From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
The regulator supports a dedicated suspend mode.
Implement the appropriate ->set_suspend_xx() hooks, add support for
->set_mode(), and provide basic PM ops functionalities to setup the
regulator in a suspend state when the system is entering suspend.
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
[claudiu.beznea@xxxxxxxxxxxxx: remove shutdown function, use dev_pm_ops,
fix checkpatch warning, adapt commit message, add LDO modes support,
move modes constants to active-semi,8945a-regulator.h, remove rdevs from
struct act8945a_pmic, add op_mode to act8945a_pmic]
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
drivers/regulator/act8945a-regulator.c | 186 ++++++++++++++++++++-
.../regulator/active-semi,8945a-regulator.h | 30 ++++
2 files changed, 211 insertions(+), 5 deletions(-)
create mode 100644 include/dt-bindings/regulator/active-semi,8945a-regulator.h
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
index 8d71d9893d0d..f37d1a860407 100644
--- a/drivers/regulator/act8945a-regulator.c
+++ b/drivers/regulator/act8945a-regulator.c
@@ -18,6 +18,7 @@
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
/**
* ACT8945A Global Register Map.
@@ -28,20 +29,27 @@
#define ACT8945A_DCDC1_VSET1 0x20
#define ACT8945A_DCDC1_VSET2 0x21
#define ACT8945A_DCDC1_CTRL 0x22
+#define ACT8945A_DCDC1_SUS 0x24
#define ACT8945A_DCDC2_VSET1 0x30
#define ACT8945A_DCDC2_VSET2 0x31
#define ACT8945A_DCDC2_CTRL 0x32
+#define ACT8945A_DCDC2_SUS 0x34
#define ACT8945A_DCDC3_VSET1 0x40
#define ACT8945A_DCDC3_VSET2 0x41
#define ACT8945A_DCDC3_CTRL 0x42
+#define ACT8945A_DCDC3_SUS 0x44
#define ACT8945A_LDO1_VSET 0x50
#define ACT8945A_LDO1_CTRL 0x51
+#define ACT8945A_LDO1_SUS 0x52
#define ACT8945A_LDO2_VSET 0x54
#define ACT8945A_LDO2_CTRL 0x55
+#define ACT8945A_LDO2_SUS 0x56
#define ACT8945A_LDO3_VSET 0x60
#define ACT8945A_LDO3_CTRL 0x61
+#define ACT8945A_LDO3_SUS 0x62
#define ACT8945A_LDO4_VSET 0x64
#define ACT8945A_LDO4_CTRL 0x65
+#define ACT8945A_LDO4_SUS 0x66
/**
* Field Definitions.
@@ -62,7 +70,12 @@ enum {
ACT8945A_ID_LDO2,
ACT8945A_ID_LDO3,
ACT8945A_ID_LDO4,
- ACT8945A_REG_NUM,
+ ACT8945A_ID_MAX,
+};
+
+struct act8945a_pmic {
+ struct regmap *regmap;
+ u32 op_mode[ACT8945A_ID_MAX];
};
static const struct regulator_linear_range act8945a_voltage_ranges[] = {
@@ -71,6 +84,143 @@ static const struct regulator_linear_range act8945a_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
};
+static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev->desc->id, reg, val;
+
+ switch (id) {
+ case ACT8945A_ID_DCDC1:
+ reg = ACT8945A_DCDC1_SUS;
+ val = 0xa8;
+ break;
+ case ACT8945A_ID_DCDC2:
+ reg = ACT8945A_DCDC2_SUS;
+ val = 0xa8;
+ break;
+ case ACT8945A_ID_DCDC3:
+ reg = ACT8945A_DCDC3_SUS;
+ val = 0xa8;
+ break;
+ case ACT8945A_ID_LDO1:
+ reg = ACT8945A_LDO1_SUS;
+ val = 0xe8;
+ break;
+ case ACT8945A_ID_LDO2:
+ reg = ACT8945A_LDO2_SUS;
+ val = 0xe8;
+ break;
+ case ACT8945A_ID_LDO3:
+ reg = ACT8945A_LDO3_SUS;
+ val = 0xe8;
+ break;
+ case ACT8945A_ID_LDO4:
+ reg = ACT8945A_LDO4_SUS;
+ val = 0xe8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (enable)
+ val |= BIT(4);
+
+ /*
+ * Ask the PMIC to enable/disable this output when entering hibernate
+ * mode.
+ */
+ return regmap_write(regmap, reg, val);
+}
+
+static int act8945a_set_suspend_enable(struct regulator_dev *rdev)
+{
+ return act8945a_set_suspend_state(rdev, true);
+}
+
+static int act8945a_set_suspend_disable(struct regulator_dev *rdev)
+{
+ return act8945a_set_suspend_state(rdev, false);
+}
+
+static unsigned int act8945a_of_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case ACT8945A_REGULATOR_MODE_FIXED:
+ case ACT8945A_REGULATOR_MODE_NORMAL:
+ return REGULATOR_MODE_NORMAL;
+ case ACT8945A_REGULATOR_MODE_LOWPOWER:
+ return REGULATOR_MODE_STANDBY;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev->desc->id;
+ int reg, ret, val = 0;
+
+ switch (id) {
+ case ACT8945A_ID_DCDC1:
+ reg = ACT8945A_DCDC1_CTRL;
+ break;
+ case ACT8945A_ID_DCDC2:
+ reg = ACT8945A_DCDC2_CTRL;
+ break;
+ case ACT8945A_ID_DCDC3:
+ reg = ACT8945A_DCDC3_CTRL;
+ break;
+ case ACT8945A_ID_LDO1:
+ reg = ACT8945A_LDO1_SUS;
+ break;
+ case ACT8945A_ID_LDO2:
+ reg = ACT8945A_LDO2_SUS;
+ break;
+ case ACT8945A_ID_LDO3:
+ reg = ACT8945A_LDO3_SUS;
+ break;
+ case ACT8945A_ID_LDO4:
+ reg = ACT8945A_LDO4_SUS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (mode) {
+ case REGULATOR_MODE_STANDBY:
+ if (rdev->desc->id > ACT8945A_ID_DCDC3)
+ val = BIT(5);
+ break;
+ case REGULATOR_MODE_NORMAL:
+ if (rdev->desc->id <= ACT8945A_ID_DCDC3)
+ val = BIT(5);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(regmap, reg, BIT(5), val);
+ if (ret)
+ return ret;
+
+ act8945a->op_mode[id] = mode;
+
+ return 0;
+}
+
+static unsigned int act8945a_get_mode(struct regulator_dev *rdev)
+{
+ struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
+ int id = rdev->desc->id;
+
+ if (id < ACT8945A_ID_DCDC1 || id >= ACT8945A_ID_MAX)
+ return -EINVAL;
+
+ return act8945a->op_mode[id];
+}
+
static const struct regulator_ops act8945a_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
@@ -78,7 +228,11 @@ static const struct regulator_ops act8945a_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
+ .set_mode = act8945a_set_mode,
+ .get_mode = act8945a_get_mode,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = act8945a_set_suspend_enable,
+ .set_suspend_disable = act8945a_set_suspend_disable,
};
#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \
@@ -86,6 +240,7 @@ static const struct regulator_ops act8945a_ops = {
.name = _name, \
.supply_name = _supply, \
.of_match = of_match_ptr("REG_"#_id), \
+ .of_map_mode = act8945a_of_map_mode, \
.regulators_node = of_match_ptr("regulators"), \
.id = _family##_ID_##_id, \
.type = REGULATOR_VOLTAGE, \
@@ -124,13 +279,17 @@ static int act8945a_pmic_probe(struct platform_device *pdev)
{
struct regulator_config config = { };
const struct regulator_desc *regulators;
+ struct act8945a_pmic *act8945a;
struct regulator_dev *rdev;
- struct regmap *regmap;
int i, num_regulators;
bool voltage_select;
- regmap = dev_get_regmap(pdev->dev.parent, NULL);
- if (!regmap) {
+ act8945a = devm_kzalloc(&pdev->dev, sizeof(*act8945a), GFP_KERNEL);
+ if (!act8945a)
+ return -ENOMEM;
+
+ act8945a->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!act8945a->regmap) {
dev_err(&pdev->dev,
"could not retrieve regmap from parent device\n");
return -EINVAL;
@@ -149,6 +308,7 @@ static int act8945a_pmic_probe(struct platform_device *pdev)
config.dev = &pdev->dev;
config.dev->of_node = pdev->dev.parent->of_node;
+ config.driver_data = act8945a;
for (i = 0; i < num_regulators; i++) {
rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config);
if (IS_ERR(rdev)) {
@@ -159,13 +319,29 @@ static int act8945a_pmic_probe(struct platform_device *pdev)
}
}
+ platform_set_drvdata(pdev, act8945a);
+
/* Unlock expert registers. */
- return regmap_write(regmap, ACT8945A_SYS_UNLK_REGS, 0xef);
+ return regmap_write(act8945a->regmap, ACT8945A_SYS_UNLK_REGS, 0xef);
}
+static int act8945a_suspend(struct device *pdev)
+{
+ struct act8945a_pmic *act8945a = dev_get_drvdata(pdev);
+
+ /*
+ * Ask the PMIC to enter the suspend mode on the next PWRHLD
+ * transition.
+ */
+ return regmap_write(act8945a->regmap, ACT8945A_SYS_CTRL, 0x42);
+}
+
+SIMPLE_DEV_PM_OPS(act8945a_pm, act8945a_suspend, NULL);
+
static struct platform_driver act8945a_pmic_driver = {
.driver = {
.name = "act8945a-regulator",
+ .pm = &act8945a_pm,
},
.probe = act8945a_pmic_probe,
};
diff --git a/include/dt-bindings/regulator/active-semi,8945a-regulator.h b/include/dt-bindings/regulator/active-semi,8945a-regulator.h
new file mode 100644
index 000000000000..9bdba5e3141a
--- /dev/null
+++ b/include/dt-bindings/regulator/active-semi,8945a-regulator.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 Microchip Technology, Inc. All rights reserved.
+ *
+ * Device Tree binding constants for the ACT8945A PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_ACT8945A_H
+#define _DT_BINDINGS_REGULATOR_ACT8945A_H
+
+/*
+ * These constants should be used to specify regulator modes in device tree for
+ * ACT8945A regulators as follows:
+ * ACT8945A_REGULATOR_MODE_FIXED: It is specific to DCDC regulators and it
+ * specifies the usage of fixed-frequency
+ * PWM.
+ *
+ * ACT8945A_REGULATOR_MODE_NORMAL: It is specific to LDO regulators and it
+ * specifies the usage of normal mode.
+ *
+ * ACT8945A_REGULATOR_MODE_LOWPOWER: For DCDC and LDO regulators; it specify
+ * the usage of proprietary power-saving
+ * mode.
+ */
+
+#define ACT8945A_REGULATOR_MODE_FIXED 1
+#define ACT8945A_REGULATOR_MODE_NORMAL 2
+#define ACT8945A_REGULATOR_MODE_LOWPOWER 3
+
+#endif
--
2.7.4
