Hi Robert,
On 14.03.2014 11:13, Robert Baldyga wrote:
This patch adds device tree node for IRQ used by max8997.
Generally, this patch does not add just a node, but rather "IRQ line
specification for the MAX8997 PMIC chip and necessary pinctrl group to
configure pull-up and driver strength of the pin".
Also it would be nice to mention a reason for this change, e.g. what can
be achieved after applying this patch.
Otherwise looks good.
Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
--
Best regards,
Tomasz
Signed-off-by: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos4210-trats.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 1d18428..0e1fc19 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -148,6 +148,14 @@
};
};
+ pinctrl@11000000 {
+ max8997_irq: max8997-irq {
+ samsung,pins = "gpx0-7";
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
i2c@13890000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
@@ -179,6 +187,11 @@
max8997_pmic@66 {
compatible = "maxim,max8997-pmic";
+ pinctrl-0 = <&max8997_irq>;
+ pinctrl-names = "default";
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 0>;
reg = <0x66>;
max8997,pmic-buck1-uses-gpio-dvs;
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
