Re: [PATCH v3 2/2] dt-bindings: net: dsa: ksz9477: add sample of switch bindings managed in i2c mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 17, 2018 at 09:44:23PM +0100, Sergio Paracuellos wrote:
> Add device-tree binding example of the ksz9477 switch managed in i2c mode.
> 
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> ---
> Changes v3:
>     - No changes. Just resent patches together.
> 
> Changes v2:
>     - Use generic name for label of the switch and make sure reg and @X
>       have the same value.
> 
>  .../devicetree/bindings/net/dsa/ksz.txt       | 50 +++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
> index 0f407fb371ce..d3c4b9d4f416 100644
> --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
> +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
> @@ -74,3 +74,53 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0:
>                                                               };
>                                               };
>                               };
> +
> +Ethernet switch connected via I2C to the host, CPU port wired to eth0:
> +
> +                             eth0: ethernet@10001000 {

Why do we have all this indentation? Please remove. And use tab chars, 
not spaces.

> +                                             fixed-link {
> +                                                             speed = <1000>;
> +                                                             full-duplex;
> +                                             };
> +                             };
> +
> +                             i2c0: i2c@f8008000 {
> +                                             switch: ksz9897@5f {
> +                                                             compatible = "microchip,ksz9897";
> +                                                             reg = <5f>;
> +
> +                                                             ports {
> +                                                                             #address-cells = <1>;
> +                                                                             #size-cells = <0>;
> +                                                                             port@0 {
> +                                                                                             reg = <0>;
> +                                                                                             label = "lan1";
> +                                                                             };
> +                                                                             port@1 {
> +                                                                                             reg = <1>;
> +                                                                                             label = "lan2";
> +                                                                             };
> +                                                                             port@2 {
> +                                                                                             reg = <2>;
> +                                                                                             label = "lan3";
> +                                                                             };
> +                                                                             port@3 {
> +                                                                                             reg = <3>;
> +                                                                                             label = "lan4";
> +                                                                             };
> +                                                                             port@4 {
> +                                                                                             reg = <4>;
> +                                                                                             label = "lan5";
> +                                                                             };
> +                                                                             port@6 {
> +                                                                                             reg = <6>;
> +                                                                                             label = "cpu";
> +                                                                                             ethernet = <&eth0>;
> +                                                                                             fixed-link {
> +                                                                                                             speed = <1000>;
> +                                                                                                             full-duplex;
> +                                                                                             };
> +                                                                             };
> +                                                             };
> +                                             };
> +                             };
> -- 
> 2.19.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux