On Thu, Jan 10, 2019 at 2:08 AM Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote: > > Hello, > > This patchset adds Oxalis board support. This board is one of the > 96Boards Enterprise Edition platform from EBS-SYSTART GmbH. Below are some > of the key features of this board: > > * SoC: NXP Layerscape LS1012A > * RAM: 1GB DDR3L > * PMU: NXP VR5100 > * Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA > * Connectivity: 2x Ethernet > * USB: 2x USB3.0 > > More information about this board can be found in 96Boards product > page: https://www.96boards.org/product/oxalis/ > > Ethernet and SPI flash are not supported yet! > > Thanks, > Mani > > Manivannan Sadhasivam (3): > dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix > dt-bindings: arm: fsl: Add devicetree binding for Oxalis > arm64: dts: freescale: Add devicetree for Oxalis > > Documentation/devicetree/bindings/arm/fsl.txt | 4 + This is converted to json-schema now (in Shawn's tree), so you'll need to update to that. Rob > .../devicetree/bindings/vendor-prefixes.txt | 1 + > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++ > 4 files changed, 102 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts > > -- > 2.17.1 >
