Hi,
On 18-12-28 17:45, Rob Herring wrote:
> On Wed, Dec 19, 2018 at 03:59:40PM +0100, Marco Felsch wrote:
> > Add optional binding to allow USB differential-pair (D+/D-) data lane
> > swapping. The swapping can be specified for each port separately,
> > default is no swapping.
> >
> > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> > ---
> > Documentation/devicetree/bindings/usb/usb251xb.txt | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
> > index 168ff819e827..aec93a92870d 100644
> > --- a/Documentation/devicetree/bindings/usb/usb251xb.txt
> > +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
> > @@ -64,6 +64,8 @@ Optional properties :
> > - power-on-time-ms : Specifies the time it takes from the time the host
> > initiates the power-on sequence to a port until the port has adequate
> > power. The value is given in ms in a 0 - 510 range (default is 100ms).
> > + - sw-dx-lanes-ports : Specifies the ports which will swap the differential-pair
> > + (D+/D-), default is not-swapped.
>
> Perhaps 'swap-dx-ports' would be a more obvious name.
What you think about 'swap-dx-lanes' since it has nothing to do with
port swapping, it's rather swapping port properties internally.
Regards,
Marco
>
> >
> > Examples:
> > usb2512b@2c {
> > @@ -81,4 +83,6 @@ Examples:
> > manufacturer = "Foo";
> > product = "Foo-Bar";
> > serial = "1234567890A";
> > + /* correct misplaced usb connectors on port 1,2 */
> > + sw-dx-lanes-ports = <1 2>;
> > };
> > --
> > 2.19.1
> >
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
