Everyone: This patch contains changes I made in order to add support for i.MX8MQ to reset-imx7.c in order to enable support of PCIE IP block on i.MX8MQ SoCs. Feedback is welcome! Thanks, Andrey Smirnov Changes since [v3] - Kconfig entry is converted to use ARCH_MXC - Collected Reviewed-by from Rob Herring Changes since [v2] - Constified "variant" field in struct imx7_src - Moved dt-bindings/reset/imx8mq-reset.h to be a part of the patch documenting DT bindings Changes since [v1] - Series re-written to use a per-variant LUT instead of using a single table - Changed driver to use "imx8mq" insead of "imx8m" to match other drivers and CONFIG_ARCH_IMX8MQ - Updated list of exported i.MX8MQ resets, add missing and remove bogus ones (hopefully nothing is missing this time) [v3] lkml.kernel.org/r/20181217023827.7947-1-andrew.smirnov@xxxxxxxxx [v2] lkml.kernel.org/r/20181128043738.12714-1-andrew.smirnov@xxxxxxxxx [v1] lkml.kernel.org/r/20181117181131.9330-2-andrew.smirnov@xxxxxxxxx Andrey Smirnov (3): reset: imx7: Add plubming to support multiple IP variants dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs reset: imx7: Add support for i.MX8MQ IP block variant .../bindings/reset/fsl,imx7-src.txt | 7 +- drivers/reset/Kconfig | 4 +- drivers/reset/reset-imx7.c | 166 ++++++++++++++++-- include/dt-bindings/reset/imx8mq-reset.h | 64 +++++++ 4 files changed, 221 insertions(+), 20 deletions(-) create mode 100644 include/dt-bindings/reset/imx8mq-reset.h -- 2.19.1
