This patch adds syscon based phandle to Cirrus Logic CLPS711X device
nodes that can use it. These phandles will be used to replace usage
of syscon_regmap_lookup_by_compatible() and
syscon_regmap_lookup_by_pdevname() by syscon_regmap_lookup_by_phandle().
Signed-off-by: Alexander Shiyan <shc_work@xxxxxxx>
---
arch/arm/boot/dts/ep7209.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi
index 48a1660a9cf2..1630b3d3873e 100644
--- a/arch/arm/boot/dts/ep7209.dtsi
+++ b/arch/arm/boot/dts/ep7209.dtsi
@@ -119,6 +119,7 @@
compatible = "cirrus,ep7209-fb";
reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
clocks = <&clks CLPS711X_CLK_BUS>;
+ syscon = <&syscon1>;
status = "disabled";
};
@@ -158,6 +159,7 @@
reg = <0x80000500 0x4>;
interrupts = <15>;
clocks = <&clks CLPS711X_CLK_SPI>;
+ syscon = <&syscon3>;
status = "disabled";
};
@@ -181,6 +183,7 @@
clocks = <&clks CLPS711X_CLK_PLL>;
clock-names = "pll";
interrupts = <32>;
+ syscon = <&syscon3>;
status = "disabled";
};
@@ -192,6 +195,7 @@
mctrl: mctrl {
compatible = "cirrus,ep7209-mctrl-gpio";
+ gpio,syscon-dev = <&syscon1 0 0>;
gpio-controller;
#gpio-cells = <2>;
};
--
2.13.0
