Corentin Labbe <clabbe@xxxxxxxxxxxx> writes: > I wanted to test the virtex440-ml507 qemu machine and found that the dtb > for it was not builded. > All powerpc DTB are only built when CONFIG_OF_ALL_DTBS is set which depend on > COMPILE_TEST. > > This patchs adds build of virtex dtbs depending on > CONFIG_XILINX_VIRTEX440_GENERIC_BOARD option. > > Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx> > --- > arch/powerpc/boot/dts/Makefile | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile > index fb335d05aae8..cae14fca682e 100644 > --- a/arch/powerpc/boot/dts/Makefile > +++ b/arch/powerpc/boot/dts/Makefile > @@ -4,3 +4,5 @@ subdir-y += fsl > > dtstree := $(srctree)/$(src) > dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) > +dtb-$(CONFIG_XILINX_VIRTEX440_GENERIC_BOARD) += virtex440-ml507.dtb > +dtb-$(CONFIG_XILINX_VIRTEX440_GENERIC_BOARD) += virtex440-ml510.dtb I'll squash these onto one line, eg: dtb-$(CONFIG_XILINX_VIRTEX440_GENERIC_BOARD) += virtex440-ml507.dtb virtex440-ml510.dtb cheers
