)
> > +#define V4L2_EVENT_XLNXCSIRX_SLBF      (V4L2_EVENT_XLNXCSIRX_CLASS |
> 0x3)
> > +
> > +#endif /* __UAPI_XILINX_CSI2RXSS_H__ */
> > diff --git a/include/uapi/linux/xilinx-v4l2-controls.h
> b/include/uapi/linux/xilinx-v4l2-controls.h
> > index b6441fe..4ca3b44 100644
> > --- a/include/uapi/linux/xilinx-v4l2-controls.h
> > +++ b/include/uapi/linux/xilinx-v4l2-controls.h
> > @@ -71,4 +71,18 @@
> >  /* Noise level */
> >  #define V4L2_CID_XILINX_TPG_NOISE_GAIN         (V4L2_CID_XILINX_TPG +
> 17)
> >
> > +/*
> > + * Xilinx MIPI CSI2 Rx Subsystem
> > + */
> > +
> > +/* Base ID */
> > +#define V4L2_CID_XILINX_MIPICSISS              (V4L2_CID_USER_BASE +
> 0xc080)
> > +
> > +/* Active Lanes */
> > +#define V4L2_CID_XILINX_MIPICSISS_ACT_LANES
> (V4L2_CID_XILINX_MIPICSISS + 1)
> > +/* Frames received since streaming is set */
> > +#define V4L2_CID_XILINX_MIPICSISS_FRAME_COUNTER
> (V4L2_CID_XILINX_MIPICSISS + 2)
> > +/* Reset all event counters */
> > +#define V4L2_CID_XILINX_MIPICSISS_RESET_COUNTERS
> (V4L2_CID_XILINX_MIPICSISS + 3)
> > +
> >  #endif /* __UAPI_XILINX_V4L2_CONTROLS_H__ */
> > --
> > 2.7.4
> >
> > This email and any attachments are intended for the sole use of the named
> recipient(s) and contain(s) confidential information that may be proprietary,
> privileged or copyrighted under applicable law. If you are not the intended
> recipient, do not read, copy, or forward this email message or any attachments.
> Delete this email message and any attachments immediately.
> 
> --
> Regards,
> 
> Sakari Ailus







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux