Quoting Jacky Bai (2019-01-08 01:00:58) > Add the clock binding doc for i.MX8MM. > > Signed-off-by: Bai Ping <ping.bai@xxxxxxx> > --- > .../devicetree/bindings/clock/imx8mm-clock.txt | 19 ++ > include/dt-bindings/clock/imx8mm-clock.h | 244 +++++++++++++++++++++ > 2 files changed, 263 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx8mm-clock.txt > create mode 100644 include/dt-bindings/clock/imx8mm-clock.h > > diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt b/Documentation/devicetree/bindings/clock/imx8mm-clock.txt > new file mode 100644 > index 0000000..034b6d4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx8mm-clock.txt > @@ -0,0 +1,19 @@ > +* Clock bindings for NXP i.MX8M Mini > + > +Required properties: > +- compatible: Should be "fsl,imx8mm-ccm" > +- reg: Address and length of the register set > +- #clock-cells: Should be <1> > +- clocks: list of clock specifiers, must contain an entry for each required > + entry in clock-names > +- clock-names: should include the following entries: > + - "osc_32k" > + - "osc_24m" > + - "clk_ext1" > + - "clk_ext2" > + - "clk_ext3" > + - "clk_ext4" > + > +The clock consumer should specify the desired clock by having the clock > +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h > +for the full list of i.MX8M Mini clock IDs. Any example of this node? Not the clock consumer.
