The patch ASoC: davinci-mcasp: Document GPIO support has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 4664b94c98b4f9fdd3845da41d5c65288e59c66c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi <peter.ujfalusi@xxxxxx> Date: Thu, 3 Jan 2019 16:05:51 +0200 Subject: [PATCH] ASoC: davinci-mcasp: Document GPIO support McASP pins can be used as GPIO, add optional section to enable GPIO support for McASP. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- .../bindings/sound/davinci-mcasp-audio.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt index b279b6072bd5..a58f79f5345c 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -45,6 +45,23 @@ Optional properties: - fck_parent : Should contain a valid clock name which will be used as parent for the McASP fck +Optional GPIO support: +If any McASP pin need to be used as GPIO then the McASP node must have: +... + gpio-controller + #gpio-cells = <2>; +... + +When requesting a GPIO, the first parameter is the PIN index in McASP_P* +registers. +For example to request the AXR2 pin of mcasp8: +function-gpios = <&mcasp8 2 0>; + +Or to request the ACLKR pin of mcasp8: +function-gpios = <&mcasp8 29 0>; + +For generic gpio information, please refer to bindings/gpio/gpio.txt + Example: mcasp0: mcasp0@1d00000 { -- 2.20.1
