Re: [PATCH 0/4] Add driver for globaltop GNSS receivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 03, 2019 at 05:04:35PM +0100, Loys Ollivier wrote:
> 
> As suggested by Neil Armstrong - this GNSS device seems to behave like
> most generic GNSS receivers.
> I'll send a v2 with a generic driver that works for both GlobalTop and
> u-blox.

That doesn't sound right to me. Judging from a quick look, this device
appears to be based on a mediatek chipset, so I suggest reworking
(renaming) this as a Mediatek driver (gnss type would be MTK, reflecting
the vendor protocol) even if it happens to look a lot like the current
u-blox driver.

If we ever add more features, like support for some part of the vendor
protocol or maybe 1pps, things will start diverging. As you noticed you
already have the generic serial gnss implementation to handle a lot of
the common bits.

> Loys Ollivier writes:
> 
> > Hello !
> >
> > This patch series adds a new GNSS driver for the globaltop GNSS
> > receivers.  These receivers transmits NMEA output sequence as soon
> > as they have booted.  Power management can be done via the main
> > supply and optional backup supply as defined in the device tree.
> >
> > The driver has been tested using a GlobalTop pa6h chipset on a
> > Libretech-cc board using the expansion header. Changes made in the
> > board device tree can be found below for reference and testing.

Thanks,
Johan



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux