Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 17, 2018 at 08:07:02PM -0800, Andrey Smirnov wrote:
> Add code needed to support i.MX8MQ variant.
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
> Cc: Chris Healy <cphealy@xxxxxxxxx>
> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Cc: Leonard Crestez <leonard.crestez@xxxxxxx>
> Cc: "A.s. Dong" <aisheng.dong@xxxxxxx>
> Cc: Richard Zhu <hongxing.zhu@xxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-imx@xxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: linux-pci@xxxxxxxxxxxxxxx
> ---
>  .../bindings/pci/fsl,imx6q-pcie.txt           |  6 +-
>  drivers/pci/controller/dwc/Kconfig            |  4 +-
>  drivers/pci/controller/dwc/pci-imx6.c         | 82 ++++++++++++++++++-
>  3 files changed, 87 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index d514c1f2365f..1a10c313e8d7 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -9,6 +9,7 @@ Required properties:
>  	- "fsl,imx6sx-pcie",
>  	- "fsl,imx6qp-pcie"
>  	- "fsl,imx7d-pcie"
> +	- "fsl,imx8mq-pcie"
>  - reg: base address and length of the PCIe controller
>  - interrupts: A list of interrupt outputs of the controller. Must contain an
>    entry for each entry in the interrupt-names property.
> @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie:
>    PCIE_PHY power domains
>  - power-domain-names: Must be "pcie", "pcie_phy"
>  
> -Additional required properties for imx7d-pcie:
> +Additional required properties for imx7d-pcie and imx8mq-pcie:
>  - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
>  - resets: Must contain phandles to PCIe-related reset lines exposed by SRC
>    IP block
> @@ -54,6 +55,9 @@ Additional required properties for imx7d-pcie:
>  	       - "apps"
>  	       - "turnoff"
>  
> +Additional required properties for imx8mq-pcie:
> +- fsl,controller-id: Logical ID of a given PCIE controller. PCIE1 is 0, PCIE2 is 1;
> +

Remove this.

If GPR register offset is what you need, then put that into DT. 
Typically, we'd have a property with iomuxc phandle and offset.

Rob



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux