From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> We have prepared a new driver for the FSL QSPI controller that works under the SPI framework. The current devicetrees are broken because they use an inconsistent scheme for assigning the reg properties. As, in contrast to the current driver, the new driver will use the reg properties to select the correct chip, we need to fix them. We also add spi-[tx/rx]-bus-width to make sure the full buswidth will be used and while at it clean up and remove some unused properties. Frieder Schrempf (5): arm64: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller arch/arm/boot/dts/imx6sx-sdb-reva.dts | 8 ++++++-- arch/arm/boot/dts/imx6sx-sdb.dts | 8 ++++++-- arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 ++ arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 5 ++--- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 3 ++- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 4 ++-- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 6 ++++-- arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 4 ++++ 8 files changed, 28 insertions(+), 12 deletions(-) -- 2.7.4
