Re: [PATCH 0/7] microblaze: fix various problems in building boot images

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 12, 2018 at 10:50 PM Michal Simek <michal.simek@xxxxxxxxxx> wrote:
>
> On 08. 12. 18 7:14, Masahiro Yamada wrote:
> > On Sat, Dec 8, 2018 at 12:20 AM Michal Simek <michal.simek@xxxxxxxxxx> wrote:
> >>
> >> On 07. 12. 18 14:29, Michal Simek wrote:
> >>> On 07. 12. 18 12:29, Masahiro Yamada wrote:
> >>>> On Thu, Dec 6, 2018 at 11:55 PM Michal Simek <monstr@xxxxxxxxx> wrote:
> >>>>>
> >>>>> On 03. 12. 18 8:50, Masahiro Yamada wrote:
> >>>>>> This patch set fixes various issues in microblaze Makefiles.
> >>>>>>
> >>>>>> BTW, "simpleImage.<dt>" works like a phony target to generate the
> >>>>>> following four images, where the first three are just aliases.
> >>>>>>
> >>>>>>  - arch/microblaze/boot/simpleImage.<dt>:
> >>>>>>          identical to arch/microblaze/boot/linux.bin
> >>>>>>
> >>>>>>  - arch/microblaze/boot/simpleImage.<dt>.unstrip:
> >>>>>>          identical to vmlinux
> >>>>>>
> >>>>>>  - arch/microblaze/boot/simpleImage.<dt>.ub:
> >>>>>>          identical to arch/microblaze/boot/linux.bin.ub
> >>>>>>
> >>>>>>  - arch/microblaze/boot/simpleImage.<dt>.strip:
> >>>>>>          stripped vmlinux
> >>>>>>
> >>>>>> I am not sure how much useful those copies are,
> >>>>>> but, I tried my best to keep the same behavior.
> >>>>>>
> >>>>>> IMHO, I guess DTB=<dt> would be more sensible,
> >>>>>> but it is up to Michal.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> Masahiro Yamada (7):
> >>>>>>   microblaze: fix cleaning of boot images
> >>>>>>   microblaze: adjust the help to the real behavior
> >>>>>>   microblaze: move "... is ready" message to arch/microblaze/Makefile
> >>>>>>   microblaze: fix multiple bugs in arch/microblaze/boot/Makefile
> >>>>>>   microblaze: add linux.bin* and simpleImage.* to PHONY
> >>>>>>   microblaze: fix race condition in building boot images
> >>>>>>   microblaze: remove the unneeded code just in case file copy fails
> >>>>>>
> >>>>>>  arch/microblaze/Makefile          | 14 +++++++++-----
> >>>>>>  arch/microblaze/boot/Makefile     | 33 +++++++++++++++++----------------
> >>>>>>  arch/microblaze/boot/dts/Makefile |  5 +----
> >>>>>>  3 files changed, 27 insertions(+), 25 deletions(-)
> >>>>>>
> >>>>>
> >>>>> One more thing I have in my mind for a while is that will be good to
> >>>>> configure kernel build flags from DT and completely get rid of these
> >>>>> symbols.
> >>>>>
> >>>>> XILINX_MICROBLAZE0_USE_MSR_INSTR
> >>>>> XILINX_MICROBLAZE0_USE_PCMP_INSTR
> >>>>> XILINX_MICROBLAZE0_USE_BARREL
> >>>>> XILINX_MICROBLAZE0_USE_DIV
> >>>>> XILINX_MICROBLAZE0_USE_HW_MUL
> >>>>> XILINX_MICROBLAZE0_USE_FPU
> >>>>>
> >>>>> It means setup CPUFLAGS based on extracting that values from DT that it
> >>>>> all the time match the hardware.
> >>>>> It will also simplify all the CPUFLAGS logic which is in
> >>>>> arch/microblaze/Makefile.
> >>>>>
> >>>>> Do you have any idea how this can be done?
> >>>>
> >>>>
> >>>> I have no idea.
> >>>>
> >>>> Parsing DTS with sed or something would be possible, but ugly.
> >>>>
> >>>> In my opinion, the kernel should be multi platform image,
> >>>> in other words, it is the least common denominator
> >>>> of supported platforms.
> >>>>
> >>>> So, the kernel should enable all features that may or may not be used
> >>>> depending on platform.
> >>>>
> >>>> I do not know if this works for MB.
