Hi, Here are a few Kconfig text corrections. On 12/23/18 7:13 AM, Pawel Laszczak wrote: > diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig > new file mode 100644 > index 000000000000..4adfd87811e8 > --- /dev/null > +++ b/drivers/usb/cdns3/Kconfig > @@ -0,0 +1,44 @@ > +config USB_CDNS3 > + tristate "Cadence USB3 Dual-Role Controller" > + depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA > + help > + Say Y here if your system has a cadence USB3 dual-role controller. > + It supports: dual-role switch, Host-only, and Peripheral-only. > + > + If you choose to build this driver is a dynamically linked as > + module, the module will be called cdns3.ko. > + > +if USB_CDNS3 > + > +config USB_CDNS3_GADGET > + bool "Cadence USB3 device controller" > + depends on USB_GADGET > + help > + Say Y here to enable device controller functionality of the > + cadence USBSS-DEV driver. > + > + This controller supports FF, HS and SS mode. It doesn't support > + LS and SSP mode mode. > + > +config USB_CDNS3_HOST > + bool "Cadence USB3 host controller" > + depends on USB_XHCI_HCD > + help > + Say Y here to enable host controller functionality of the > + cadence driver. > + > + Host controller is compliance with XHCI so it will use compliant > + standard XHCI driver. > + > +config USB_CDNS3_PCI_WRAP > + tristate "Cadence USB3 support on PCIe-based platforms" > + depends on USB_PCI && ACPI > + default USB_CDNS3 > + help > + If you're using the USBSS Core IP with a PCIe, please say > + 'Y' or 'M' here. > + > + If you choose to build this driver as module it will > + be dynamically linked and module will be called cdns3-pci.ko > + > +endif g'day. -- ~Randy
