On Wed, Nov 28, 2018 at 07:21:03PM +0530, Manivannan Sadhasivam wrote:
> From: Andreas Färber <afaerber@xxxxxxx>
>
> Add an initial binding for the UART in RDA Micro RDA8810PL SoC.
>
> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
> .../bindings/serial/rda,8810pl-uart.txt | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
> new file mode 100644
> index 000000000000..ee03116d7415
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
> @@ -0,0 +1,15 @@
> +RDA Micro UART
> +
> +Required properties:
> +- compatible : "rda,8810pl-uart" for RDA8810PL SoCs.
> +- reg : Offset and length of the register set for the device.
> +- interrupts : Should contain UART interrupt.
Uarts generally need a clock.
> +
> +
> +Example:
> +
> + uart2: serial@20a90000 {
> + compatible = "rda,8810pl-uart";
> + reg = <0x20a90000 0x1000>;
> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
> + };
> --
> 2.17.1
>
