> -----Original Message-----
> From: Scott Wood <oss@xxxxxxxxxxxx>
> Sent: Saturday, December 22, 2018 06:07
> To: Camelia Alexandra Groza <camelia.groza@xxxxxxx>;
> robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; benh@xxxxxxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> paulus@xxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx
> Subject: Re: [PATCH 2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY
> driver compatible
>
> On Wed, 2018-07-18 at 14:46 +0300, Camelia Groza wrote:
> > The Cortina PHY requires the use of the dedicated Cortina PHY driver
> > instead of the generic one.
> >
> > Signed-off-by: Camelia Groza <camelia.groza@xxxxxxx>
> > ---
> > arch/powerpc/boot/dts/fsl/t4240rdb.dts | 8 ++++----
> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> > b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> > index 15eb0a3..a56a705 100644
> > --- a/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> > +++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> > @@ -267,22 +267,22 @@
> >
> > mdio@fd000 {
> > xfiphy1: ethernet-phy@10 {
> > - compatible = "ethernet-phy-
> ieee802.3-
> > c45";
> > + compatible = "ethernet-phy-
> > id13e5.1002";
> > reg = <0x10>;
> > };
> >
> > xfiphy2: ethernet-phy@11 {
> > - compatible = "ethernet-phy-
> ieee802.3-
> > c45";
> > + compatible = "ethernet-phy-
> > id13e5.1002";
> > reg = <0x11>;
> > };
> >
> > xfiphy3: ethernet-phy@13 {
> > - compatible = "ethernet-phy-
> ieee802.3-
> > c45";
> > + compatible = "ethernet-phy-
> > id13e5.1002";
> > reg = <0x13>;
> > };
> >
> > xfiphy4: ethernet-phy@12 {
> > - compatible = "ethernet-phy-
> ieee802.3-
> > c45";
> > + compatible = "ethernet-phy-
> > id13e5.1002";
> > reg = <0x12>;
> > };
> > };
>
> I get crashes on boot when using a dtb with this change:
Hi
Sorry for the late replay. I was on vacation. I'm looking into it.
Regards,
Camelia
