Hi Mita-san,
On Sun, Dec 23, 2018 at 02:12:49AM +0900, Akinobu Mita wrote:
> Remove remaining soc_camera specific code and drop soc_camera dependency
> from this driver.
>
> Cc: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
> Cc: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
> Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
> ---
> drivers/media/i2c/Kconfig | 2 +-
> drivers/media/i2c/mt9m001.c | 84 ++++++++-------------------------------------
> 2 files changed, 15 insertions(+), 71 deletions(-)
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 0efc038..4bdf043 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -845,7 +845,7 @@ config VIDEO_VS6624
>
> config VIDEO_MT9M001
> tristate "mt9m001 support"
> - depends on SOC_CAMERA && I2C
> + depends on I2C && VIDEO_V4L2
> help
> This driver supports MT9M001 cameras from Micron, monochrome
> and colour models.
> diff --git a/drivers/media/i2c/mt9m001.c b/drivers/media/i2c/mt9m001.c
> index f20188a..eb5c4ed 100644
> --- a/drivers/media/i2c/mt9m001.c
> +++ b/drivers/media/i2c/mt9m001.c
> @@ -15,15 +15,12 @@
> #include <linux/log2.h>
> #include <linux/module.h>
>
> -#include <media/soc_camera.h>
> -#include <media/drv-intf/soc_mediabus.h>
> #include <media/v4l2-subdev.h>
> #include <media/v4l2-ctrls.h>
While at it, could you order the list alphabetically? The same applies to
further patches changing included files.
> +#include <media/v4l2-device.h>
>
> /*
> * mt9m001 i2c address 0x5d
> - * The platform has to define struct i2c_board_info objects and link to them
> - * from struct soc_camera_host_desc
> */
>
> /* mt9m001 selected register addresses */
> @@ -278,11 +275,15 @@ static int mt9m001_set_selection(struct v4l2_subdev *sd,
> rect.width = ALIGN(rect.width, 2);
> rect.left = ALIGN(rect.left, 2);
>
> - soc_camera_limit_side(&rect.left, &rect.width,
> - MT9M001_COLUMN_SKIP, MT9M001_MIN_WIDTH, MT9M001_MAX_WIDTH);
> + rect.width = clamp_t(u32, rect.width, MT9M001_MIN_WIDTH,
> + MT9M001_MAX_WIDTH);
> + rect.left = clamp_t(u32, rect.left, MT9M001_COLUMN_SKIP,
> + MT9M001_COLUMN_SKIP + MT9M001_MAX_WIDTH - rect.width);
>
> - soc_camera_limit_side(&rect.top, &rect.height,
> - MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT);
> + rect.height = clamp_t(u32, rect.height, MT9M001_MIN_HEIGHT,
> + MT9M001_MAX_HEIGHT);
> + rect.top = clamp_t(u32, rect.top, MT9M001_ROW_SKIP,
> + MT9M001_ROW_SKIP + MT9M001_MAX_HEIGHT - rect.width);
>
> mt9m001->total_h = rect.height + mt9m001->y_skip_top +
> MT9M001_DEFAULT_VBLANK;
> @@ -561,12 +562,10 @@ static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl)
> * Interface active, can use i2c. If it fails, it can indeed mean, that
> * this wasn't our capture interface, so, we wait for the right one
> */
> -static int mt9m001_video_probe(struct soc_camera_subdev_desc *ssdd,
> - struct i2c_client *client)
> +static int mt9m001_video_probe(struct i2c_client *client)
> {
> struct mt9m001 *mt9m001 = to_mt9m001(client);
> s32 data;
> - unsigned long flags;
> int ret;
>
> /* Enable the chip */
> @@ -581,9 +580,11 @@ static int mt9m001_video_probe(struct soc_camera_subdev_desc *ssdd,
> case 0x8411:
> case 0x8421:
> mt9m001->fmts = mt9m001_colour_fmts;
> + mt9m001->num_fmts = ARRAY_SIZE(mt9m001_colour_fmts);
> break;
> case 0x8431:
> mt9m001->fmts = mt9m001_monochrome_fmts;
> + mt9m001->num_fmts = ARRAY_SIZE(mt9m001_monochrome_fmts);
> break;
> default:
> dev_err(&client->dev,
> @@ -592,26 +593,6 @@ static int mt9m001_video_probe(struct soc_camera_subdev_desc *ssdd,
> goto done;
> }
>
> - mt9m001->num_fmts = 0;
> -
> - /*
> - * This is a 10bit sensor, so by default we only allow 10bit.
> - * The platform may support different bus widths due to
> - * different routing of the data lines.
> - */
> - if (ssdd->query_bus_param)
> - flags = ssdd->query_bus_param(ssdd);
> - else
> - flags = SOCAM_DATAWIDTH_10;
> -
> - if (flags & SOCAM_DATAWIDTH_10)
> - mt9m001->num_fmts++;
> - else
> - mt9m001->fmts++;
> -
> - if (flags & SOCAM_DATAWIDTH_8)
> - mt9m001->num_fmts++;
> -
> mt9m001->fmt = &mt9m001->fmts[0];
>
> dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
> @@ -630,12 +611,6 @@ static int mt9m001_video_probe(struct soc_camera_subdev_desc *ssdd,
> return ret;
> }
>
> -static void mt9m001_video_remove(struct soc_camera_subdev_desc *ssdd)
> -{
> - if (ssdd->free_bus)
> - ssdd->free_bus(ssdd);
> -}
> -
> static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
> {
> struct i2c_client *client = v4l2_get_subdevdata(sd);
> @@ -675,41 +650,18 @@ static int mt9m001_enum_mbus_code(struct v4l2_subdev *sd,
> static int mt9m001_g_mbus_config(struct v4l2_subdev *sd,
> struct v4l2_mbus_config *cfg)
> {
> - struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> -
> /* MT9M001 has all capture_format parameters fixed */
> cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
> V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
> V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER;
> cfg->type = V4L2_MBUS_PARALLEL;
> - cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
>
> return 0;
> }
>
> -static int mt9m001_s_mbus_config(struct v4l2_subdev *sd,
> - const struct v4l2_mbus_config *cfg)
> -{
> - const struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> - struct mt9m001 *mt9m001 = to_mt9m001(client);
> - unsigned int bps = soc_mbus_get_fmtdesc(mt9m001->fmt->code)->bits_per_sample;
> -
> - if (ssdd->set_bus_param)
> - return ssdd->set_bus_param(ssdd, 1 << (bps - 1));
> -
> - /*
> - * Without board specific bus width settings we only support the
> - * sensors native bus width
> - */
> - return bps == 10 ? 0 : -EINVAL;
> -}
> -
> static const struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = {
> .s_stream = mt9m001_s_stream,
> .g_mbus_config = mt9m001_g_mbus_config,
> - .s_mbus_config = mt9m001_s_mbus_config,
> };
>
> static const struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = {
> @@ -736,21 +688,15 @@ static int mt9m001_probe(struct i2c_client *client,
> {
> struct mt9m001 *mt9m001;
> struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> int ret;
>
> - if (!ssdd) {
> - dev_err(&client->dev, "MT9M001 driver needs platform data\n");
> - return -EINVAL;
> - }
> -
> if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
> dev_warn(&adapter->dev,
> "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
> return -EIO;
> }
>
> - mt9m001 = devm_kzalloc(&client->dev, sizeof(struct mt9m001), GFP_KERNEL);
> + mt9m001 = devm_kzalloc(&client->dev, sizeof(*mt9m001), GFP_KERNEL);
> if (!mt9m001)
> return -ENOMEM;
>
> @@ -808,7 +754,7 @@ static int mt9m001_probe(struct i2c_client *client,
> pm_runtime_set_active(&client->dev);
> pm_runtime_enable(&client->dev);
>
> - ret = mt9m001_video_probe(ssdd, client);
> + ret = mt9m001_video_probe(client);
> if (ret)
> goto error_power_off;
>
> @@ -831,7 +777,6 @@ static int mt9m001_probe(struct i2c_client *client,
> static int mt9m001_remove(struct i2c_client *client)
> {
> struct mt9m001 *mt9m001 = to_mt9m001(client);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
>
> v4l2_device_unregister_subdev(&mt9m001->subdev);
> pm_runtime_get_sync(&client->dev);
> @@ -842,7 +787,6 @@ static int mt9m001_remove(struct i2c_client *client)
> mt9m001_power_off(mt9m001);
>
> v4l2_ctrl_handler_free(&mt9m001->hdl);
> - mt9m001_video_remove(ssdd);
> mutex_destroy(&mt9m001->mutex);
>
> return 0;
> --
> 2.7.4
>
--
Regards,
Sakari Ailus
sakari.ailus@xxxxxxxxxxxxxxx
