Re: [PATCH 02/17] arm64: dts: renesas: r8a774c0: Add I2C and IIC-DVFS support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 14, 2018 at 09:37:25AM +0000, Fabrizio Castro wrote:
> Add the I2C[0-7] and IIC Bus Interface for DVFS (IIC for DVFS)
> devices nodes to the r8a774c0 device tree.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>

Thanks Fabrizo for this patch, it looks good to me with the exception of
one minor question I have below.

> ---
>  arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 143 ++++++++++++++++++++++++++++++
>  1 file changed, 143 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
> index 96a71e3..bf08aba 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
> @@ -271,6 +271,149 @@
>  			resets = <&cpg 407>;
>  		};
>  
> +		i2c0: i2c@e6500000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a774c0",
> +				     "renesas,rcar-gen3-i2c";
> +			reg = <0 0xe6500000 0 0x40>;
> +			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 931>;
> +			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> +			resets = <&cpg 931>;
> +			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
> +			       <&dmac2 0x91>, <&dmac2 0x90>;
> +			dma-names = "tx", "rx", "tx", "rx";
> +			i2c-scl-internal-delay-ns = <110>;
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c@e6508000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a774c0",
> +				     "renesas,rcar-gen3-i2c";
> +			reg = <0 0xe6508000 0 0x40>;
> +			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 930>;
> +			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> +			resets = <&cpg 930>;
> +			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
> +			       <&dmac2 0x93>, <&dmac2 0x92>;
> +			dma-names = "tx", "rx", "tx", "rx";
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c2: i2c@e6510000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a774c0",
> +				     "renesas,rcar-gen3-i2c";
> +			reg = <0 0xe6510000 0 0x40>;
> +			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 929>;
> +			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> +			resets = <&cpg 929>;
> +			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
> +			       <&dmac2 0x95>, <&dmac2 0x94>;
> +			dma-names = "tx", "rx", "tx", "rx";
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c3: i2c@e66d0000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a774c0",
> +				     "renesas,rcar-gen3-i2c";
> +			reg = <0 0xe66d0000 0 0x40>;
> +			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 928>;
> +			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> +			resets = <&cpg 928>;
> +			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
> +			dma-names = "tx", "rx";
> +			i2c-scl-internal-delay-ns = <110>;
> +			status = "disabled";
> +		};
> +
> +		i2c4: i2c@e66d8000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a774c0",
> +				     "renesas,rcar-gen3-i2c";
> +			reg = <0 0xe66d8000 0 0x40>;
> +			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 927>;
> +			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> +			resets = <&cpg 927>;
> +			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
> +			dma-names = "tx", "rx";
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c5: i2c@e66e0000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a774c0",
> +				     "renesas,rcar-gen3-i2c";
> +			reg = <0 0xe66e0000 0 0x40>;
> +			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 919>;
> +			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> +			resets = <&cpg 919>;
> +			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
> +			dma-names = "tx", "rx";
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c6: i2c@e66e8000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a774c0",
> +				     "renesas,rcar-gen3-i2c";
> +			reg = <0 0xe66e8000 0 0x40>;
> +			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 918>;
> +			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> +			resets = <&cpg 918>;
> +			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
> +			dma-names = "tx", "rx";
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c7: i2c@e6690000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a774c0",
> +				     "renesas,rcar-gen3-i2c";
> +			reg = <0 0xe6690000 0 0x40>;
> +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 1003>;
> +			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> +			resets = <&cpg 1003>;
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c_dvfs: i2c@e60b0000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,iic-r8a774c0";
> +			reg = <0 0xe60b0000 0 0x15>;

My reading of the documentation is that 0x31 would be a more appropriate
size for the register window.

> +			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 926>;
> +			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> +			resets = <&cpg 926>;
> +			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
> +			dma-names = "tx", "rx";
> +			status = "disabled";
> +		};
> +
>  		hscif0: serial@e6540000 {
>  			compatible = "renesas,hscif-r8a774c0",
>  				     "renesas,rcar-gen3-hscif",
> -- 
> 2.7.4
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux