On Thu, Jan 03, 2019 at 08:23:22PM +0100, Marco Felsch wrote: > This series adds the support for Evervision Focaltech based touchscreen > controllers. Evervision uses three different controllers, depending on > the display resolution, these are: > - FT5306 > - FT5726 > - FT5C26. > > It seems that the firmware for all controllers doesn't differ, but I > had only a FT5726 based device. So this series adds only the support > for those devices. > > The Evervision vendor-prefix was added in an another patchset [1]. > > This patchset is based on the v4.20-rc1 tag. > > [1] https://www.spinics.net/lists/devicetree/msg266938.html > > Marco Felsch (5): > dt-bindings: Input: edt-ft5x06 - add support for FT5726 > Input: edt-ft5x06 - add support for Evervision FT5726 > Input: edt-ft5x06 - Add support to update ev-ft5726 registers > dt-bindings: Input: edt-ft5x06 - add offset bindings for ft5726 > Input: edt-ft5x06 - add offset support for ev-ft5726 > > .../bindings/input/touchscreen/edt-ft5x06.txt | 13 ++- > drivers/input/touchscreen/edt-ft5x06.c | 110 ++++++++++++++++-- > 2 files changed, 114 insertions(+), 9 deletions(-) Applied the lot, thank you. -- Dmitry
