Re: [PATCH 5/5] arm64: dts: rockchip: Fix nanopi4 uSD card detect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2019-01-08 10:42 pm, Heiko Stuebner wrote:
Am Dienstag, 8. Januar 2019, 22:57:27 CET schrieb Robin Murphy:
For whatever reason, the sdmmc_dectn function isn't working properly
as-is, and microSD insertion and removal goes unnoticed. Flipping the
pin into GPIO mode, however, does do the job, so let's just handle it
that way for now until someone feels inclined to figure out what GRF
voodoo or otherwise is needed for correct 'native' operation.

Signed-off-by: Robin Murphy <robin.murphy@xxxxxxx>
---
  arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 7 ++++++-
  1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 9c723038d8f8..2a183a6af150 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -505,6 +505,10 @@
  		sdmmc0_pwr_h: sdmmc0-pwr-h {
  			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
  		};
+
+		sdmmc0_det_l: sdmmc0-det-l {

alphabetically by node-name please,
aka sdmmc0-det-* should be above sdmmc0-pwr-*

Right you are, not sure how that one slipped through.

If you're respinning the whole series this should be fixed,
otherwise I can also do that when applying.

I've fixed it up locally, although it might be worth holding off on this particular patch for the moment now that I've taken another look through the TRM and noticed those smoking-gun-looking bits in GRF_SIG_DETECT_CON{0,1} - I'll investigate...

[ side note - do you reckon there'd be any value in bolting a debugfs interface onto the GRF driver, or is the realistic answer to just use /dev/mem like everyone else and stop having silly ideas? ]

Thanks,
Robin.



Heiko

+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
  	};
sdio-pwrseq {
@@ -563,9 +567,10 @@
  	bus-width = <4>;
  	cap-sd-highspeed;
  	cap-mmc-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
  	disable-wp;
  	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_bus4 &sdmmc_cd &sdmmc_clk &sdmmc_cmd>;
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc0_det_l &sdmmc_clk &sdmmc_cmd>;
  	sd-uhs-sdr104;
  	vmmc-supply = <&vcc3v0_sd>;
  	vqmmc-supply = <&vcc_sdio>;








[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux