Hi all, this is my third attempt to fix the ssd1307fb OLED driver reset. In the second attempt [1] Rob suggested to take different aproach. That is to apply what was originaly part of the first round and eventually merged but reverted later on [2][3]. The last patch in this series is a fixup for the single user (in-tree) that uses this OLED. Rob suggested the fixup may actually be applied only after someone complains their display broke. And a comment from Alexandre regarding the status of the Crystalfontz platform: On 20.12.2018 13:35, Alexandre Belloni wrote: > Honestly, the platform has been discontinued and I don't really think > it is worth having that fixup in the tree forever. Thank you, Michal [1] https://patchwork.kernel.org/patch/10665597/#22327227 [2] https://patchwork.kernel.org/patch/10617729/ [3] https://patchwork.kernel.org/patch/10617731/#22257175 Michal Vokáč (4): dt-bindings: display: ssd1307fb: Remove reset-active-low from examples video: ssd1307fb: Do not hard code active-low reset sequence ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity ARM: mxs: cfa10036: Fixup OLED display reset polarity .../devicetree/bindings/display/ssd1307fb.txt | 2 - arch/arm/boot/dts/imx28-cfa10036.dts | 3 +- arch/arm/mach-mxs/mach-mxs.c | 44 ++++++++++++++++++++++ drivers/video/fbdev/ssd1307fb.c | 4 +- 4 files changed, 48 insertions(+), 5 deletions(-) -- 2.1.4