> >>>
> >>> Microblaze is soft core CPU where you can select if you want to have it
> >>> with multiplier, divider, barrel shifter, etc.
> >>> You can of course say that you don't have them and you have "universal"
> >>> kernel but very slow.
> >>> That's why user has to setup these configs which are converted to cflags
> >>> to say GCC what can be used.
> >>> And these configs can be simply parsed from dt.
> >>>
> >>> For example like this based on dtb (quick hack)
> >>>
> >>> for i in `echo use-msr-instr use-pcmp-instr use-barrel use-div
> >>> use-hw-mul use-fpu`; do
> >>>       UPPER=`echo $i | tr '-' '_' | tr '[a-z]' '[A-Z}'`
> >>>       echo $i $UPPER;
> >>>
> >>>       VAR=`fdtget -t i $FILE/arch/microblaze/boot/dts/system.dtb /cpus/cpu@0/
> >>> xlnx,$i`
> >>>       FLAGS+="CONFIG_XILINX_MICROBLAZE0_${UPPER}=${VAR} "
> >>> done
> >>>
> >>> make $FLAGS
> >>>
> >>>
> >>> When simpleImage is requested dt could be parsed to setup proper build
> >>> flags.
> >>
> >> One more thing I found is that I have done these changes
> >>
> >> diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
> >> index bbd6968ce55b..dc6a6fee3ae2 100644
> >> --- a/arch/microblaze/kernel/setup.c
> >> +++ b/arch/microblaze/kernel/setup.c
> >> @@ -153,11 +153,13 @@ void __init machine_early_init(const char
> >> *cmdline, unsigned int ram,
> >>  #endif
> >>
> >>  #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
> >> +#error MSR is enabled
> >>         if (msr) {
> >>                 pr_info("!!!Your kernel has setup MSR instruction but ");
> >>                 pr_cont("CPU don't have it %x\n", msr);
> >>         }
> >>  #else
> >> +#error MSR is not enabled
> >>         if (!msr) {
> >>                 pr_info("!!!Your kernel not setup MSR instruction but ");
> >>                 pr_cont("CPU have it %x\n", msr);
> >>
> >> and run MSR with 1
> >> make defconfig && make CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
> >> arch/microblaze/kernel/setup.o
> >> it errors #error MSR is enabled
> >> and all is good.
> >>
> >> And when I run MSR with 0
> >> make defconfig && make CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=0
> >> arch/microblaze/kernel/setup.o
> >> also getting #error MSR is enabled
> >> which is wrong.
> >>
> >> Is there any rule what can be setup at compilation time?
> >
> > You are trying to do very specific things,
> > I do not have a clean solution.
> >
> > I do not mind whatever you do in arch-Makefile.
>
> ok.
>
> >
> > If you look at stack_protector_prepare in arch/powerpc/Makefile,
> > it is parsing a file with awk to setup compiler flags.
>
> Ok. Will do more experiments with it.
>
> Can you please at least confirm me that config options passed via
> command line as above should be used instead of that one in .config?
> (Just want to understand why USE_MSR is so special that it is not
> working properly).




make defconfig && make CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1

does not work.

It overrides only references in Makefiles.



C files still refer to include/generated/autoconf.h
which is created based on Kconfig.


KBUILD_CPPFLAGS +=
-DCONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=$(CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR)

might work although it is ugly.

(At least, CONFIG_ prefix should be ripped off)



-- 
Best Regards
Masahiro Yamada



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux