Re: [PATCH 0/2] Add board support for Chameleon96 Board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Dec 15, 2018 at 08:31:50AM +0530, Manivannan Sadhasivam wrote:
> Hello,
> 
> This patchset adds board support for Chameleon96 board from Novetech
> based on Intel Cyclone V SoC FPGA. This board is one of the Consumer
> Edition boards of the 96Boards family and has the following key features:
>     
> * SoC - Intel Cyclone V SoC FPGA
> * GPU - Graphics based on Intel Video Suite for FPGA
> * RAM - 512MB DDR3L
> * USB - 2x USB2.0 Host, 1x USB2.0 OTG
> * Wireless - Wifi, BT
>     
> More information about this board can be found in 96Boards product
> page: https://www.96boards.org/product/chameleon96/
> 
> This patchset has been tested on Chameleon96 board and the board boots
> into a distro on SD card with USB ports working.
>

Hi,

Ping on this series!

Thanks,
Mani
 
> Thanks,
> Mani
> 
> Manivannan Sadhasivam (2):
>   dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix
>   ARM: dts: Add support for 96Boards Chameleon96 board
> 
>  .../devicetree/bindings/vendor-prefixes.txt   |   1 +
>  arch/arm/boot/dts/Makefile                    |   1 +
>  .../boot/dts/socfpga_cyclone5_chameleon96.dts | 130 ++++++++++++++++++
>  3 files changed, 132 insertions(+)
>  create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
> 
> -- 
> 2.17.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux