Re: [PATCH v11 15/27] iommu/exynos: use convenient macro to handle gate clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, 14 Mar 2014 22:27:59 +0530, Sachin Kamat wrote:
>  Hi KyongHo,
> 
> On 14 March 2014 19:13, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> > Hi KyongHo,
> >
> >
> > On 14.03.2014 06:09, Cho KyongHo wrote:
> >>
> >> exynos-iommu driver must care about master H/W's gate clock as well as
> >> System MMU's gate clock. To enhance readability of the source code,
> >> macros to gate/ungate those clocks are defined.
> >>
> >> Signed-off-by: Cho KyongHo <pullip.cho@xxxxxxxxxxx>
> >> ---
> >>   drivers/iommu/exynos-iommu.c |   34 ++++++++++++++++++++++------------
> >>   1 file changed, 22 insertions(+), 12 deletions(-)
> >>
> >> diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
> >> index 71e77f1..cef62d0 100644
> >> --- a/drivers/iommu/exynos-iommu.c
> >> +++ b/drivers/iommu/exynos-iommu.c
> >> @@ -101,6 +101,16 @@
> >>   #define REG_PB1_SADDR         0x054
> >>   #define REG_PB1_EADDR         0x058
> >>
> >> +#define __clk_gate_ctrl(data, clk, en) do {            \
> >> +               if (data->clk)                          \
> >> +                       clk_##en##able(data->clk);      \
> >> +       } while (0)
> >> +
> >> +#define __sysmmu_clk_enable(data)      __clk_gate_ctrl(data, clk, en)
> >> +#define __sysmmu_clk_disable(data)     __clk_gate_ctrl(data, clk, dis)
> >> +#define __master_clk_enable(data)      __clk_gate_ctrl(data, clk_master,
> >> en)
> >> +#define __master_clk_disable(data)     __clk_gate_ctrl(data, clk_master,
> >> dis)
> >> +
> >
> >
> > I'd say that such macros only obfuscate code, without any gains, as you can
> > see in diffstat - this patch adds more lines than it removes.
> >
> > Please drop this change.
> 
>  I agree with Tomasz here.
> 

Are you concerning about using macros or more insertions than deletions?

The deletions in this patch are only clk_enable() and clk_disable()
but they must be
"if (!IS_ERR(clk)) clk_enable(clk)" and "if (!IS_ERR(clk)) clk_disable(clk)".

I think use of macro is fancier in that case.

Thank you.

KyongHo.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux