[PATCH 4/7] mmc: sdhci: Add quirk for disabling DTO during erase command

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some controllers might prematurely issue a data timeout during an erase
command. Add a quirk to disable the interrupt when an erase command is
issued.

Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
 drivers/mmc/host/sdhci.c | 8 ++++++++
 drivers/mmc/host/sdhci.h | 2 ++
 2 files changed, 10 insertions(+)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 4a9044c06e21..cfd716aee552 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1560,6 +1560,14 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	/* Initially, a command has no error */
 	cmd->error = 0;
 
+	if (cmd->opcode == MMC_ERASE &&
+	    (host->quirks2 & SDHCI_QUIRK2_DISABLE_DTO_FOR_ERASE)) {
+		mask = sdhci_readl(host, SDHCI_INT_ENABLE);
+		mask &= ~SDHCI_INT_DATA_TIMEOUT;
+		sdhci_writel(host, mask, SDHCI_INT_ENABLE);
+		sdhci_writel(host, mask, SDHCI_SIGNAL_ENABLE);
+	}
+
 	if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) &&
 	    cmd->opcode == MMC_STOP_TRANSMISSION)
 		cmd->flags |= MMC_RSP_BUSY;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 7a52823ebef4..d0c6d4fe5371 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -479,6 +479,8 @@ struct sdhci_host {
  * block count.
  */
 #define SDHCI_QUIRK2_USE_32BIT_BLK_CNT			(1<<18)
+/* Controller needs to disable DTO for erase command */
+#define SDHCI_QUIRK2_DISABLE_DTO_FOR_ERASE		(1<<19)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
-- 
2.19.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux