Re: [PATCH v2] arm64: dts: sdm845: add video nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018-11-30 12:09, Alexandre Courbot wrote:
On Wed, Nov 28, 2018 at 10:12 PM Malathi Gottam <mgottam@xxxxxxxxxxxxxx> wrote:

This adds video nodes to sdm845 based on the examples
in the bindings.

Signed-off-by: Malathi Gottam <mgottam@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0c9a2aa..4c9d6a4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -84,6 +84,11 @@
                        reg = <0 0x86200000 0 0x2d00000>;
                        no-map;
                };
+
+               venus_region: memory@95800000 {
+                       reg = <0x0 0x95800000 0x0 0x500000>;

This patch depends on the firmware loader being fixed to not expect a
6MB area size. I think you can do it as follows:


For now, we are proceeding on adding node with memory region as 6MB.
Once we have the other patch for fixing firmware loader merged,
we can then try on recording the reserved area size.

I am posting updated patch with hard coded memory region.

Regards,
Malathi.

1) Record the reserved area size in the venus_core structure during
venus_load_fw(),
2) Use that area size in place of VENUS_FW_MEM_SIZE everywhere else in the code.

That way we don't put any artificial limitation on the expected
firmware size, or on the reserved area in the DT matching a hardcoded
size.

Once you have this, the driver should work no matter what the size of
the reserved area is, provided the firmware first into it.

+                       no-map;
+               };
        };

        cpus {
@@ -1103,5 +1108,35 @@
                                status = "disabled";
                        };
                };
+
+               video-codec@aa00000 {
+                       compatible = "qcom,sdm845-venus";
+                       reg = <0x0aa00000 0xff000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+                       power-domains = <&videocc VENUS_GDSC>;
+ clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                                <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+ <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>;
+                       clock-names = "core", "iface", "bus";
+                       iommus = <&apps_smmu 0x10a0 0x8>,
+                                <&apps_smmu 0x10b0 0x0>;
+                       memory-region = <&venus_region>;
+
+                       video-core0 {
+                               compatible = "venus-decoder";
+ clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+                               clock-names = "core", "bus";
+ power-domains = <&videocc VCODEC0_GDSC>;
+                       };
+
+                       video-core1 {
+                               compatible = "venus-encoder";
+ clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+                               clock-names = "core", "bus";
+ power-domains = <&videocc VCODEC1_GDSC>;
+                       };

We should probably have status = "disabled" here and enable this node
on a per-board basis?

Also, shouldn't we define the firmware subnode here too?

Cheers,
Alex.
--
1.9.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux