The Hollywood GPIO controller is connected to the Hollywood PIC (&PIC1) at IRQs 10 and 11; IRQ 10 for GPIO lines that are configured for access by the PPC, 11 for GPIO lines that are configured for access by the ARM926. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> --- arch/powerpc/boot/dts/wii.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts index 40fe791ec9e6..864e5a17aa1d 100644 --- a/arch/powerpc/boot/dts/wii.dts +++ b/arch/powerpc/boot/dts/wii.dts @@ -187,6 +187,11 @@ "DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3", "DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7"; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <10>; + interrupt-parent = <&PIC1>; + /* * This is commented out while a standard binding * for i2c over gpio is defined. -- 2.20.1
